FreeBSD Manual Pages
SUDOERS(5) FreeBSD File Formats Manual SUDOERS(5) NAME sudoers -- default sudo security policy plugin DESCRIPTION The sudoers policy plugin determines a user's sudo privileges. It is the default sudo policy plugin. The policy is driven by the /usr/local/etc/sudoers file or, optionally, in LDAP. The policy format is described in detail in the SUDOERS FILE FORMAT section. For informa- tion on storing sudoers policy information in LDAP, see sudoers.ldap(5). Configuring sudo.conf for sudoers sudo consults the sudo.conf(5) file to determine which plugins to load. If no sudo.conf(5) file is present, or if it contains no Plugin lines, sudoers will be used for auditing, policy decisions and I/O logging. To explicitly configure sudo.conf(5) to use the sudoers plugin, the follow- ing configuration can be used. Plugin sudoers_audit sudoers.so Plugin sudoers_policy sudoers.so Plugin sudoers_io sudoers.so Starting with sudo 1.8.5, it is possible to specify optional arguments to the sudoers plugin in the sudo.conf(5) file. Plugin arguments, if any, should be listed after the path to the plugin (i.e., after sudoers.so). The arguments are only effective for the plugin that opens (and parses) the sudoers file. For sudo version 1.9.1 and higher, this is the sudoers_audit plugin. For older versions, it is the sudoers_policy plugin. Multiple arguments may be specified, separated by white space. For example: Plugin sudoers_audit sudoers.so sudoers_mode=0400 error_recovery=false The following plugin arguments are supported: error_recovery=bool The error_recovery argument can be used to control whether sudoers should attempt to recover from syntax errors in the sudoers file. If set to true (the default), sudoers will try to recover from a syntax error by discarding the portion of the line that contains the error until the end of the line. A value of false will disable error recovery. Prior to version 1.9.3, no error recovery was performed. ldap_conf=pathname The ldap_conf argument can be used to override the default path to the ldap.conf file. ldap_secret=pathname The ldap_secret argument can be used to override the default path to the ldap.secret file. sudoers_file=pathname The sudoers_file argument can be used to override the default path to the sudoers file. sudoers_uid=user-ID The sudoers_uid argument can be used to override the default owner of the sudoers file. It should be specified as a numeric user-ID. sudoers_gid=group-ID The sudoers_gid argument can be used to override the default group of the sudoers file. It must be specified as a numeric group-ID (not a group name). sudoers_mode=mode The sudoers_mode argument can be used to override the default file mode for the sudoers file. It should be specified as an octal value. For more information on configuring sudo.conf(5), refer to its manual. User Authentication The sudoers security policy requires that most users authenticate them- selves before they can use sudo. A password is not required if the in- voking user is root, if the target user is the same as the invoking user, or if the policy has disabled authentication for the user or command. Unlike su(1), when sudoers requires authentication, it validates the in- voking user's credentials, not the target user's (or root's) credentials. This can be changed via the rootpw, targetpw and runaspw flags, described later. If a user who is not listed in the policy tries to run a command via sudo, mail is sent to the proper authorities. The address used for such mail is configurable via the mailto Defaults entry (described later) and defaults to root. No mail will be sent if an unauthorized user tries to run sudo with the -l or -v option unless there is an authentication error and either the mail_always or mail_badpass flags are enabled. This allows users to de- termine for themselves whether or not they are allowed to use sudo. By default, all attempts to run sudo (successful or not) are logged, regard- less of whether or not mail is sent. If sudo is run by root and the SUDO_USER environment variable is set, the sudoers policy will use this value to determine who the actual user is. This can be used by a user to log commands through sudo even when a root shell has been invoked. It also allows the -e option to remain useful even when invoked via a sudo-run script or program. Note, however, that the sudoers file lookup is still done for root, not the user specified by SUDO_USER. sudoers uses per-user time stamp files for credential caching. Once a user has been authenticated, a record is written containing the user-ID that was used to authenticate, the terminal session ID, the start time of the session leader (or parent process) and a time stamp (using a mono- tonic clock if one is available). The user may then use sudo without a password for a short period of time (5 minutes unless overridden by the timestamp_timeout option). By default, sudoers uses a separate record for each terminal, which means that a user's login sessions are authenti- cated separately. The timestamp_type option can be used to select the type of time stamp record sudoers will use. Logging By default, sudoers logs both successful and unsuccessful attempts (as well as errors). The log_allowed and log_denied flags can be used to control this behavior. Messages can be logged to syslog(3), a log file, or both. The default is to log to syslog(3) but this is configurable via the syslog and logfile settings. See EVENT LOGGING for a description of the log file format. sudoers is also capable of running a command in a pseudo-terminal and logging input and/or output. The standard input, standard output, and standard error can be logged even when not associated with a terminal. For more information about I/O logging, see the I/O LOGGING section. Starting with version 1.9, the log_servers setting may be used to send event and I/O log data to a remote server running sudo_logsrvd or another service that implements the protocol described by sudo_logsrv.proto(5). Command environment Since environment variables can influence program behavior, sudoers pro- vides a means to restrict which variables from the user's environment are inherited by the command to be run. There are two distinct ways sudoers can deal with environment variables. By default, the env_reset flag is enabled. This causes commands to be executed with a new, minimal environment. On AIX (and Linux systems without PAM), the environment is initialized with the contents of the /etc/environment file. On BSD systems, if the use_loginclass flag is en- abled, the environment is initialized based on the path and setenv set- tings in /etc/login.conf. The HOME, MAIL, SHELL, LOGNAME and USER envi- ronment variables are initialized based on the target user and the SUDO_* variables are set based on the invoking user. Additional variables, such as DISPLAY, PATH and TERM, are preserved from the invoking user's envi- ronment if permitted by the env_check, or env_keep options. A few envi- ronment variables are treated specially. If the PATH and TERM variables are not preserved from the user's environment, they will be set to de- fault values. The LOGNAME and USER are handled as a single entity. If one of them is preserved (or removed) from the user's environment, the other will be as well. If LOGNAME and USER are to be preserved but only one of them is present in the user's environment, the other will be set to the same value. This avoids an inconsistent environment where one of the variables describing the user name is set to the invoking user and one is set to the target user. Environment variables with a value begin- ning with `()' are removed unless both the name and value parts are matched by env_keep or env_check, as they may be interpreted as functions by the bash shell. Prior to version 1.8.11, such variables were always removed. If, however, the env_reset flag is disabled, any variables not explicitly denied by the env_check and env_delete options are allowed and their val- ues are inherited from the invoking process. Prior to version 1.8.21, environment variables with a value beginning with `()' were always re- moved. Beginning with version 1.8.21, a pattern in env_delete is used to match bash shell functions instead. Since it is not possible to block all potentially dangerous environment variables, use of the default env_reset behavior is encouraged. Environment variables specified by env_check, env_delete, or env_keep may include one or more `*' characters which will match zero or more charac- ters. No other wildcard characters are supported. By default, environment variables are matched by name. However, if the pattern includes an equal sign (`='), both the variables name and value must match. For example, a bash shell