FreeBSD Manual Pages
rwsetcat(1) SiLK Tool Suite rwsetcat(1) NAME rwsetcat - Print the IP addresses in a binary IPset file SYNOPSIS rwsetcat [--count-ips] [--print-statistics] [--print-ips] [{ --cidr-blocks | --cidr-blocks=0 | --cidr-blocks=1 | --network-structure | --network-structure=STRUCTURE | --ip-ranges }] [--ip-format=FORMAT] [--integer-ips] [--zero-pad-ips] [--no-columns] [--column-separator=C] [--no-final-delimiter] [{--delimited | --delimited=C}] [--print-filenames | --print-filenames=0 | --print-filenames=1] [--output-path=PATH] [--pager=PAGER_PROG] [SET_FILE...] rwsetcat --help rwsetcat --version DESCRIPTION When run with no switches, rwsetcat reads each IPset file given on the command line and prints its constituent IP addresses to the standard output. If no file names are listed on the command line, rwsetcat attempts to read an IPset from the standard input. By default, an IPset containing only IPv4 addresses is printed with one IP address per line. For other IPsets, rwsetcat uses CIDR blocks when printing. The --cidr-blocks switch may be used to choose which representation is used. When processing a mix of IPv4 and IPv6 addresses, the SiLK tools that build IPsets (e.g., rwset(1), rwsetbuild(1)) map each IPv4 address into the ::ffff:0:0/96 IPv6 netblock. For example 192.0.2.1 becomes ::ffff:192.0.2.1 or ::ffff:c000:201. For releases prior to SiLK 3.17.0, rwsetcat always displayed these addresses as IPv6 in the ::ffff:0:0/96 netblock. Starting in SiLK 3.17.0, rwsetcat shows these addresses as IPv4 unless the "map-v4" argument is given to the --ip-format switch. rwsetcat can produce additional information about IPset files, such as the number of IPs they contain (use --count), the number of IPs in netblocks of arbitrary size (--network-structure), and the minimum and maximum IPs (--print-statistics). To create an IPset file from SiLK Flow records, use rwset(1). rwsetbuild(1) creates an IPset from textual input. An IPset may also be created by the --coverset switch on rwbagtool(1) and the --to-ipset switch of rwaggbagtool(1). To determine whether an IPset file contains an IP address, use rwsetmember(1). OPTIONS Option names may be abbreviated if the abbreviation is unique or is an exact match for an option. A parameter to an option may be specified as --arg=param or --arg param, though the first form is required for options that take optional parameters. --count-ips Print a count of the number of IP addresses in the IPset file. This switch disables the printing of the IP addresses in the IPset file. Use --print-ips to print the contents of the IPset in addition to the count. When --count-ips is specified and more than one IPset file is provided, rwsetcat prepends the name of the input file and a colon to the IP address count. See the description of the --print-filenames switch for more information. --print-statistics Print a summary of the IPset. The summary includes the minimum IP address, the maximum IP address, the number of IP addresses in the IPset, and the number of IPs in a specific set of netblocks. For an IPset containing only IPv4 addresses, the netblocks are /8, /16, /24, and /27, and the output includes what percentage of IPv4 address space is covered. For an IPv6 IPset, the netblock are /8, /16, /24, /32, /40, /48, /56, /64, /72, /80, /88, /96, /112, and /120. This switch disables the printing of the IP addresses in the IPset. Use --print-ips to print the contents of the IPset in addition to the statistics. When --print-statistics is specified and more than one IPset file is provided, rwsetcat prints the name of the input file, a colon, and a newline prior to printing the statistics. See the description of the --print-filenames switch for