FreeBSD Manual Pages
REMOTETRX(1) User Manuals REMOTETRX(1) NAME remotetrx - The SvxLink remote transceiver application SYNOPSIS remotetrx [--help] [--daemon] [--logfile=log file] [--config=configura- tion file] [--pidfile=pid file] [--runasuser=user name] DESCRIPTION remotetrx is the SvxLink remote transceiver application. It is used to connect to a receiver and/or transmitter and then the main SvxLink server can connect to the remote transceiver server via TCP/IP to get audio to/from it. It is also possible to link via RF instead of via TCP/IP. An example use of the latter would be if the repeater is placed in a remote loca- tion where there is no network. Then networked remote receivers can be linked up to the repeater via RF from a link site where network is available. The setup is pretty straight forward. The setup of a receiver or trans- mitter is done in the same way as in the SvxLink server so use the svxlink.conf(5) manual page as a reference for that. The remotetrx spe- cific configuration is described in the remotetrx.conf(5) manual page. On the SvxLink server side you need to configure a networked re- ceiver/transmitter. That is described in the svxlink.conf(5) manual page in the Networked Receiver/Transmitter Section. If using multiple receivers you also want to configure a voter and make proper calibra- tion of the signal level detector on each receiver. OPTIONS --help Print a help message and exit. --daemon Start the SvxLink remote receiver server as a daemon. --runasuser Start RemoteTrx as the specified user. The switch to the new user will happen after the log and pid files has been opened. --logfile=log file Specify a log file to put all output into. Both stdout and stderr will be redirected to the log file. --pidfile=pid file Specify a pid file to write the process ID into. --config=configuration file Specify which configuration file to use. FILES /etc/svxlink/remotetrx.conf (or deprecated /etc/remotetrx.conf) The system wide configuration file. See remotetrx.conf(5) for further details. ~/.svxlink/remotetrx.conf Per user configuration file. See remotetrx.conf(5) for further details. /etc/svxlink/remotetrx.d/* Additional configuration files. This directory is setup by the CFG_DIR configuration variable. ENVIRONMENT ASYNC_AUDIO_NOTRIGGER Set this environment variable to 1 if you get an error about ioctl: Broken pipe during remotetrx server startup when using OSS audio. ASYNC_AUDIO_ALSA_ZEROFILL Set this environment variable to 1 to make the Alsa audio code write zeros to the audio device when there is no audio to write available. This may be needed for some audio devices that take a long time to recover from an underflow condition. HOME Used to find the per user configuration file. AUTHOR Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net> REPORTING BUGS SvxLink Devel <svxlink-devel at lists dot sourceforge dot net> SEE ALSO svxlink(1), remotetrx.conf(5), svxlink.conf(5), siglevdetcal(1) Linux JULY 2019 REMOTETRX(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | ENVIRONMENT | AUTHOR | REPORTING BUGS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=remotetrx&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>