function could be matched as fol- lows: env_keep += "BASH_FUNC_my_func%%=()*" Without the `=()*' suffix, this would not match, as bash shell functions are not preserved by default. The complete list of environment variables that are preserved or removed, as modified by global Defaults parameters in sudoers, is displayed when sudo is run by root with the -V option. The list of environment vari- ables to remove varies based on the operating system sudo is running on. Other sudoers options may influence the command environment, such as always_set_home, secure_path, set_logname, and set_home. On systems that support PAM where the pam_env module is enabled for sudo, variables in the PAM environment may be merged in to the environment. If a variable in the PAM environment is already present in the user's envi- ronment, the value will only be overridden if the variable was not pre- served by sudoers. When env_reset is enabled, variables preserved from the invoking user's environment by the env_keep list take precedence over those in the PAM environment. When env_reset is disabled, variables present the invoking user's environment take precedence over those in the PAM environment unless they match a pattern in the env_delete list. The dynamic linker on most operating systems will remove variables that can control dynamic linking from the environment of set-user-ID executa- bles, including sudo. Depending on the operating system this may include _RLD*, DYLD_*, LD_*, LDR_*, LIBPATH, SHLIB_PATH, and others. These type of variables are removed from the environment before sudo even begins ex- ecution and, as such, it is not possible for sudo to preserve them. As a special case, if the -i option (initial login) is specified, sudoers will initialize the environment regardless of the value of env_reset. The DISPLAY, PATH and TERM variables remain unchanged; HOME, MAIL, SHELL, USER, and LOGNAME are set based on the target user. On AIX (and Linux systems without PAM), the contents of /etc/environment are also included. On BSD systems, if the use_loginclass flag is enabled, the path and setenv variables in /etc/login.conf are also applied. All other environ- ment variables are removed unless permitted by env_keep or env_check, de- scribed above. Finally, the restricted_env_file and env_file files are applied, if present. The variables in restricted_env_file are applied first and are subject to the same restrictions as the invoking user's environment, as detailed above. The variables in env_file are applied last and are not subject to these restrictions. In both cases, variables present in the files will only be set to their specified values if they would not con- flict with an existing environment variable. SUDOERS FILE FORMAT The sudoers file is composed of two types of entries: aliases (basically variables) and user specifications (which specify who may run what). When multiple entries match for a user, they are applied in order. Where there are multiple matches, the last match is used (which is not neces- sarily the most specific match). The sudoers file grammar will be described below in Extended Backus-Naur Form (EBNF). Don't despair if you are unfamiliar with EBNF; it is fairly simple, and the definitions below are annotated. Resource limits By default, sudoers uses the operating system's native method of setting resource limits for the target user. On Linux systems, resource limits are usually set by the pam_limits.so PAM module. On some BSD systems, the /etc/login.conf file specifies resource limits for the user. On AIX systems, resource limits are configured in the /etc/security/limits file. If there is no system mechanism to set per-user resource limits, the com- mand will run with the same limits as the invoking user. The one excep- tion to this is the core dump file size, which is set by sudoers to 0 by default. Disabling core dumps by default makes it possible to avoid po- tential security problems where the core file is treated as trusted in- put. Resource limits may also be set in the sudoers file itself, in which case they override those set by the system. See the rlimit_as, rlimit_core, rlimit_cpu, rlimit_data, rlimit_fsize, rlimit_locks, rlimit_memlock, rlimit_nofile, rlimit_nproc, rlimit_rss, rlimit_stack options described below. Resource limits in sudoers may be specified in one of the follow- ing formats: "value" Both the soft and hard resource limits are set to the same value. The special value "infinity" can be used to indicate that the value is unlimited. "soft,hard" Two comma-separated values. The soft limit is set to the first value and the hard limit is set to the second. Both values must either be enclosed in a set of double quotes, or the comma must be escaped with a backslash (`\'). The special value "infinity" may be used in place of either value. "default" The default resource limit for the user will be used. This may be a user-specific value (see above) or the value of the resource limit when sudo was invoked for systems that don't support per- user limits. "user" The invoking user's resource limits will be preserved when run- ning the command. For example, to restore the historic core dump file size behavior, a line like the following may be used. Defaults rlimit_core=default Resource limits in sudoers are only supported by version 1.8.7 or higher. Quick guide to EBNF EBNF is a concise and exact way of describing the grammar of a language. Each EBNF definition is made up of production rules. For example: symbol ::= definition | alternate1 | alternate2 ... Each production rule references others and thus makes up a grammar for the language. EBNF also contains the following operators, which many readers will recognize from regular expressions. Do not, however, con- fuse them with "wildcard" characters, which have different meanings. ? Means that the preceding symbol (or group of symbols) is optional. That is, it may appear once or not at all. * Means that the preceding symbol (or group of symbols) may appear zero or more times. + Means that the preceding symbol (or group of symbols) may appear one or more times. Parentheses may be used to group symbols together. For clarity, we will use single quotes ('') to designate what is a verbatim character string (as opposed to a symbol name). Aliases There are four kinds of aliases: User_Alias, Runas_Alias, Host_Alias and Cmnd_Alias. Beginning with sudo 1.9.0, Cmd_Alias may be used in place of Cmnd_Alias if desired. Alias ::= 'User_Alias' User_Alias_Spec (':' User_Alias_Spec)* | 'Runas_Alias' Runas_Alias_Spec (':' Runas_Alias_Spec)* | 'Host_Alias' Host_Alias_Spec (':' Host_Alias_Spec)* | 'Cmnd_Alias' Cmnd_Alias_Spec (':' Cmnd_Alias_Spec)* | 'Cmd_Alias' Cmnd_Alias_Spec (':' Cmnd_Alias_Spec)* User_Alias ::= NAME User_Alias_Spec ::= User_Alias '=' User_List Runas_Alias ::= NAME Runas_Alias_Spec ::= Runas_Alias '=' Runas_List Host_Alias ::= NAME Host_Alias_Spec ::= Host_Alias '=' Host_List Cmnd_Alias ::= NAME Cmnd_Alias_Spec ::= Cmnd_Alias '=' Cmnd_List NAME ::= [A-Z]([A-Z][0-9]_)* Each alias definition is of the form Alias_Type NAME = item1, item2, ... where Alias_Type is one of User_Alias, Runas_Alias, Host_Alias, or Cmnd_Alias. A NAME is a string of uppercase letters, numbers, and under- score characters (`_'). A NAME must start with an uppercase letter. It is possible to put several alias definitions of the same type on a single line, joined by a colon (`:'). For example: Alias_Type NAME = item1, item2, item3 : NAME = item4, item5 It is a syntax error to redefine an existing alias. It is possible to use the same name for aliases of different types, but this is not recom- mended. The definitions of what constitutes a valid alias member follow. User_List ::= User | User ',' User_List User ::= '!'* user name | '!'* #user-ID | '!'* %group | '!'* %#group-ID | '!'* +netgroup | '!'* %:nonunix_group | '!'* %:#nonunix_gid | '!'* User_Alias A User_List is made up of one or more user names, user-IDs (prefixed with `#'), system group names and IDs (prefixed with `%' and `%#' respec- tively), netgroups (prefixed with `+'), non-Unix group names and IDs (prefixed with `%:' and `%:#' respectively), and User_Aliases. Each list item may be prefixed with zero or more `!' operators. An odd number of `!' operators negate the value of the item; an even number just cancel each other out. User netgroups are matched using the user and domain members only; the host member is not used when matching. A user name, user-ID, group, group-ID, netgroup, nonunix_group or nonunix_gid may be enclosed in double quotes to avoid the need for escap- ing special characters. Alternately, special characters may be specified in escaped hex mode, e.g., \x20 for space. When using double quotes, any prefix characters must be included inside the quotes. The actual nonunix_group and nonunix_gid syntax depends on the underlying group provider plugin. For instance, the QAS AD plugin supports the fol- lowing formats: o Group in the same domain: "%:Group Name" o Group in any domain: "%:Group Name@FULLY.QUALIFIED.DOMAIN" o Group SID: "%:S-1-2-34-5678901234-5678901234-5678901234-567" See GROUP PROVIDER PLUGINS for more information. Quotes around group names are optional. Unquoted strings must use a backslash (`\') to escape spaces and special characters. See Other special characters and reserved words for a list of characters that need to be escaped. Runas_List ::= Runas_Member | Runas_Member ',' Runas_List Runas_Member ::= '!'