more information. --print-ips Force printing of the IP addresses, even when the --count-ips or --print-statistics option is provided. --cidr-blocks --cidr-blocks=0 --cidr-blocks=1 When an argument is not provided to the switch or when the argument is 1, group sequential IPs into the largest possible CIDR block and print CIDR blocks in the IPset file, If the argument is 0, print the individual IPs in the IPset file. By default, rwsetcat prints individual IPs for IPv4 IPsets and CIDR blocks for IPv6 IPsets. This switch may not be combined with the --ip-ranges or --network-structure switches. --ip-ranges Print the IPset in three pipe-delimited (|) columns where each row represents a contiguous IP range: the first column is the number of IPs in the range, the second is the start of the range, and the final is the end of the range. This prints the IPset in the fewest number of lines. This switch may not be combined with the --cidr-blocks or --network-structure switches. --network-structure --network-structure=STRUCTURE For each numeric value in STRUCTURE, group the IPs in the IPset into a netblock of that size and print the number of hosts and, optionally, print the number of smaller, occupied netblocks that each larger netblock contains. When STRUCTURE begins with "v6:", the IPs in the IPset are treated as IPv6 addresses, and any IPv4 addresses are mapped into the ::ffff:0:0/96 netblock. Otherwise, the IPs are treated as IPv4 addresses, and any IPv6 address outside the ::ffff:0:0/96 netblock is ignored. Aside from the initial "v6:" (or "v4:", for consistency), STRUCTURE has one of following forms: 1. NETBLOCK_LIST/SUMMARY_LIST. Group IPs into the sizes specified in either NETBLOCK_LIST or SUMMARY_LIST. rwsetcat prints a row for each occupied netblock specified in NETBLOCK_LIST, where the row lists the base IP of the netblock, the number of hosts, and the number of smaller, occupied netblocks having a size that appears in either NETBLOCK_LIST or SUMMARY_LIST. (The values in SUMMARY_LIST are only summarized; they are not printed.) 2. NETBLOCK_LIST/. Similar to the first form, except all occupied netblocks are printed, and there are no netblocks that are only summarized. 3. NETBLOCK_LISTS. When the character "S" appears anywhere in the NETBLOCK_LIST, rwsetcat provides a default value for the SUMMARY_LIST. That default is 8,16,24,27 for IPv4, and 48,64 for IPv6. rwsetcat ignores "S" if "/" is present. 4. NETBLOCK_LIST. When neither "S" nor "/" appear in STRUCTURE, the output does not include the number of smaller, occupied netblocks. 5. Empty. When STRUCTURE is empty or only contains "v6:" or "v4:", the NETBLOCK_LIST prints a single row for the total network (the /0 netblock) giving the number of hosts and the number of smaller, occupied netblocks using the same default list specified in form 3. NETBLOCK_LIST and SUMMARY_LIST contain a comma separated list of numbers between 0 (the total network) and the size for an individual host (32 for IPv4 or 128 for IPv6). The characters "T" and "H" may be used as aliases for 0 and the host netblock, respectively. In addition, when parsing the lists as IPv4 netblocks, the characters "A", "B", "C", and "X" are supported as aliases for 8, 16, 24, and 27, respectively. A comma is not required between adjacent letters. The --network-structure switch disables printing of the IPs in the IPset file; specify the "H" argument to the switch to print each individual IP address. This switch may not be combined with the --cidr-blocks or --ip-ranges switches. --ip-format=FORMAT Specify how IP addresses are printed, where FORMAT is a comma- separated list of the arguments described below. When this switch is not specified, the SILK_IP_FORMAT