FreeBSD Manual Pages
rr232x(4) FreeBSD Kernel Interfaces Manual rr232x(4) NAME rr232x -- HighPoint RocketRAID 232x device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device rr232x device scbus device da Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): rr232x_load="YES" DESCRIPTION The rr232x driver provides support for HighPoint's RocketRAID 232x series of RAID controllers. These devices support SATA disk drives and provide RAID 0, 1, and 5 functionality. Hardware acceleration for RAID 5 is also provided. Additionally, if multiple controllers are present, arrays may be built out of drives that are attached to different controllers. Online management is provided by utilities that are available for free download from http://www.highpoint-tech.com/. HARDWARE The rr232x driver supports the following hardware: o HighPoint RocketRAID 2320 o HighPoint RocketRAID 2322 NOTES The rr232x driver only works on the i386 and amd64 platforms. Also, while the driver can be loaded as a module, it must be loaded prior to boot. Loading it after boot will result in the hardware not being detected. SEE ALSO cam(4), loader.conf(5), loader(8) HISTORY The rr232x driver first appeared in FreeBSD 6.1. AUTHORS The rr232x driver was provided by HighPoint Technologies, Inc. This man- ual page was written by Scott Long <scottl@FreeBSD.org>. FreeBSD 6.2 April 27, 2006 FreeBSD 6.2
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | NOTES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rr232x&sektion=4&manpath=FreeBSD+6.2-RELEASE>