* user name | '!'* #user-ID | '!'* %group | '!'* %#group-ID | '!'* %:nonunix_group | '!'* %:#nonunix_gid | '!'* +netgroup | '!'* Runas_Alias | '!'* ALL A Runas_List is similar to a User_List except that instead of User_Aliases it can contain Runas_Aliases. User names and groups are matched as strings. In other words, two users (groups) with the same user (group) ID are considered to be distinct. If you wish to match all user names with the same user-ID (e.g., root and toor), you can use a user-ID instead of a name (#0 in the example given). The user-ID or group-ID specified in a Runas_Member need not be listed in the password or group database. Host_List ::= Host | Host ',' Host_List Host ::= '!'* host name | '!'* ip_addr | '!'* network(/netmask)? | '!'* +netgroup | '!'* Host_Alias | '!'* ALL A Host_List is made up of one or more host names, IP addresses, network numbers, netgroups (prefixed with `+'), and other aliases. Again, the value of an item may be negated with the `!' operator. Host netgroups are matched using the host (both qualified and unqualified) and domain members only; the user member is not used when matching. If you specify a network number without a netmask, sudo will query each of the local host's network interfaces and, if the network number corresponds to one of the hosts's network interfaces, will use the netmask of that inter- face. The netmask may be specified either in standard IP address nota- tion (e.g., 255.255.255.0 or ffff:ffff:ffff:ffff::), or CIDR notation (number of bits, e.g., 24 or 64). A host name may include shell-style wildcards (see the Wildcards section below), but unless the hostname com- mand on your machine returns the fully qualified host name, you'll need to use the fqdn flag for wildcards to be useful. sudo only inspects ac- tual network interfaces; this means that IP address 127.0.0.1 (localhost) will never match. Also, the host name "localhost" will only match if that is the actual host name, which is usually only the case for non-net- worked systems. digest ::= [A-Fa-f0-9]+ | [A-Za-z0-9\+/=]+ Digest_Spec ::= "sha224" ':' digest | "sha256" ':' digest | "sha384" ':' digest | "sha512" ':' digest Digest_List ::= Digest_Spec | Digest_Spec ',' Digest_List Cmnd_List ::= Cmnd | Cmnd ',' Cmnd_List command name ::= regex | file name command ::= command name | command name args | command name regex | command name '""' | ALL Edit_Spec ::= "sudoedit" file name+ | "sudoedit" regex | "sudoedit" Cmnd ::= Digest_List? '!'* command | '!'* directory | '!'* Edit_Spec | '!'* Cmnd_Alias A Cmnd_List is a list of one or more commands, directories, or aliases. A command is a fully qualified file name, which may include shell-style wildcards (see the Wildcards section below), or a regular expression that starts with `^' and ends with `$' (see the Regular expressions section below). A directory is a fully qualified path name ending in a `/'. When you specify a directory in a Cmnd_List, the user will be able to run any file within that directory (but not in any sub-directories therein). If no command line arguments are specified, the user may run the command with any arguments they choose. Command line arguments can include wild- cards or be a regular expression that starts with `^' and ends with `$'. If the command line arguments consist of `""', the command may only be run with no arguments. If a Cmnd has associated command line arguments, the arguments in the Cmnd must match those given by the user on the command line. If the ar- guments in a Cmnd begin with the `^' character, they will be interpreted as a regular expression and matched accordingly. Otherwise, shell-style wildcards are used when matching. Unless a regular expression is speci- fied, the following characters must be escaped with a `\' if they are used in command arguments: `,', `:', `=', `\'. To prevent arguments in a Cmnd that begin with a `^' character from being interpreted as a regular expression, the `^' must be escaped with a `\'. The built-in command "sudoedit" is used to permit a user to run sudo with the -e option (or as sudoedit). It may take command line arguments just as a normal command does. Unlike other commands, "sudoedit" is built into sudo itself and must be specified in the sudoers file without a leading path. If a leading path is present, for example /usr/bin/sudoedit, the path name will be silently converted to "sudoedit". A fully-qualified path for sudoedit is treated as an error by visudo. A command may be preceded by a Digest_List, a comma-separated list of one or more Digest_Spec entries. If a Digest_List is present, the command will only match successfully if it can be verified using one of the SHA-2 digests in the list. Starting with version 1.9.0, the ALL reserved word can be used in conjunction with a Digest_List. The following digest for- mats are supported: sha224, sha256, sha384, and sha512. The string may be specified in either hex or base64 format (base64 is more compact). There are several utilities capable of generating SHA-2 digests in hex format such as openssl, shasum, sha224sum, sha256sum, sha384sum, sha512sum. For example, using openssl: $ openssl dgst -sha224 /bin/ls SHA224(/bin/ls)= 118187da8364d490b4a7debbf483004e8f3e053ec954309de2c41a25 It is also possible to use openssl to generate base64 output: $ openssl dgst -binary -sha224 /bin/ls | openssl base64 EYGH2oNk1JC0p9679IMATo8+BT7JVDCd4sQaJQ== Warning, if the user has write access to the command itself (directly or via a sudo command), it may be possible for the user to replace the com- mand after the digest check has been performed but before the command is executed. A similar race condition exists on systems that lack the fexecve(2) system call when the directory in which the command is located is writable by the user. See the description of the fdexec setting for more information on how sudo executes commands that have an associated digest. Command digests are only supported by version 1.8.7 or higher. Defaults Certain configuration options may be changed from their default values at run-time via one or more Default_Entry lines. These may affect all users on any host, all users on a specific host, a specific user, a specific command, or commands being run as a specific user. Per-command entries may not include command line arguments. If you need to specify argu- ments, define a Cmnd_Alias and reference that instead. Default_Type ::= 'Defaults' | 'Defaults' '@' Host_List | 'Defaults' ':' User_List | 'Defaults' '!' Cmnd_List | 'Defaults' '>' Runas_List Default_Entry ::= Default_Type Parameter_List Parameter_List ::= Parameter | Parameter ',' Parameter_List Parameter ::= Parameter '=' Value | Parameter '+=' Value | Parameter '-=' Value | '!'* Parameter Parameters may be flags, integer values, strings, or lists. Flags are implicitly boolean and can be turned off via the `!' operator. Some in- teger, string and list parameters may also be used in a boolean context to disable them. Values may be enclosed in double quotes ("") when they contain multiple words. Special characters may be escaped with a back- slash (`\'). To include a literal backslash character in a command line argument you must escape the backslash twice. For example, to match `\n' as part of a command line argument, you must use `\\\\n' in the sudoers file. This is due to there being two levels of escaping, one in the sudoers parser it- self and another when command line arguments are matched by the fnmatch(3) or regexec(3) function. Lists have two additional assignment operators, `+=' and `-='. These op- erators are used to add to and delete from a list respectively. It is not an error to use the `-=' operator to remove an element that does not exist in a list. Defaults entries are parsed in the following order: global, host, user, and runas Defaults first, then command defaults. If there are multiple Defaults settings of the same type, the last matching setting is used. The following Defaults settings are parsed before all others since they may affect subsequent entries: fqdn, group_plugin, runas_default, sudoers_locale. See SUDOERS OPTIONS for a list of supported Defaults parameters. User specification User_Spec ::= User_List Host_List '=' Cmnd_Spec_List \ (':' Host_List '=' Cmnd_Spec_List)* Cmnd_Spec_List ::= Cmnd_Spec | Cmnd_Spec ',' Cmnd_Spec_List Cmnd_Spec ::= Runas_Spec? Option_Spec* (Tag_Spec ':')* Cmnd Runas_Spec ::= '(' Runas_List? (':' Runas_List)? ')' Option_Spec ::= (Date_Spec | Timeout_Spec | Chdir_Spec | Chroot_Spec) Date_Spec ::= ('NOTBEFORE=timestamp' | 'NOTAFTER=timestamp') Timeout_Spec ::= 'TIMEOUT=timeout' Chdir_Spec ::= 'CWD=directory' Chroot_Spec ::= 'CHROOT=directory' Tag_Spec ::= ('EXEC' | 'NOEXEC' | 'FOLLOW' | 'NOFOLLOW' | 'LOG_INPUT' | 'NOLOG_INPUT' | 'LOG_OUTPUT' | 'NOLOG_OUTPUT' | 'MAIL' | 'NOMAIL' | 'INTERCEPT' | 'NOINTERCEPT' | 'PASSWD' | 'NOPASSWD' | 'SETENV' | 'NOSETENV') A user specification determines which commands a user may run (and as what user) on specified hosts. By default, commands are run as root (un- less runas_default has been set to a different value) but this can also be changed on a per-command basis. The basic structure of a user specification is "who where = (as_whom) what". Let's break that down into its constituent parts: Runas_Spec A Runas_Spec determines the user and/or the group that a command may be run as. A fully-specified Runas_Spec consists of two Runas_Lists (as de- fined above) separated by a colon (`:') and enclosed in a set of paren- theses. The first Runas_List indicates which users the command may be run as via the -u option. The second defines a list of groups that may be specified via the -g option (in addition to any of the target user's groups). If both Runas_Lists are specified, the command may be run with any combination of users and groups listed in their respective Runas_Lists. If only the first is specified, the command may be run as any user in the list and, optionally, with any group the target user be- longs to. If the first Runas_List is empty but the second is specified, the command may be run as the invoking user with the group set to any listed in the Runas_List. If both Runas_Lists are empty, the command may only be run as the invoking user and the group, if specified, must be one that the invoking user is a member of. If no Runas_Spec is specified, the command may only be run as the runas_default user (root by default) and the group, if specified, must be one that the runas_default user is a member of. A Runas_Spec sets the default for the commands that follow it. What this means is that for the entry: dgb boulder = (operator) /bin/ls, /bin/kill, /usr/bin/lprm The user dgb may run /bin/ls, /bin/kill, and /usr/bin/lprm on the host boulder--but only as operator. For example: $ sudo -u operator /bin/ls It is also possible to override a Runas_Spec later on in an entry. If we modify the entry like so: dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm Then user dgb is now allowed to run /bin/ls as operator, but /bin/kill and /usr/bin/lprm as root. We can extend this to allow dgb to run /bin/ls with either the user or group set to operator: dgb boulder = (operator : operator) /bin/ls, (root) /bin/kill,\ /usr/bin/lprm While the group portion of the Runas_Spec permits the user to run as com- mand with that group, it does not force the user to do so. If no group is specified on the command line, the command will run with the group listed in the target user's password database entry. The following would all be permitted by the sudoers entry above: $ sudo -u operator /bin/ls $ sudo -u operator -g operator /bin/ls $ sudo -g operator /bin/ls In the following example, user tcm may run commands that access a modem device file with the dialer group. tcm boulder = (:dialer) /usr/bin/tip, /usr/bin/cu,\ /usr/local/bin/minicom In this example only the group will be set, the command still runs as user tcm. For example: $ sudo -g dialer /usr/bin/cu Multiple users and groups may be present in a Runas_Spec, in which case the user may select any combination of users and groups via the -u and -g options. In this example: alan ALL = (root, bin : operator, system) ALL user alan may run any command as either user root or bin, optionally set- ting the group to operator or system. Option_Spec A Cmnd may have zero or more options associated with it. Options may consist of start and/or end dates and command timeouts. Once an option is set for a Cmnd, subsequent Cmnds in the Cmnd_Spec_List, inherit that option unless it is overridden by another option. Option names are re- served words in sudoers. This means that none of the valid option names (see below) can be used when declaring an alias. Date_Spec sudoers rules can be specified with a start and end date via the NOTBEFORE and NOTAFTER settings. The time stamp must be specified in "Generalized Time" as defined by RFC 4517. The format is effectively `yyyymmddHHMMSSZ' where the minutes and seconds are optional. The `Z' suffix indicates that the time stamp is in Coordinated Universal Time (UTC). It is also possible to specify a timezone offset from UTC in hours and minutes instead of a `Z'. For example, `-0500' would corre- spond to Eastern Standard time in the US. As an extension, if no `Z' or timezone offset is specified, local time will be used. The following are all valid time stamps: 20170214083000Z 2017021408Z 20160315220000-0500 20151201235900 Timeout_Spec A command may have a timeout associated with it. If the timeout expires before the command has exited, the command will be terminated. The time- out may be specified in combinations of days, hours, minutes, and seconds with a single-letter case-insensitive suffix that indicates the unit of time. For example, a timeout of 7 days, 8 hours, 30 minutes, and 10 sec- onds would be written as `7d8h30m10s'. If a number is specified without a unit, seconds are assumed. Any of the days, minutes, hours, or seconds may be omitted. The order must be from largest to smallest unit and a unit may not be specified more than once. The following are all valid timeout values: `7d8h30m10s', `14d', `8h30m', `600s', `3600'. The following are invalid timeout values: `12m2w1d', `30s10m4h', `1d2d3h'. This setting is only supported by version 1.8.20 or higher. Chdir_Spec The working directory that the command will be run in can be specified using the CWD setting. The directory must be a fully-qualified path name beginning with a `/' or `~' character, or the special value "*". A value of "*" indicates that the user may specify the working directory by run- ning sudo with the -D option. By default, commands are run from the in- voking user's current working directory, unless the -i option is given. Path names of the form ~user/path/name are interpreted as being relative to the named user's home directory. If the user name is omitted, the path will be relative to the runas user's home directory. This setting is only supported by version 1.9.3 or higher. Chroot_Spec The root directory that the command will be run in can be specified using the CHROOT setting. The directory must be a fully-qualified path name beginning with a `/' or `~' character, or the special value "*". A value of "*" indicates that the user may specify the root directory by running sudo with the -R option. This setting can be used to run the command in a chroot(2) "sandbox" similar to the chroot(8) utility. Path names of the form ~user/path/name are interpreted as being relative to the named user's home directory. If the user name is omitted, the path will be relative to the runas user's home directory. This setting is only supported by version 1.9.3 or higher. Tag_Spec A command may have zero or more tags associated with it. The following tag values are supported: EXEC, NOEXEC, FOLLOW, NOFOLLOW, LOG_INPUT, NOLOG_INPUT, LOG_OUTPUT, NOLOG_OUTPUT, MAIL, NOMAIL, INTERCEPT, NOINTERCEPT, PASSWD, NOPASSWD, SETENV, and NOSETENV. Once a tag is set on a Cmnd, subsequent Cmnds in the Cmnd_Spec_List, inherit the tag unless it is overridden by the opposite tag (in other words, PASSWD overrides NOPASSWD and NOEXEC overrides EXEC). EXEC and NOEXEC If sudo has been compiled with noexec support and the underlying oper- ating system supports it, the NOEXEC tag can be used to prevent a dy- namically-linked executable from running further commands itself. In the following example, user aaron may run /usr/bin/more and /usr/bin/vi but shell escapes will be disabled. aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi See the Preventing shell escapes section below for more details on how NOEXEC works and whether or not it will work on your system. FOLLOW and NOFOLLOW Starting with version 1.8.15, sudoedit will not open a file that is a symbolic link unless the sudoedit_follow flag is enabled. The FOLLOW and NOFOLLOW tags override the value of