FreeBSD Manual Pages
rr232x(4) BSD Kernel Interfaces Manual rr232x(4) NAME rr232x -- HighPoint RocketRAID 232x device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device rr232x device scbus device da Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): rr232x_load="YES" DESCRIPTION The rr232x driver provides support for HighPoint's RocketRAID 232x series of RAID controllers. These devices support SATA disk drives and provide RAID 0, 1, and 5 functionality. Hardware acceleration for RAID 5 is also provided. Additionally, if multiple controllers are present, arrays may be built out of drives that are attached to different controllers. On- line management is provided by utilities that are available for free download from http://www.highpoint-tech.com/. HARDWARE The rr232x driver supports the following hardware: o HighPoint RocketRAID 2320 o HighPoint RocketRAID 2322 NOTES The rr232x driver only works on the i386 and amd64 platforms. Also, while the driver can be loaded as a module, it must be loaded prior to boot. Loading it after boot will result in the hardware not being de- tected. SEE ALSO cam(4), loader.conf(5), loader(8) HISTORY The rr232x driver first appeared in FreeBSD 6.1. AUTHORS The rr232x driver was provided by HighPoint Technologies, Inc. This man- ual page was written by Scott Long <scottl@FreeBSD.org>. BSD April 27, 2006 BSD
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | NOTES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rr232x&sektion=4&manpath=FreeBSD+6.3-RELEASE>