Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
SIGACTION(2)		    BSD	System Calls Manual		  SIGACTION(2)

     sigaction -- software signal facilities

     Standard C	Library	(libc, -lc)

     #include <signal.h>

     struct  sigaction {
	     void    (*sa_handler)(int);
	     void    (*sa_sigaction)(int, siginfo_t *, void *);
	     int     sa_flags;		     /*	see signal options below */
	     sigset_t sa_mask;		     /*	signal mask to apply */

     sigaction(int sig,	const struct sigaction * restrict act,
	 struct	sigaction * restrict oact);

     The system	defines	a set of signals that may be delivered to a process.
     Signal delivery resembles the occurrence of a hardware interrupt: the
     signal is normally	blocked	from further occurrence, the current thread
     context is	saved, and a new one is	built.	A process may specify a
     handler to	which a	signal is delivered, or	specify	that a signal is to be
     ignored.  A process may also specify that a default action	is to be taken
     by	the system when	a signal occurs.  A signal may also be blocked for a
     thread, in	which case it will not be delivered to that thread until it is
     unblocked.	 The action to be taken	on delivery is determined at the time
     of	delivery.  Normally, signal handlers execute on	the current stack of
     the thread.  This may be changed, on a per-handler	basis, so that signals
     are taken on a special signal stack.

     Signal routines normally execute with the signal that caused their	invo-
     cation blocked, but other signals may yet occur.  A global	signal mask
     defines the set of	signals	currently blocked from delivery	to a thread.
     The signal	mask for a thread is initialized from that of its parent (nor-
     mally empty).  It may be changed with a sigprocmask(2) or
     pthread_sigmask(3)	call, or when a	signal is delivered to the thread.

     When a signal condition arises for	a process or thread, the signal	is
     added to a	set of signals pending for the process or thread.  Whether the
     signal is directed	at the process in general or at	a specific thread de-
     pends on how it is	generated.  For	signals	directed at a specific thread,
     if	the signal is not currently blocked by the thread then it is delivered
     to	the thread.  For signals directed at the process, if the signal	is not
     currently blocked by all threads then it is delivered to one thread that
     does not have it blocked (the selection of	which is unspecified).	Sig-
     nals may be delivered any time a thread enters the	operating system
     (e.g., during a system call, page fault or	trap, or clock interrupt).  If
     multiple signals are ready	to be delivered	at the same time, any signals
     that could	be caused by traps are delivered first.	 Additional signals
     may be processed at the same time,	with each appearing to interrupt the
     handlers for the previous signals before their first instructions.	 The
     set of pending signals is returned	by the sigpending(2) system call.
     When a caught signal is delivered,	the current state of the thread	is
     saved, a new signal mask is calculated (as	described below), and the sig-
     nal handler is invoked.  The call to the handler is arranged so that if
     the signal	handling routine returns normally the thread will resume exe-
     cution in the context from	before the signal's delivery.  If the thread
     wishes to resume in a different context, then it must arrange to restore
     the previous context itself.

     When a signal is delivered	to a thread a new signal mask is installed for
     the duration of the process' signal handler (or until a sigprocmask(2)
     system call is made).  This mask is formed	by taking the union of the
     current signal mask set, the signal to be delivered, and the signal mask
     associated	with the handler to be invoked.

     The sigaction() system call assigns an action for a signal	specified by
     sig.  If act is non-zero, it specifies an action (SIG_DFL,	SIG_IGN, or a
     handler routine) and mask to be used when delivering the specified	sig-
     nal.  If oact is non-zero,	the previous handling information for the sig-
     nal is returned to	the user.

     The above declaration of struct sigaction is not literal.	It is provided
     only to list the accessible members.  See <sys/signal.h> for the actual
     definition.  In particular, the storage occupied by sa_handler and
     sa_sigaction overlaps, and	an application can not use both	simultane-

     Once a signal handler is installed, it normally remains installed until
     another sigaction() system	call is	made, or an execve(2) is performed.  A
     signal-specific default action may	be reset by setting sa_handler to
     SIG_DFL.  The defaults are	process	termination, possibly with core	dump;
     no	action;	stopping the process; or continuing the	process.  See the sig-
     nal list below for	each signal's default action.  If sa_handler is
     SIG_DFL, the default action for the signal	is to discard the signal, and
     if	a signal is pending, the pending signal	is discarded even if the sig-
     nal is masked.  If	sa_handler is set to SIG_IGN current and pending in-
     stances of	the signal are ignored and discarded.