sudoedit_follow and can be used to permit (or deny) the editing of symbolic links on a per-command ba- sis. These tags are only effective for the sudoedit command and are ignored for all other commands. LOG_INPUT and NOLOG_INPUT These tags override the value of the log_input flag on a per-command basis. For more information, see I/O LOGGING. LOG_OUTPUT and NOLOG_OUTPUT These tags override the value of the log_output flag on a per-command basis. For more information, see I/O LOGGING. MAIL and NOMAIL These tags provide fine-grained control over whether mail will be sent when a user runs a command by overriding the value of the mail_all_cmnds flag on a per-command basis. They have no effect when sudo is run with the -l or -v options. A NOMAIL tag will also override the mail_always and mail_no_perms options. For more information, see the descriptions of mail_all_cmnds, mail_always, and mail_no_perms in the SUDOERS OPTIONS section below. PASSWD and NOPASSWD By default, sudo requires that a user authenticate before running a command. This behavior can be modified via the NOPASSWD tag. Like a Runas_Spec, the NOPASSWD tag sets a default for the commands that fol- low it in the Cmnd_Spec_List. Conversely, the PASSWD tag can be used to reverse things. For example: ray rushmore = NOPASSWD: /bin/kill, /bin/ls, /usr/bin/lprm would allow the user ray to run /bin/kill, /bin/ls, and /usr/bin/lprm as root on the machine "rushmore" without authenticating himself. If we only want ray to be able to run /bin/kill without a password the en- try would be: ray rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm Note, however, that the PASSWD tag has no effect on users who are in the group specified by the exempt_group setting. By default, if the NOPASSWD tag is applied to any of a user's entries for the current host, the user will be able to run `sudo -l' without a password. Additionally, a user may only run `sudo -v' without a pass- word if all of the user's entries for the current host have the NOPASSWD tag. This behavior may be overridden via the verifypw and listpw options. SETENV and NOSETENV These tags override the value of the setenv flag on a per-command ba- sis. If SETENV has been set for a command, the user may disable the env_reset flag from the command line via the -E option. Additionally, environment variables set on the command line are not subject to the restrictions imposed by env_check, env_delete, or env_keep. As such, only trusted users should be allowed to set variables in this manner. If the command matched is ALL, the SETENV tag is implied for that com- mand; this default may be overridden by use of the NOSETENV tag. INTERCEPT and NOINTERCEPT If sudo has been compiled with intercept support and the underlying op- erating system supports it, the INTERCEPT tag can be used to cause pro- grams spawned by a command to be validated against sudoers and logged just like they would be if run through sudo directly. This is useful in conjunction with commands that allow shell escapes such as editors, shells, and paginators. There is additional overhead due to the policy check that may add latency when running commands such as shell scripts that execute a large number of sub-commands. For interactive commands, such as a shell or editor, the overhead is not usually noticeable. In the following example, user chuck may run any command on the machine "research" in intercept mode. chuck research = INTERCEPT: ALL See the Preventing shell escapes section below for more details on how INTERCEPT works and whether or not it will work on your system. Wildcards sudo allows shell-style wildcards (aka meta or glob characters) to be used in host names, path names, and command line arguments in the sudoers file. Wildcard matching is done via the glob(3) and fnmatch(3) functions as specified by IEEE Std 1003.1 ("POSIX.1"). * Matches any set of zero or more characters (including white space). ? Matches any single character (including white space). [...] Matches any character in the specified range. [!...] Matches any character not in the specified range. \x For any character `x', evaluates to `x'. This is used to es- cape special characters such as: `*', `?', `[', and `]'. These are not regular expressions. Unlike a regular expression there is no way to match one or more characters within a range. Character classes may be used if your system's glob(3) and fnmatch(3) functions support them. However, because the `:' character has special meaning in sudoers, it must be escaped. For example: /bin/ls [[\:alpha\:]]* Would match any file name beginning with a letter. A forward slash (`/') will not be matched by wildcards used in the file name portion of the command. This is to make a path like: /usr/bin/* match /usr/bin/who but not /usr/bin/X11/xterm. When matching the command line arguments, however, a slash does get matched by wildcards since command line arguments may contain arbitrary strings and not just path names. Wildcards in command line arguments should be used with care. Wildcards can match any character, including white space. In most cases, it is safer to use a regular expression to match command line arguments. For more information, see Wildcards in command arguments below. Exceptions to wildcard rules The following exceptions apply to the above rules: "" If the empty string `""' is the only command line argument in the sudoers file entry it means that command is not allowed to be run with any arguments. sudoedit Command line arguments to the sudoedit built-in command should always be path names, so a forward slash (`/') will not be matched by a wildcard. Regular expressions Starting with version 1.9.10, it is possible to use regular expressions for path names and command line arguments. Regular expressions are more expressive than shell-style wildcards and are usually safer because they provide a greater degree of control when matching. The type of regular expressions supported by sudoers are POSIX extended regular expressions, similar to those used by the egrep(1) utility. They are usually docu- mented in the regex(7) or re_format(7) manual, depending on the system. As an extension, if the regular expression begins with "(?i)", it will be matched in a case-insensitive manner. In sudoers, regular expressions must start with a `^' character and end with a `$'. This makes it explicit what is, or is not, a regular expres- sion. Either the path name, the command line arguments or both may be regular expressions. Because the path name and arguments are matched separately, it is even possible to use wildcards for the path name and regular expressions for the arguments. It is not possible to use a sin- gle regular expression to match both the command and its arguments. Reg- ular expressions in sudoers are limited to 1024 characters. There is no need to escape sudoers special characters in a regular ex- pression other than the pound sign (`#'). In the following example, user john can run the passwd(1) command as root on any host but is not allowed to change root's password. This kind of rule is impossible to express safely using wildcards. john ALL = /usr/bin/passwd ^[a-zA-Z0-9_]+$,\ !/usr/bin/passwd root It is also possible to use a regular expression in conjunction with sudoedit rules. The following rule would give user bob the ability to edit the /etc/motd, /etc/issue, and /etc/hosts files only. bob ALL = sudoedit ^/etc/(motd|issue|hosts)$ Regular expressions may also be used to match the command itself. In this example, a regular expression is used to allow user sid to run the /usr/sbin/groupadd, /usr/sbin/groupmod, /usr/sbin/groupdel, /usr/sbin/useradd, /usr/sbin/usermod, and /usr/sbin/userdel commands as root. sid ALL = ^/usr/sbin/(group|user)(add|mod|del)$ One disadvantage of using a regular expression to match the command name is that it is not possible to match relative paths such as ./useradd or ../sbin/useradd. This has security implications when a regular expres- sion is used for the command name in conjunction with the negation opera- tor, `!', as such rules can be trivially bypassed. Because of this, us- ing a negated regular expression for the command name is strongly discouraged. This does not apply to negated commands that only use a regular expression to match the command arguments. See Regular expressions in command names below for more information. Including other files from within sudoers It is possible to include other sudoers files from within the sudoers file currently being parsed using the @include and @includedir direc- tives. For compatibility with sudo versions prior to 1.9.1, #include and #includedir are also accepted. An include file can be used, for example, to keep a site-wide sudoers file in addition to a local, per-machine