Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-sm3600(5)		 SANE Scanner Access Now Easy		sane-sm3600(5)

NAME
       sane-sm3600 - SANE backend for Microtek scanners	with M011 USB chip

DESCRIPTION
       The  sane-sm3600	 library  implements  a	SANE (Scanner Access Now Easy)
       backend that provides access to some Microtek scanners with the Toshiba
       M011 custom USB chip.  This backend should be considered	alpha.

       There  are  also	 backends for Microtek scanners	with SCSI command set.
       Refer to	sane-microtek(5) and sane-microtek2(5) for details.

       At present, the following scanners are known positively	to  work  with
       this backend:

	      Vendor	 Product id:	 Remark:
	      --------	 --------------	 -----------
	      Microtek	 ScanMaker 3600	 all modes ok
	      Microtek	 ScanMaker 3700	 reported to work
	      Microtek	 ScanMaker 3750	 reported to work

       If  you	own  a Microtek	scanner	with the M011 chip other than the ones
       listed above, it	may or may not work with SANE!

FRONTEND OPTIONS
       This backend dynamically	enables	the options for	the frontend, that are
       supported  by  the scanner dependent on the scanning-mode and other op-
       tions. Unsupported options are disabled.

       The following options are supported by the sane-sm3600 backend:	Color,
       grayscale,  halftone and	lineart	scans.	Also contrast, brightness, and
       gamma correction.

DEVICE NAMES
       This backend does not support device names in a standardized form.

CONFIGURATION
       This backend does not support a configuration file right	now.

FILES
       /usr/local/lib/sane/libsane-sm3600.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-sm3600.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_DEBUG_SM3600
	      If the library was compiled with debug support enabled, this en-
	      vironment	variable controls the debug level  for	this  backend.
	      E.g.,  a	value  of 128 requests all debug output	to be printed.
	      Smaller levels reduce verbosity. To see error messages on	stderr
	      set SANE_DEBUG_SM3600 to 1.

	      E.g. just	say:
	      export SANE_DEBUG_SM3600=5

SEE ALSO
       sane(7),	sane-microtek(5), sane-microtek2(5)
       http://sm3600.sourceforge.net

AUTHOR
       Marian Eichholz <eichholz@computer.org>
       Glenn Ramsey <glenn@componic.com>

				  14 Jul 2008			sane-sm3600(5)

NAME | DESCRIPTION | FRONTEND OPTIONS | DEVICE NAMES | CONFIGURATION | FILES | ENVIRONMENT | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sane-sm3600&sektion=5&manpath=FreeBSD+13.1-RELEASE+and+Ports>

home | help