environment variable is checked for a value and that format is used if it is valid. The default FORMAT is "canonical","unmap-v6". (The default presentation of IPv4 addresses in a mixed IPv4-IPv6 IPset changed in SiLK 3.17.0 as described above in "DESCRIPTION".) Since SiLK 3.7.0. canonical Print IP addresses in the canonical format. For an IPv4 address, use dot-separated decimal (192.0.2.1). Also use dot- separated decimal for IPv4-mapped IPv6 addresses (addresses in the ::ffff:0:0/96 netblock) unless FORMAT includes "map-v4". For other IPv6 addresses, use either colon-separated hexadecimal ("2001:db8::1") or a mixed IPv4-IPv6 representation for IPv4-compatible IPv6 addresses (the ::/96 netblock other than ::/127, e.g., "::192.0.2.1"). When "map-v4" is part of the argument, use the mixed representation for IPv4-mapped IPv6 addresses (the ::ffff:0:0/96 netblock, e.g., "::ffff:192.0.2.1"). no-mixed Print IP addresses in the canonical format (192.0.2.1 or "2001:db8::1") but do not used the mixed IPv4-IPv6 representations. For example, use "::c000:201" instead of "::192.0.2.1". When FORMAT includes "map-v4", also use "::ffff:c000:201" instead of "::ffff:192.0.2.1". Since SiLK 3.17.0. decimal Print IP addresses as integers in decimal format. For example, print 192.0.2.1 and "2001:db8::1" as 3221225985 and 42540766411282592856903984951653826561, respectively. Values in the ::ffff:0:0/96 netblock are not converted to IPv4 unless "unmap-v6" is explicitly given. hexadecimal Print IP addresses as integers in hexadecimal format. For example, print 192.0.2.1 and "2001:db8::1" as "c00000201" and "20010db8000000000000000000000001", respectively. Values in the ::ffff:0:0/96 netblock are not converted to IPv4 unless "unmap-v6" is explicitly given. Note: This setting does not apply to CIDR prefix values which are printed as decimal. zero-padded Make all IP address strings contain the same number of characters by padding numbers with leading zeros. For example, print 192.0.2.1 and "2001:db8::1" as 192.000.002.001 and "2001:0db8:0000:0000:0000:0000:0000:0001", respectively. For IPv6 addresses, this setting implies "no-mixed", so that "::192.0.2.1" is printed as "0000:0000:0000:0000:0000:0000:c000:0201". As of SiLK 3.17.0, may be combined with any of the above, including "decimal" and "hexadecimal". IPv4-mapped IPv6 addresses are printed as IPv6 unless FORMAT also includes "map-v4", "decimal", or "hexadecimal". As of SiLK 3.18.0, the values of CIDR prefix are also zero-padded. The following arguments modify certain IP addresses prior to printing. These arguments may be combined with the above formats. map-v4 When the IPset contains only IPv4 addresses, change all IPv4 addresses to IPv4-mapped IPv6 addresses (addresses in the ::ffff:0:0/96 netblock) prior to formatting. For an IPset containing IPv6 addresses, do not map addresses in the ::ffff:0:0/96 netblock to IPv4. Since SiLK 3.17.0. unmap-v6 When the IPset contains IPv6 addresses, change any IPv4-mapped IPv6 addresses (addresses in the ::ffff:0:0/96 netblock) to IPv4 addresses prior to formatting. This argument is enabled by default for the "canonical" and "no-mixed" formats. Since SiLK 3.17.0. The following argument is also available: force-ipv6 Set FORMAT to "map-v4","no-mixed". --integer-ips Print IP addresses as integers. This switch is equivalent to --ip-format=decimal, it is deprecated as of SiLK 3.7.0, and it will be removed in the SiLK 4.0 release. --zero-pad-ips Print IP addresses as fully-expanded, zero-padded values in their canonical form. This switch is equivalent to --ip-format=zero-padded, it is deprecated as of SiLK 3.7.0, and it will be removed in the SiLK 4.0 release. --no-columns Disable fixed-width columnar output