file. For the sake of this ex- ample the site-wide sudoers file will be /etc/sudoers and the per-machine one will be /etc/sudoers.local. To include /etc/sudoers.local from within /etc/sudoers one would use the following line in /etc/sudoers: @include /etc/sudoers.local When sudo reaches this line it will suspend processing of the current file (/etc/sudoers) and switch to /etc/sudoers.local. Upon reaching the end of /etc/sudoers.local, the rest of /etc/sudoers will be processed. Files that are included may themselves include other files. A hard limit of 128 nested include files is enforced to prevent include file loops. Starting with version 1.9.1, the path to the include file may contain white space if it is escaped with a backslash (`\'). Alternately, the entire path may be enclosed in double quotes (""), in which case no es- caping is necessary. To include a literal backslash in the path, `\\' should be used. If the path to the include file is not fully-qualified (does not begin with a `/'), it must be located in the same directory as the sudoers file it was included from. For example, if /etc/sudoers contains the line: @include sudoers.local the file that will be included is /etc/sudoers.local. The file name may also include the `%h' escape, signifying the short form of the host name. In other words, if the machine's host name is "xerxes", then @include /etc/sudoers.%h will cause sudo to include the file /etc/sudoers.xerxes. The @includedir directive can be used to create a sudoers.d directory that the system package manager can drop sudoers file rules into as part of package installation. For example, given: @includedir /etc/sudoers.d sudo will suspend processing of the current file and read each file in /etc/sudoers.d, skipping file names that end in `~' or contain a `.' character to avoid causing problems with package manager or editor tempo- rary/backup files. Files are parsed in sorted lexical order. That is, /etc/sudoers.d/01_first will be parsed before /etc/sudoers.d/10_second. Be aware that because the sorting is lexical, not numeric, /etc/sudoers.d/1_whoops would be loaded after /etc/sudoers.d/10_second. Using a consistent number of leading zeroes in the file names can be used to avoid such problems. After parsing the files in the directory, con- trol returns to the file that contained the @includedir directive. Unlike files included via @include, visudo will not edit the files in a @includedir directory unless one of them contains a syntax error. It is still possible to run visudo with the -f flag to edit the files directly, but this will not catch the redefinition of an alias that is also present in a different file. Other special characters and reserved words The pound sign (`#') is used to indicate a comment (unless it is part of a #include directive or unless it occurs in the context of a user name and is followed by one or more digits, in which case it is treated as a user-ID). Both the comment character and any text after it, up to the end of the line, are ignored. The reserved word ALL is a built-in alias that always causes a match to succeed. It can be used wherever one might otherwise use a Cmnd_Alias, User_Alias, Runas_Alias, or Host_Alias. Attempting to define an alias named ALL will result in a syntax error. Using ALL can be dangerous since in a command context, it allows the user to run any command on the system. The following option names permitted in an Option_Spec are also consid- ered reserved words: CHROOT, TIMEOUT, CWD, NOTBEFORE and NOTAFTER. At- tempting to define an alias with the same name as one of the options will result in a syntax error. An exclamation point (`!') can be used as a logical not operator in a list or alias as well as in front of a Cmnd. This allows one to exclude certain values. For the `!' operator to be effective, there must be something for it to exclude. For example, to match all users except for root one would use: ALL, !root If the ALL, is omitted, as in: !root it would explicitly deny root but not match any other users. This is different from a true "negation" operator. Note, however, that using a `!' in conjunction with the built-in ALL alias to allow a user to run "all but a few" commands rarely works as in- tended (see SECURITY NOTES below). Long lines can be continued with a backslash (`\') as the last character on the line. White space between elements in a list as well as special syntactic char- acters in a User Specification (`=', `:', `(', `)') is optional. The following characters must be escaped with a backslash (`\') when used as part of a word (e.g., a user name or host name): `!', `=', `:', `,', `(', `)', `\'. SUDOERS OPTIONS sudo's behavior can be modified by Default_Entry lines, as explained ear- lier. A list of all supported Defaults parameters, grouped by type, are listed below. Boolean Flags: always_query_group_plugin If a group_plugin is configured, use it to resolve groups of the form `%group' as long as there is not also a system group of the same name. Normally, only groups of the form `%:group' are passed to the group_plugin. This flag is off by default. always_set_home If enabled, sudo will set the HOME environment variable to the home directory of the target user (which is the runas_default user unless the -u option is used). This flag is largely obsolete and has no effect unless the env_reset flag has been disabled or HOME is present in the env_keep list, both of which are strongly discour- aged. This flag is off by default. authenticate If set, users must authenticate themselves via a pass- word (or other means of authentication) before they may run commands. This default may be overridden via the PASSWD and NOPASSWD tags. This flag is on by default. case_insensitive_group If enabled, group names in sudoers will be matched in a case insensitive manner. This may be necessary when users are stored in LDAP or AD. This flag is on by de- fault. case_insensitive_user If enabled, user names in sudoers will be matched in a case insensitive manner. This may be necessary when groups are stored in LDAP or AD. This flag is on by default. closefrom_override If set, the user may use the -C option which overrides the default starting point at which sudo begins closing open file descriptors. This flag is off by default. compress_io If set, and sudo is configured to log a command's input or output, the I/O logs will be compressed using zlib. This flag is on by default when sudo is compiled with zlib support. exec_background By default, sudo runs a command as the foreground process as long as sudo itself is running in the fore- ground. When the exec_background flag is enabled and the command is being run in a pseudo-terminal (due to I/O logging or the use_pty flag), the command will be run as a background process. Attempts to read from the controlling terminal (or to change terminal settings) will result in the command being suspended with the SIGTTIN signal (or SIGTTOU in the case of terminal set- tings). If this happens when sudo is a foreground process, the command will be granted the controlling terminal and resumed in the foreground with no user in- tervention required. The advantage of initially run- ning the command in the background is that sudo need not read from the terminal unless the command explic- itly requests it. Otherwise, any terminal input must be passed to the command, whether it has required it or not (the kernel buffers terminals so it is not possible to tell whether the command really wants the input). This is different from historic sudo behavior or when the command is not being run in a pseudo-terminal. For this to work seamlessly, the operating system must support the automatic restarting of system calls. Un- fortunately, not all operating systems do this by de- fault, and even those that do may have bugs. For exam- ple, macOS fails to restart the tcgetattr(3) and tcsetattr(3) functions (this is a bug in macOS). Fur- thermore, because this behavior depends on the command stopping with the SIGTTIN or SIGTTOU signals, programs that catch these signals and suspend themselves with a different signal (usually SIGTOP) will not be automati- cally foregrounded. Some versions of the linux su(1) command behave this way. This flag is off by default. This setting is only supported by version 1.8.7 or higher. It has no effect unless I/O logging is enabled or the use_pty flag is enabled. env_editor If set, visudo will use the value of the SUDO_EDITOR, VISUAL or EDITOR environment variables before falling back on the default editor list. visudo is typically run as root so this flag may allow a user with visudo privileges to run arbitrary commands as root without logging. An alternative is to place a colon-separated list of "safe" editors int the editor