FreeBSD Manual Pages
sane-magicolor(5) SANE Scanner Access Now Easy sane-magicolor(5) NAME sane-magicolor - SANE backend for KONICA MINOLTA magicolor scanners DESCRIPTION The sane-magicolor backend supports KONICA MINOLTA magicolor scanners connected via USB or LAN. Currently, only the magicolor 1690MF device is supported, no other devices with the same scanning protocol are known. SUPPORTED DEVICES The following scanner should work with this backend: Device Details ----------------------------- Vendor: KONICA MINOLTA Model: magicolor 1690MF CONFIGURATION This section describes the backend's configuration file entries. The file is located at: /usr/local/etc/sane.d/magicolor.conf For a proper setup, at least one of the following entries are needed: net autodiscovery net [IP ADDRESS] [DEVICE-ID] usb usb [VENDOR-ID] [DEVICE-ID] FILES /usr/local/etc/sane.d/magicolor.conf The backend configuration file /usr/local/lib/sane/libsane-magicolor.a The static library implementing this backend. /usr/local/lib/sane/libsane-magicolor.so The shared library implementing this backend (present on systems that support dynamic loading). ENVIRONMENT SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable is not set, the config- uration file is searched in two default directories: first, the current working directory (".") and then in /usr/lo- cal/etc/sane.d. If the value of the environment variable ends with the directory separator character, then the default direc- tories are searched after the explicitly specified directories. For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re- sult in directories "/tmp/config", ".", and "/usr/lo- cal/etc/sane.d" being searched (in this order). SANE_DEBUG_MAGICOLOR If the library was compiled with debug support enabled, this en- vironment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. Example: export SANE_DEBUG_MAGICOLOR=127 To obtain debug messages from the backend, set this environment variable before calling your favorite frontend (e.g. xscanim- age). Example: SANE_DEBUG_MAGICOLOR=65 xscanimage KNOWN BUGS AND RESTRICTIONS Large color scans may sometimes timeout due to unknown reasons (the scanner simply stops returning data) Cancelling large scans may lock up the scanner. SEE ALSO sane(7), http://wiki.kainhofer.com/hardware/magicolor_scan AUTHOR Reinhold Kainhofer <reinhold@kainhofer.com> 10 Jan 2011 sane-magicolor(5)
NAME | DESCRIPTION | SUPPORTED DEVICES | CONFIGURATION | FILES | ENVIRONMENT | KNOWN BUGS AND RESTRICTIONS | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sane-magicolor&sektion=5&manpath=FreeBSD+13.0-RELEASE+and+Ports>