when printing the output from the --network-structure or --ip-ranges switch. --column-separator=C Use specified character between columns produced by the --network-structure and --ip-ranges switches. This character is also used after the final column when --ip-ranges is specified. When this switch is not specified, the default of '|' is used. --no-final-delimiter Do not print the column separator after the final column in the output produced by --ip-ranges. Normally a delimiter is printed. --delimited --delimited=C Run as if --no-columns --no-final-delimiter --column-sep=C had been specified. That is, disable fixed-width columnar output; if character C is provided, it is used as the delimiter between columns instead of the default '|'. --print-filenames --print-filenames=0 --print-filenames=1 If an argument is not provided to the switch or if the argument is 1, print the name of the IPset file prior to printing information about the IPset file regardless of the number of IPset files specified on the command line or the type of information to be printed. If the switch is provided and its argument is 0, suppress printing the name of the IPset file regardless of the number of IPset files or type of information. When the switch is not provided, rwsetcat's behavior depends on the type of information to be printed and on the number of input IPset files: If multiple IPset files are provided and --count-ips or --print-statistics is given, rwsetcat prints the name of a file, a colon (:), a newline (unless --count-ips was specified), and the requested information; otherwise, rwsetcat does not print the file name. --output-path=PATH Write the textual output to PATH, where PATH is a filename, a named pipe, the keyword "stderr" to write the output to the standard error, or the keyword "stdout" or "-" to write the output to the standard output (and bypass the paging program). If PATH names an existing file, rwsetcat exits with an error unless the SILK_CLOBBER environment variable is set, in which case PATH is overwritten. If this switch is not given, the output is either sent to the pager or written to the standard output. Since SiLK 3.15.0. --pager=PAGER_PROG When output is to a terminal, invoke the program PAGER_PROG to view the output one screen full at a time. This switch overrides the SILK_PAGER environment variable, which in turn overrides the PAGER variable. If the --output-path switch is given or if the value of the pager is determined to be the empty string, no paging is performed and all output is written to the terminal. --help Print the available options and exit. --version Print the version number and information about how SiLK was configured, then exit the application. EXAMPLES In the following examples, the dollar sign ($) represents the shell prompt. Some input lines are split over multiple lines in order to improve readability, and a backslash (\) is used to indicate such lines. The file sample.set contains an IPset of IPv4 addresses, and the file set1-v6.set contains an IPset of IPv6 addresses. Producing simple output with an IPv4 IPset By default, rwsetcat prints the contents of an IPset. $ rwsetcat sample.set 10.1.2.250 10.1.2.251 10.1.2.252 10.1.2.253 10.1.2.254 10.1.2.255 10.1.3.0 10.1.3.1 10.1.3.2 10.1.3.3 10.1.3.4 Use the --cidr-blocks switch to print the contents in CIDR notation. $ rwsetcat --cidr-blocks sample.set 10.1.2.250/31 10.1.2.252/30 10.1.3.0/30 10.1.3.4 Add the --ip-format switch to change how the IPs are presented. For text-based sorting, use the --ip-format=zero-padded switch to force three digits per octet. $ rwsetcat --ip-format=zero-padded --cidr-blocks sample.set 010.001.002.250/31 010.001.002.252/30 010.001.003.000/30 010.001.003.004 