setting. visudo will then only use SUDO_EDITOR, VISUAL or EDITOR if they match a value specified in editor. If the env_reset flag is enabled, the SUDO_EDITOR, VISUAL and/or EDITOR environment variables must be present in the env_keep list for the env_editor flag to function when visudo is invoked via sudo. This flag is on by default. env_reset If set, sudo will run the command in a minimal environ- ment containing the TERM, PATH, HOME, MAIL, SHELL, LOGNAME, USER and SUDO_* variables. Any variables in the caller's environment or in the file specified by the restricted_env_file setting that match the env_keep and env_check lists are then added, followed by any variables present in the file specified by the env_file setting (if any). The contents of the env_keep and env_check lists, as modified by global Defaults parame- ters in sudoers, are displayed when sudo is run by root with the -V option. If the secure_path setting is en- abled, its value will be used for the PATH environment variable. This flag is on by default. fast_glob Normally, sudo uses the glob(3) function to do shell- style globbing when matching path names. However, since it accesses the file system, glob(3) can take a long time to complete for some patterns, especially when the pattern references a network file system that is mounted on demand (auto mounted). The fast_glob flag causes sudo to use the fnmatch(3) function, which does not access the file system to do its matching. The disadvantage of fast_glob is that it is unable to match relative paths such as ./ls or ../bin/ls. This has security implications when path names that include globbing characters are used with the negation opera- tor, `!', as such rules can be trivially bypassed. As such, this flag should not be used when the sudoers file contains rules that contain negated path names which include globbing characters. This flag is off by default. log_passwords Most programs that require a user's password will dis- able echo before reading the password to avoid display- ing the plaintext password on the screen. However, if terminal input is being logged (see I/O LOGGING), the password will still be present in the I/O log. If the log_passwords option is disabled, sudoers will attempt to prevent passwords from being logged. It does this by using the regular expressions in passprompt_regex to match a password prompt in the terminal output buffer. When a match is found, input characters in the I/O log will be replaced with `*' until either a line feed or carriage return is found in the terminal input or a new terminal output buffer is received. If, however, a program displays characters as the user types (such as sudo when pwfeedback is set), only the first character of the password will be replaced in the I/O log. This option has no effect unless log_input or log_ttyin are also set. This flag is on by default. This setting is only supported by version 1.9.10 or higher. fqdn Set this flag if you want to put fully qualified host names in the sudoers file when the local host name (as returned by the `hostname' command) does not contain the domain name. In other words, instead of myhost you would use myhost.mydomain.edu. You may still use the short form if you wish (and even mix the two). This flag is only effective when the "canonical" host name, as returned by the getaddrinfo(3) or gethostbyname(3) function, is a fully-qualified domain name. This is usually the case when the system is configured to use DNS for host name resolution. If the system is configured to use the /etc/hosts file in preference to DNS, the "canonical" host name may not be fully-qualified. The order that sources are queried for host name resolution is usually specified in the /etc/nsswitch.conf, /etc/netsvc.conf, /etc/host.conf, or, in some cases, /etc/resolv.conf file. In the /etc/hosts file, the first host name of the entry is considered to be the "canonical" name; subsequent names are aliases that are not used by sudoers. For example, the following hosts file line for the machine "xyzzy" has the fully-qualified domain name as the "canonical" host name, and the short version as an alias. 192.168.1.1 xyzzy.sudo.ws xyzzy If the machine's hosts file entry is not formatted properly, the fqdn flag will not be effective if it is queried before DNS. Beware that when using DNS for host name resolution, turning on fqdn requires sudoers to make DNS lookups which renders sudo unusable if DNS stops working (for example if the machine is disconnected from the net- work). Just like with the hosts file, you must use the "canonical" name as DNS knows it. That is, you may not use a host alias (CNAME entry) due to performance is- sues and the fact that there is no way to get all aliases from DNS. This flag is off by default. ignore_audit_errors Allow commands to be run even if sudoers cannot write to the audit log. If enabled, an audit log write fail- ure is not treated as a fatal error. If disabled, a command may only be run after the audit event is suc- cessfully written. This flag is only effective on sys- tems for which sudoers supports audit logging, includ- ing FreeBSD, Linux, macOS, and Solaris. This flag is on by default. ignore_dot If set, sudo will ignore "." or "" (both denoting the current directory) in the PATH environment variable; the PATH itself is not modified. This flag is on by default. ignore_iolog_errors Allow commands to be run even if sudoers cannot write to the I/O log (local or remote). If enabled, an I/O log write failure is not treated as a fatal error. If disabled, the command will be terminated if the I/O log cannot be written to. This flag is off by default. ignore_logfile_errors Allow commands to be run even if sudoers cannot write to the log file. If enabled, a log file write failure is not treated as a fatal error. If disabled, a com- mand may only be run after the log file entry is suc- cessfully written. This flag only has an effect when sudoers is configured to use file-based logging via the logfile setting. This flag is on by default. ignore_local_sudoers If set via LDAP, parsing of /usr/local/etc/sudoers will be skipped. This is intended for sites that wish to prevent the usage of local sudoers files so that only LDAP is used. This thwarts the efforts of rogue opera- tors who would attempt to add roles to /usr/local/etc/sudoers. When this flag is enabled, /usr/local/etc/sudoers does not even need to exist. Since this flag tells sudo how to behave when no spe- cific LDAP entries have been matched, this sudoOption is only meaningful for the `cn=defaults' section. This flag is off by default. ignore_unknown_defaults If set, sudo will not produce a warning if it encoun- ters an unknown Defaults entry in the sudoers file or an unknown sudoOption in LDAP. This flag is off by de- fault. insults If set, sudo will insult users when they enter an in- correct password. This flag is off by default. log_allowed If set, sudoers will log commands allowed by the policy to the system audit log (where supported) as well as to syslog and/or a log file. This flag is on by default. This setting is only supported by version 1.8.29 or higher. log_denied If set, sudoers will log commands denied by the policy to the system audit log (where supported) as well as to syslog and/or a log file. This flag is on by default. This setting is only supported by version 1.8.29 or higher. log_exit_status If set, sudoers will log the exit value of commands that are run to syslog and/or a log file. If a command was terminated by a signal, the signal name is logged as well. This flag is off by default. This setting is only supported by version 1.9.8 or higher. log_host If set, the host name will be included in log entries written to the file configured by the logfile setting. This flag is off by default. log_input If set, sudo will run the command in a pseudo-terminal (if sudo was run from a terminal) and log all user in- put. If the standard input is not connected to the user's terminal, due to I/O redirection or because the command is part of a pipeline, that input is also logged. For more information about I/O logging, see the I/O LOGGING section. This flag is off by default. log_output If set, sudo will run the command in a pseudo-terminal (if sudo was run from a terminal) and log all output that is sent to the user's terminal, the standard out- put or the standard error. If the standard output or standard error is not connected to the user's terminal, due to I/O redirection or because the command is part of a pipeline, that output is also logged. For more information about I/O logging, see the I/O LOGGING sec- tion. This flag is off by default. log_server_keepalive If set, sudo will enable the TCP keepalive socket op- tion on the connection to the log server. This