     Options may be specified by setting sa_flags.  The	meaning	of the various
     bits is as	follows:

	   SA_NOCLDSTOP	   If this bit is set when installing a	catching func-
			   tion	for the	SIGCHLD	signal,	the SIGCHLD signal
			   will	be generated only when a child process exits,
			   not when a child process stops.

	   SA_NOCLDWAIT	   If this bit is set when calling sigaction() for the
			   SIGCHLD signal, the system will not create zombie
			   processes when children of the calling process
			   exit.  If the calling process subsequently issues a
			   wait(2) (or equivalent), it blocks until all	of the
			   calling process's child processes terminate,	and
			   then	returns	a value	of -1 with errno set to
			   ECHILD.  The	same effect of avoiding	zombie cre-
			   ation can also be achieved by setting sa_handler
			   for SIGCHLD to SIG_IGN.

	   SA_ONSTACK	   If this bit is set, the system will deliver the
			   signal to the process on a signal stack, specified
			   by each thread with sigaltstack(2).

	   SA_NODEFER	   If this bit is set, further occurrences of the de-
			   livered signal are not masked during	the execution
			   of the handler.

	   SA_RESETHAND	   If this bit is set, the handler is reset back to
			   SIG_DFL at the moment the signal is delivered.

	   SA_RESTART	   See paragraph below.

	   SA_SIGINFO	   If this bit is set, the handler function is assumed
			   to be pointed to by the sa_sigaction	member of
			   struct sigaction and	should match the prototype
			   shown above or as below in EXAMPLES.	 This bit
			   should not be set when assigning SIG_DFL or

     If	a signal is caught during the system calls listed below, the call may
     be	forced to terminate with the error EINTR, the call may return with a
     data transfer shorter than	requested, or the call may be restarted.
     Restart of	pending	calls is requested by setting the SA_RESTART bit in
     sa_flags.	The affected system calls include open(2), read(2), write(2),
     sendto(2),	recvfrom(2), sendmsg(2)	and recvmsg(2) on a communications
     channel or	a slow device (such as a terminal, but not a regular file) and
     during a wait(2) or ioctl(2).  However, calls that	have already committed
     are not restarted,	but instead return a partial success (for example, a
     short read	count).

     After a pthread_create(3) the signal mask is inherited by the new thread
     and the set of pending signals and	the signal stack for the new thread
     are empty.

     After a fork(2) or	vfork(2) all signals, the signal mask, the signal
     stack, and	the restart/interrupt flags are	inherited by the child.

     The execve(2) system call reinstates the default action for all signals
     which were	caught and resets all signals to be caught on the user stack.
     Ignored signals remain ignored; the signal	mask remains the same; signals
     that restart pending system calls continue	to do so.

     The following is a	list of	all signals with names as in the include file

     NAME	     Default Action	     Description
     SIGHUP	     terminate process	     terminal line hangup
     SIGINT	     terminate process	     interrupt program
     SIGQUIT	     create core image	     quit program
     SIGILL	     create core image	     illegal instruction
     SIGTRAP	     create core image	     trace trap
     SIGABRT	     create core image	     abort(3) call (formerly SIGIOT)
     SIGEMT	     create core image	     emulate instruction executed
     SIGFPE	     create core image	     floating-point exception
     SIGKILL	     terminate process	     kill program
     SIGBUS	     create core image	     bus error
     SIGSEGV	     create core image	     segmentation violation
     SIGSYS	     create core image	     non-existent system call invoked
     SIGPIPE	     terminate process	     write on a	pipe with no reader
     SIGALRM	     terminate process	     real-time timer expired
     SIGTERM	     terminate process	     software termination signal
     SIGURG	     discard signal	     urgent condition present on
     SIGSTOP	     stop process	     stop (cannot be caught or
     SIGTSTP	     stop process	     stop signal generated from
     SIGCONT	     discard signal	     continue after stop
     SIGCHLD	     discard signal	     child status has changed
     SIGTTIN	     stop process	     background	read attempted from
					     control terminal
     SIGTTOU	     stop process	     background	write attempted	to
					     control terminal
     SIGIO	     discard signal	     I/O is possible on	a descriptor
					     (see fcntl(2))
     SIGXCPU	     terminate process	     cpu time limit exceeded (see
     SIGXFSZ	     terminate process	     file size limit exceeded (see
     SIGVTALRM	     terminate process	     virtual time alarm	(see
     SIGPROF	     terminate process	     profiling timer alarm (see
     SIGWINCH	     discard signal	     Window size change
     SIGINFO	     discard signal	     status request from keyboard
     SIGUSR1	     terminate process	     User defined signal 1
     SIGUSR2	     terminate process	     User defined signal 2

