Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
SEND(2)			    BSD	System Calls Manual		       SEND(2)

     send, sendto, sendmsg, sendmmsg --	send message(s)	from a socket

     Standard C	Library	(libc, -lc)

     #include <sys/types.h>
     #include <sys/socket.h>

     send(int s, const void *msg, size_t len, int flags);

     sendto(int	s, const void *msg, size_t len,	int flags,
	 const struct sockaddr *to, socklen_t tolen);

     sendmsg(int s, const struct msghdr	*msg, int flags);

     sendmmsg(int s, struct mmsghdr * restrict msgvec, size_t vlen,
	 int flags);

     The send()	and sendmmsg() functions, and sendto() and sendmsg() system
     calls are used to transmit	one or more messages (with the sendmmsg()
     call) to another socket.  The send() function may be used only when the
     socket is in a connected state, while sendto(), sendmsg() and sendmmsg()
     may be used at any	time.

     The address of the	target is given	by to with tolen specifying its	size.
     The length	of the message is given	by len.	 If the	message	is too long to
     pass atomically through the underlying protocol, the error	EMSGSIZE is
     returned, and the message is not transmitted.

     The sendmmsg() function sends multiple messages at	a call.	 They are
     given by the msgvec vector	along with vlen	specifying the vector size.
     The number	of octets sent per each	message	is placed in the msg_len field
     of	each processed element of the vector after transmission.

     No	indication of failure to deliver is implicit in	a send().  Locally de-
     tected errors are indicated by a return value of -1.

     If	no messages space is available at the socket to	hold the message to be
     transmitted, then send() normally blocks, unless the socket has been
     placed in non-blocking I/O	mode.  The select(2) system call may be	used
     to	determine when it is possible to send more data.

     The flags argument	may include one	or more	of the following:

     #define MSG_OOB	     0x00001 /*	process	out-of-band data */
     #define MSG_DONTROUTE   0x00004 /*	bypass routing,	use direct interface */
     #define MSG_EOR	     0x00008 /*	data completes record */
     #define MSG_EOF	     0x00100 /*	data completes transaction */
     #define MSG_NOSIGNAL    0x20000 /*	do not generate	SIGPIPE	on EOF */

     The flag MSG_OOB is used to send "out-of-band" data on sockets that sup-
     port this notion (e.g. SOCK_STREAM); the underlying protocol must also
     support "out-of-band" data.  MSG_EOR is used to indicate a	record mark
     for protocols which support the concept.  MSG_EOF requests	that the
     sender side of a socket be	shut down, and that an appropriate indication
     be	sent at	the end	of the specified data; this flag is only implemented
     for SOCK_STREAM sockets in	the PF_INET protocol family.  MSG_DONTROUTE is
     usually used only by diagnostic or	routing	programs.  MSG_NOSIGNAL	is
     used to prevent SIGPIPE generation	when writing a socket that may be

     See recv(2) for a description of the msghdr structure and the mmsghdr

     The send(), sendto() and sendmsg()	calls return the number	of octets
     sent.  The	sendmmsg() call	returns	the number of messages sent.  If an
     error occurred a value of -1 is returned.

     The send()	and sendmmsg() functions and sendto() and sendmsg() system
     calls fail	if:

     [EBADF]		An invalid descriptor was specified.

     [EACCES]		The destination	address	is a broadcast address,	and
			SO_BROADCAST has not been set on the socket.

     [ENOTSOCK]		The argument s is not a	socket.

     [EFAULT]		An invalid user	space address was specified for	an ar-

     [EMSGSIZE]		The socket requires that message be sent atomically,
			and the	size of	the message to be sent made this im-

     [EAGAIN]		The socket is marked non-blocking and the requested
			operation would	block.

     [ENOBUFS]		The system was unable to allocate an internal buffer.
			The operation may succeed when buffers become avail-

     [ENOBUFS]		The output queue for a network interface was full.
			This generally indicates that the interface has
			stopped	sending, but may be caused by transient	con-

     [EHOSTUNREACH]	The remote host	was unreachable.

     [EISCONN]		A destination address was specified and	the socket is
			already	connected.

     [ECONNREFUSED]	The socket received an ICMP destination	unreachable
			message	from the last message sent.  This typically
			means that the receiver	is not listening on the	remote

     [EHOSTDOWN]	The remote host	was down.

     [ENETDOWN]		The remote network was down.

     [EADDRNOTAVAIL]	The process using a SOCK_RAW socket was	jailed and the
			source address specified in the	IP header did not
			match the IP address bound to the prison.

     [EPIPE]		The socket is unable to	send anymore data
			(SBS_CANTSENDMORE has been set on the socket).	This
			typically means	that the socket	is not connected.

     fcntl(2), getsockopt(2), recv(2), select(2), socket(2), write(2)

     The send()	function appeared in 4.2BSD.  The sendmmsg() function appeared
     in	FreeBSD	11.0.

     Because sendmsg() does not	necessarily block until	the data has been
     transferred, it is	possible to transfer an	open file descriptor across an
     AF_UNIX domain socket (see	recv(2)), then close() it before it has	actu-
     ally been sent, the result	being that the receiver	gets a closed file de-
     scriptor.	It is left to the application to implement an acknowledgment
     mechanism to prevent this from happening.

BSD			       January 29, 2016				   BSD


Want to link to this manual page? Use this URL:

home | help