For numerical sorting, print the IPs as integers. $ rwsetcat --ip-format=decimal sample.set 167838458 167838459 167838460 167838461 167838462 167838463 167838464 167838465 167838466 167838467 167838468 Getting simple output for an IPv6 IPset When printing an IPset containing IPv6 addresses, addresses are grouped into CIDR blocks by default. $ rwsetcat set1-v6.set 2001:db8:0:5::/68 2001:db8:0:5:f000::/68 2001:db8:0:c::/67 2001:db8:0:c:4000::/66 2001:db8:0:f:8000::/65 2001:db8:0:11::/64 2001:db8:0:12::/63 2001:db8:0:14::/62 2001:db8:0:18::/61 2001:db8:0:20::/60 2001:db8:0:40::/59 Specify an argument of 0 to the --cidr-blocks switch to see the individual IPs. $ rwsetcat --cidr-blocks=0 set1-v6.set | head -4 2001:db8:0:5:: 2001:db8:0:5::1 2001:db8:0:5::2 2001:db8:0:5::3 Finding the number of IPs in an IPset The --count-ips switch prints the number IPs in the IPset. $ rwsetcat --count-ips sample.set 11 $ rwsetcat --count-ips set1-v6.set 1180591620717411303424 The number of IPs may also be produced using the --network-structure switch as described below. Viewing IP ranges To see contiguous IPs printed as ranges, use the --ip-ranges switch. The output has three columns that contain the length of the range, its starting IP, and its ending IP. $ rwsetcat --ip-ranges sample.set 11| 10.1.2.250| 10.1.3.4| Since contiguous but different-sized CIDR blocks can be combined into a single range, the --ip-ranges switch prints the IPset in the first number of rows. Add the --ip-format=decimal switch to see contiguous IPs printed as ranges of integers. $ rwsetcat --ip-ranges --ip-format=decimal sample.set 11| 167838458| 167838468| Use the --delimited switch to produce the same output as a list of comma separated values. $ rwsetcat --ip-ranges --ip-format=decimal --delimited=, sample.set 11,167838458,167838468 The UNIX cut(1) tool can be used to remove the number of IPs in the range, so that the output only contains the starting and ending IPs. $ rwsetcat --ip-ranges --ip-format=decimal --delimited=, sample.set \ | cut -d"," -f2,3 167838458,167838468 $ rwsetcat --ip-ranges set1-v6.set | cut -d'|' -f2,3 2001:db8:0:5::| 2001:db8::5:fff:ffff:ffff:ffff 2001:db8:0:5:f000::| 2001:db8::5:ffff:ffff:ffff:ffff 2001:db8:0:c::| 2001:db8::c:1fff:ffff:ffff:ffff 2001:db8:0:c:4000::| 2001:db8::c:7fff:ffff:ffff:ffff 2001:db8:0:f:8000::| 2001:db8::f:ffff:ffff:ffff:ffff 2001:db8:0:11::| 2001:db8::2f:ffff:ffff:ffff:ffff 2001:db8:0:40::| 2001:db8::5f:ffff:ffff:ffff:ffff Reading an IPset from the standard input rwsetcat will read the IPset file from the standard input when no file name is given on the command line. An IP address converter is created by having the input to rwsetcat be the output from rwsetbuild(1). $ echo 10.10.10.10 | rwsetbuild | rwsetcat --ip-format=decimal 168430090 To see the unique source and destination IP addresses in the SiLK Flow file data.rw, use rwset(1) to generate an IPset and send the output of rwset to the standard input of rwsetcat. $ rwset --any-file=stdout data.rw | rwsetcat | head -4 10.4.52.235 10.5.231.251 10.9.77.117 10.11.88.88 Getting multiple types of output To see the contents of the IPset and also get a count of IPs, use multiple options. $ rwsetcat --count-ips --cidr-blocks sample.set 11 10.1.2.250/31 10.1.2.252/30 10.1.3.0/30 10.1.3.4 Working with multiple IPset files When multiple IPset files are specified on the command line, rwsetcat prints the contents of each file one after the other. $ rwsetcat --cidr-blocks=1 sample.set set1-v6.set 10.1.2.250/31 10.1.2.252/30 10.1.3.0/30 10.1.3.4 2001:db8:0:5::/68 2001:db8:0:5:f000::/68 2001:db8:0:c::/67 2001:db8:0:c:4000::/66 2001:db8:0:f:8000::/65 2001:db8:0:11::/64 2001:db8:0:12::/63 2001:db8:0:14::/62 2001:db8:0:18::/61 