     The sa_mask field specified in act	is not allowed to block	SIGKILL	or
     SIGSTOP.  Any attempt to do so will be silently ignored.

     The following functions are either	reentrant or not interruptible by sig-
     nals and are async-signal safe.  Therefore	applications may invoke	them,
     without restriction, from signal-catching functions or from a child
     process after calling fork(2) in a	multi-threaded process:

     Base Interfaces:

     _Exit(), _exit(), accept(), access(), alarm(), bind(), cfgetispeed(),
     cfgetospeed(), cfsetispeed(), cfsetospeed(), chdir(), chmod(), chown(),
     close(), connect(), creat(), dup(), dup2(), execl(), execle(), execv(),
     execve(), faccessat(), fchdir(), fchmod(),	fchmodat(), fchown(),
     fchownat(), fcntl(), fork(), fstat(), fstatat(), fsync(), ftruncate(),
     getegid(),	geteuid(), getgid(), getgroups(), getpeername(), getpgrp(),
     getpid(), getppid(), getsockname(), getsockopt(), getuid(), kill(),
     link(), linkat(), listen(), lseek(), lstat(), mkdir(), mkdirat(),
     mkfifo(), mkfifoat(), mknod(), mknodat(), open(), openat(), pause(),
     pipe(), poll(), pselect(),	pthread_sigmask(), raise(), read(),
     readlink(), readlinkat(), recv(), recvfrom(), recvmsg(), rename(),
     renameat(), rmdir(), select(), send(), sendmsg(), sendto(), setgid(),
     setpgid(),	setsid(), setsockopt(),	setuid(), shutdown(), sigaction(),
     sigaddset(), sigdelset(), sigemptyset(), sigfillset(), sigismember(),
     signal(), sigpending(), sigprocmask(), sigsuspend(), sleep(),
     sockatmark(), socket(), socketpair(), stat(), symlink(), symlinkat(),
     tcdrain(),	tcflow(), tcflush(), tcgetattr(), tcgetpgrp(), tcsendbreak(),
     tcsetattr(), tcsetpgrp(), time(), times(),	umask(), uname(), unlink(),
     unlinkat(), utime(), wait(), waitpid(), write().

     X/Open Systems Interfaces:

     sigpause(), sigset(), utimes().

     Realtime Interfaces:

     aio_error(), clock_gettime(), timer_getoverrun(), aio_return(),
     fdatasync(), sigqueue(), timer_gettime(), aio_suspend(), sem_post(),

     Base Interfaces not specified as async-signal safe	by POSIX:

     fpathconf(), pathconf(), sysconf().

     Base Interfaces not specified as async-signal safe	by POSIX, but planned
     to	be:

     ffs(), htonl(), htons(), memccpy(), memchr(), memcmp(), memcpy(),
     memmove(),	memset(), ntohl(), ntohs(), stpcpy(), stpncpy(), strcat(),
     strchr(), strcmp(), strcpy(), strcspn(), strlen(),	strncat(), strncmp(),
     strncpy(),	strnlen(), strpbrk(), strrchr(), strspn(), strstr(),
     strtok_r(), wcpcpy(), wcpncpy(), wcscat(),	wcschr(), wcscmp(), wcscpy(),
     wcscspn(),	wcslen(), wcsncat(), wcsncmp(),	wcsncpy(), wcsnlen(),
     wcspbrk(),	wcsrchr(), wcsspn(), wcsstr(), wcstok(), wmemchr(), wmemcmp(),
     wmemcpy(),	wmemmove(), wmemset().

