FreeBSD Manual Pages
QLXGE(4) FreeBSD Kernel Interfaces Manual QLXGE(4) NAME qlxge -- QLogic 8100 Series 10 Gigabit Ethernet Adapter Driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device qlxge To load the driver as a module at boot time, place the following line in loader.conf(5): if_qlxge_load="YES" DESCRIPTION The qlxge driver supports IPv4 checksum offload, TCP and UDP checksum offload for both IPv4 and IPv6, Large Segment Offload for both IPv4 and IPv6, Jumbo frames, VLAN Tag, and Receive Side scaling. For further hardware information, see http://www.qlogic.com/. HARDWARE The qlxge driver supports 10 Gigabit Ethernet & CNA Adapter based on the following chipsets: o QLogic 8100 series SUPPORT For support questions please contact your QLogic approved reseller or QLogic Technical Support at http://support.qlogic.com, or by E-mail at <support@qlogic.com>. SEE ALSO altq(4), arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY The qlxge device driver first appeared in FreeBSD 10.0. AUTHORS The qlxge driver was written by David C Somayajulu at QLogic Corporation. FreeBSD 13.0 June 21, 2013 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SUPPORT | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=qlxge&sektion=4&manpath=FreeBSD+13.1-RELEASE+and+Ports>