2001:db8:0:20::/60 2001:db8:0:40::/59 To print the union of multiple the IPset files, use rwsettool(1) to join the files and have rwsetcat print the result. $ rwsettool --union set1-v6.set sample.set \ | rwsetcat --cidr-blocks=1 10.1.2.250/127 10.1.2.252/126 10.1.3.0/126 10.1.3.4 2001:db8:0:5::/68 2001:db8:0:5:f000::/68 2001:db8:0:c::/67 2001:db8:0:c:4000::/66 2001:db8:0:f:8000::/65 2001:db8:0:11::/64 2001:db8:0:12::/63 2001:db8:0:14::/62 2001:db8:0:18::/61 2001:db8:0:20::/60 2001:db8:0:40::/59 When counting the IPs in multiple IPset files, rwsetcat prepends the file name and a colon to the count. (The "-" argument causes rwsetcat to read the standard input in addition to the named file.) $ cat set1-v6.set | rwsetcat --count-ips sample.set - sample.set:11 -:1180591620717411303424 Provide an argument of 0 to --print-filenames to suppress printing of the input IPset file name. $ cat set1-v6.set \ | rwsetcat --count-ips --print-filenames=0 sample.set - 11 1180591620717411303424 Use the --print-filenames switch to force rwsetcat to print the file name when only one IPset is given. $ rwsetcat --count-ips --print-filenames sample.set sample.set:11 The --print-filenames switch also causes rwsetcat to print the file name when it normally would not. $ rwsetcat --ip-ranges --ip-format=decimal --print-filenames sample.set sample.set: 11| 167838458| 167838468| Seeing which netblocks are occupied The --network-structure switch counts and prints information about which netblocks are occupied. The default output when no argument is given to the switch is a single line. $ rwsetcat --network sample.set TOTAL| 11 hosts in 1 /8, 1 /16, 2 /24s, and 2 /27s The default is equivalent to an argument of "TS". $ rwsetcat --network=TS sample.set TOTAL| 11 hosts in 1 /8, 1 /16, 2 /24s, and 2 /27s An argument of "T" suppresses the subnet counts, and the output is the number of IPs in the IPset. $ rwsetcat --network=T sample.set TOTAL| 11 The argument "T" is equivalent to the 0 netblock. $ rwsetcat --network=0 sample.set TOTAL| 11 The subnets represented by "S" are 8, 16, 24, and 27. A different set of subnets to summarize may be specified by giving those subnets after a slash: $ rwsetcat --network=T/12,18,30 sample.set TOTAL| 11 hosts in 1 /12, 1 /18, and 4 /30s The presence of a slash causes rwsetcat to ignore "S". $ rwsetcat --network=TS/12,18 sample.set TOTAL| 11 hosts in 1 /12 and 1 /18 Putting a number in front of the slash adds a row the output for each netblock of that size that is occupied. $ rwsetcat --network=30T/12,18 sample.set 10.1.2.248/30 | 2 hosts 10.1.2.252/30 | 4 hosts 10.1.3.0/30 | 4 hosts 10.1.3.4/30 | 1 host TOTAL | 11 hosts in 1 /12, 1 /18, and 4 /30s For each row, the number of smaller, occupied netblocks is printed. $ rwsetcat --network=12,18/30 sample.set 10.1.0.0/18 | 11 hosts in 4 /30s 10.0.0.0/12 | 11 hosts in 1 /18 and 4 /30s TOTAL | 11 hosts in 1 /12, 1 /18, and 4 /30s Although no numbers are required to follow the slash, the argument must include the slash for rwsetcat to produce the counts for each subnet. $ rwsetcat --network=16,24/ sample.set 10.1.2.0/24 | 6 hosts 10.1.3.0/24 | 5 hosts 10.1.0.0/16 | 11 hosts in 2 /24s $ rwsetcat --network=16,24 sample.set 10.1.2.0/24 | 6 10.1.3.0/24 | 5 10.1.0.0/16 | 11 For historical reasons, "A", "B", "C", and "X" are equivalent to the 8, 16, 24, and 27 netblocks. $ rwsetcat --network=B,C sample.set 10.1.2.0/24 | 6 10.1.3.0/24 | 5 10.1.0.0/16 | 11 Adding an argument of "H" tells rwsetcat to print the hosts. $ rwsetcat --network=ABCXHST sample.set 10.1.2.250 | 10.1.2.251 | 10.1.2.252 | 10.1.2.253 | 10.1.2.254 | 10.1.2.255 | 10.1.2.224/27 | 6 hosts 10.1.2.0/24 | 6 hosts in 1 /27 10.1.3.0 | 10.1.3.1 | 10.1.3.2 | 10.1.3.3 | 10.1.3.4 | 10.1.3.0/27 | 5 hosts 10.1.3.0/24 | 5 hosts in 1 /27 10.1.0.0/16 | 11 hosts in 2 /24s and 2 /27s 10.0.0.0/8 | 11 hosts in 1 /16, 2 /24s, and 2 /27s TOTAL | 11 hosts in 1 /8, 1 /16, 2 /24s, and 2 /27s The --network-structure switch defaults to treating the input as an IPset containing only IPv4 addresses. The results when running it on the IPv6 IPset file set1-v6.set are odd. $ rwsetcat --network=TS set1-v6.set TOTAL| 0 hosts in 0 /8s, 0 /16s, 0 /24s, and 0 /27s The "v6:" prefix is required for rwsetcat to treat the input as IPv6. $ rwsetcat --network=v6:TS set1-v6.set TOTAL| 1180591620717411303424 hosts in 1 /48 and 66 /64s As shown in that example, when the "v6:" prefix is given, the "S" character represents the 48 and 64 netblocks. The characters "A", "B", "C", and "X" are not allowed when treating the input as IPv6. $ rwsetcat --network=v6:A set1-v6.set rwsetcat: Invalid network-structure character 'A' The "H" character still represents the hosts. $ rwsetcat --network=v6:H set1-v6.set | head -4 2001:db8:0:5::| 2001:db8:0:5::1| 2001:db8:0:5::2| 2001:db8:0:5::3| When processing an IPv4 IPset as though it is IPv6, the IPv4 hosts are mapped into the ::ffff:0:0/96 netblock. (This is similar to passing a value of "force" to the --ipv6-policy switch on tools such as rwcut(1).) $ rwsetcat --network=v6:96TS sample.set ::ffff:0.0.0.0/96 | 11 hosts TOTAL | 11 hosts in 1 /48, 1 /64, and 1 /96 When the "v6:" prefix is not present and --network-structure is used on an IPset containing IPv6 addresses, only those addresses in the ::ffff:0:0/96 netblock are visible to rwsetcat. This is similar to giving the --ipv6-policy switch an argument of "asv4". $ rwsettool --union set1-v6.set sample.set | rwsetcat --network=v6:TS TOTAL| 1180591620717411303435 hosts in 2 /48s and 67 /64s $ rwsettool --union set1-v6.set sample.set | rwsetcat --network=TS TOTAL| 11 hosts in 1 /8, 1 /16, 2 /24s, and 2 /27s Seeing a summary of an IPset Use --print-statistics to get a summary of the IPset file. $ rwsetcat --print-statistics --print-filenames sample.set sample.set: Network Summary minimumIP = 10.1.2.250 maximumIP = 10.1.3.4 11 hosts (/32s), 0.000000% of 2^32 1 occupied /8, 0.390625% of 2^8 1 occupied /16, 0.001526% of 2^16 2 occupied /24s, 0.000012% of 2^24 2 occupied /27s, 0.000001% of 2^27 $ rwsetcat --print-statistics set1-v6.set Network Summary minimumIP = 2001:db8:0:5:: maximumIP = 2001:db8::5f:ffff:ffff:ffff:ffff 1 occupied /8 1 occupied /16 1 occupied /24 1 occupied /32 1 occupied /40 1 occupied /48 1 occupied /56 66 occupied /64s 16384 occupied /72s 4194304 occupied /80s 1073741824 occupied /88s 274877906944 occupied /96s 70368744177664 occupied /104s 18014398509481984 occupied /112s 4611686018427387904 occupied /120s 1180591620717411303424 hosts (/128s) ENVIRONMENT SILK_IP_FORMAT This environment variable is used as the value for --ip-format when that switch is not provided. Since SiLK 3.11.0. SILK_PAGER When set to a non-empty string, rwsetcat automatically invokes this program to display its output a screen at a time. If set to an empty string, rwsetcat does not automatically page its output. PAGER When set and SILK_PAGER is not set, rwsetcat automatically invokes this program to display its output a screen at a time. SILK_CLOBBER The SiLK tools normally refuse to overwrite existing files. Setting SILK_CLOBBER to a non-empty value removes this restriction. SEE ALSO rwset(1), rwsetbuild(1), rwsettool(1), rwsetmember(1), rwbagtool(1), rwcut(1), silk(7), cut(1) SiLK 3.19.1 2021-02-28 rwsetcat(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | ENVIRONMENT | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rwsetcat&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>