     Extension Interfaces:

     accept4(),	bindat(), closefrom(), connectat(), eaccess(), ffsl(),
     ffsll(), flock(), fls(), flsl(), flsll(), futimesat(), pipe2(),
     strlcat().	 strlcpy(), strsep().

     In	addition, reading or writing errno is async-signal safe.

     All functions not in the above lists are considered to be unsafe with re-
     spect to signals.	That is	to say,	the behaviour of such functions	is un-
     defined when they are called from a signal	handler	that interrupted an
     unsafe function.  In general though, signal handlers should do little
     more than set a flag; most	other actions are not safe.

     Also, it is good practice to make a copy of the global variable errno and
     restore it	before returning from the signal handler.  This	protects
     against the side effect of	errno being set	by functions called from in-
     side the signal handler.

     The sigaction() function returns the value	0 if successful; otherwise the
     value -1 is returned and the global variable errno	is set to indicate the

     There are three possible prototypes the handler may match:

	   ANSI	C:
		  void handler(int);

	   Traditional BSD style:
		  void handler(int, int	code, struct sigcontext	*scp);

		  void handler(int, siginfo_t *info, ucontext_t	*uap);

     The handler function should match the SA_SIGINFO prototype	if the
     SA_SIGINFO	bit is set in sa_flags.	 It then should	be pointed to by the
     sa_sigaction member of struct sigaction.  Note that you should not	assign
     SIG_DFL or	SIG_IGN	this way.

     If	the SA_SIGINFO flag is not set,	the handler function should match ei-
     ther the ANSI C or	traditional BSD	prototype and be pointed to by the
     sa_handler	member of struct sigaction.  In	practice, FreeBSD always sends
     the three arguments of the	latter and since the ANSI C prototype is a
     subset, both will work.  The sa_handler member declaration	in FreeBSD in-
     clude files is that of ANSI C (as required	by POSIX), so a	function
     pointer of	a BSD-style function needs to be casted	to compile without
     warning.  The traditional BSD style is not	portable and since its capa-
     bilities are a full subset	of a SA_SIGINFO	handler, its use is depre-

     The sig argument is the signal number, one	of the SIG... values from

     The code argument of the BSD-style	handler	and the	si_code	member of the
     info argument to a	SA_SIGINFO handler contain a numeric code explaining
     the cause of the signal, usually one of the SI_...	values from
     <sys/signal.h> or codes specific to a signal, i.e., one of	the FPE_...
     values for	SIGFPE.

     The scp argument to a BSD-style handler points to an instance of struct

     The uap argument to a POSIX SA_SIGINFO handler points to an instance of

     The sigaction() system call will fail and no new signal handler will be
     installed if one of the following occurs:

     [EINVAL]		The sig	argument is not	a valid	signal number.

     [EINVAL]		An attempt is made to ignore or	supply a handler for

     kill(1), kill(2), ptrace(2), sigaltstack(2), sigpending(2),
     sigprocmask(2), sigsuspend(2), wait(2), fpsetmask(3), setjmp(3),
     siginfo(3), siginterrupt(3), sigsetops(3),	ucontext(3), tty(4)

     The sigaction() system call is expected to	conform	to ISO/IEC 9945-1:1990
     ("POSIX.1").  The SA_ONSTACK and SA_RESTART flags are Berkeley exten-
     sions, as are the signals,	SIGTRAP, SIGEMT, SIGBUS, SIGSYS, SIGURG,
     Those signals are available on most BSD-derived systems.  The SA_NODEFER
     and SA_RESETHAND flags are	intended for backwards compatibility with
     other operating systems.  The SA_NOCLDSTOP, and SA_NOCLDWAIT flags	are
     featuring options commonly	found in other operating systems.  The flags
     are approved by Version 2 of the Single UNIX Specification	("SUSv2"),
     along with	the option to avoid zombie creation by ignoring	SIGCHLD.

BSD			       September 6, 2013			   BSD


Want to link to this manual page? Use this URL:

home | help