enables the periodic transmission of keepalive messages to the server. If the server does not respond to a message, the connection will be closed and the running command will be terminated unless the ignore_iolog_errors flag (I/O logging enabled) or the ignore_log_errors flag (I/O logging disabled) is set. This flag is on by de- fault. This setting is only supported by version 1.9.0 or higher. log_server_verify If set, the server certificate received during the TLS handshake must be valid and it must contain either the server name (from log_servers) or its IP address. If either of these conditions is not met, the TLS hand- shake will fail. This flag is on by default. This setting is only supported by version 1.9.0 or higher. log_stderr If set, sudo will log the standard error if it is not connected to the user's terminal. This can be used to log output to a pipe or redirected to a file. This flag is off by default but is enabled when either the log_output flag or the LOG_OUTPUT command tag is set. log_stdin If set, sudo will log the standard input if it is not connected to the user's terminal. This can be used to log input from a pipe or redirected from a file. This flag is off by default but is enabled when either the log_input flag or the LOG_INPUT command tag is set. log_stdout If set, sudo will log the standard output if it is not connected to the user's terminal. This can be used to log output to a pipe or redirected to a file. This flag is off by default but is enabled when either the log_output flag or the LOG_OUTPUT command tag is set. log_subcmds If set, sudoers will log when a command spawns a child process and executes a program using the execve(2), execl(3), execle(3), execlp(3), execv(3), execvp(3), execvpe(3), or system(3) library functions. For exam- ple, if a shell is run by sudo, the individual commands run via the shell will be logged. This flag is off by default. The log_subcmds flag uses the same underlying mechanism as the intercept setting. See Preventing shell escapes for more information on what systems support this op- tion and its limitations. This setting is only sup- ported by version 1.9.8 or higher and is incompatible with SELinux RBAC support unless the system supports seccomp(2) filter mode. log_ttyin If set, sudo will run the command in a pseudo-terminal and log user keystrokes sent to the user's terminal, if one is present. This flag is off by default but is en- abled when either the log_input flag or the LOG_INPUT command tag is set. If no terminal is present, for ex- ample when running a remote command using ssh(1), this flag will have no effect. log_ttyout If set, sudo will run the command in a pseudo-terminal and log all output displayed on the user's terminal, if one is present. This flag is off by default but is en- abled when either the log_output flag or the LOG_OUTPUT command tag is set. If no terminal is present, for ex- ample when running a remote command using ssh(1), this flag will have no effect. log_year If set, the four-digit year will be logged in the (non- syslog) sudo log file. This flag is off by default. long_otp_prompt When validating with a One Time Password (OTP) scheme such as S/Key or OPIE, a two-line prompt is used to make it easier to cut and paste the challenge to a lo- cal window. It's not as pretty as the default but some people find it more convenient. This flag is on by de- fault. mail_all_cmnds Send mail to the mailto user every time a user attempts to run a command via sudo (this includes sudoedit). No mail will be sent if the user runs sudo with the -l or -v option unless there is an authentication error and the mail_badpass flag is also set. This flag is off by default. mail_always Send mail to the mailto user every time a user runs sudo. This flag is off by default. mail_badpass Send mail to the mailto user if the user running sudo does not enter the correct password. If the command the user is attempting to run is not permitted by sudoers and one of the mail_all_cmnds, mail_always, mail_no_host, mail_no_perms or mail_no_user flags are set, this flag will have no effect. This flag is off by default. mail_no_host If set, mail will be sent to the mailto user if the in- voking user exists in the sudoers file, but is not al- lowed to run commands on the current host. This flag is off by default. mail_no_perms If set, mail will be sent to the mailto user if the in- voking user is allowed to use sudo but the command they are trying is not listed in their sudoers file entry or is explicitly denied. This flag is off by default. mail_no_user If set, mail will be sent to the mailto user if the in- voking user is not in the sudoers file. This flag is on by default. match_group_by_gid By default, sudoers will look up each group the user is a member of by group-ID to determine the group name (this is only done once). The resulting list of the user's group names is used when matching groups listed in the sudoers file. This works well on systems where the number of groups listed in the sudoers file is larger than the number of groups a typical user belongs to. On systems where group lookups are slow, where users may belong to a large number of groups, or where the number of groups listed in the sudoers file is rel- atively small, it may be prohibitively expensive and running commands via sudo may take longer than normal. On such systems it may be faster to use the match_group_by_gid flag to avoid resolving the user's group-IDs to group names. In this case, sudoers must look up any group name listed in the sudoers file and use the group-ID instead of the group name when deter- mining whether the user is a member of the group. If match_group_by_gid is enabled, group database lookups performed by sudoers will be keyed by group name as opposed to group-ID. On systems where there are multiple sources for the group database, it is pos- sible to have conflicting group names or group-IDs in the local /etc/group file and the remote group data- base. On such systems, enabling or disabling match_group_by_gid can be used to choose whether group database queries are performed by name (enabled) or ID (disabled), which may aid in working around group entry conflicts. The match_group_by_gid flag has no effect when sudoers data is stored in LDAP. This flag is off by default. This setting is only supported by version 1.8.18 or higher. intercept If set, all commands run via sudo will behave as if the INTERCEPT tag has been set, unless overridden by an NOINTERCEPT tag. See the description of INTERCEPT and NOINTERCEPT above as well as the Preventing shell escapes section at the end of this manual. This flag is off by default. This setting is only supported by version 1.9.8 or higher and is incompatible with SELinux RBAC support unless the system supports seccomp(2) filter mode. intercept_allow_setid On most systems, the dynamic loader will ignore LD_PRELOAD (or the equivalent) when running set-user-ID and set-group-ID programs, effectively disabling inter- cept mode. To prevent this from happening, sudoers will not permit a set-user-ID or set-group-ID program to be run in intercept mode unless intercept_allow_setid is enable. This flag has no ef- fect unless the intercept flag is enabled or the INTERCEPT tag has been set for the command. This flag is on by default when the intercept_type option is set to trace, otherwise it default to off. This setting is only supported by version 1.9.8 or higher. intercept_authenticate If set, commands run by an intercepted process must be authenticated when the user's time stamp is not cur- rent. For example, if a shell is run with intercept enabled, as soon as the invoking user's time stamp is out of date, subsequent commands will need to be au- thenticated. This flag has no effect unless the intercept flag is enabled or the INTERCEPT tag has been set for the command. This flag is off by default. This setting is only supported by version 1.9.8 or higher. intercept_verify If set, sudo will attempt to verify that a command run in intercept mode has the expected path name, command line arguments and environment. The process will be stopped after execve(2) has com- pleted but before the new command has had a chance to run. To verify the command, sudo will read the com- mand's path from /proc/PID/exe, the command line argu- ments and environment from the process's memory, and compare them against the arguments that were passed to execve(2). In the event of a mismatch, the command will be sent a SIGKILL signal and terminated. This can help prevent a time of check versus time of use issue with intercept mode where the execve(2) argu- ments could be altered after the sudoers policy check. The checks can only be performed if the proc(5) file system is available. This flag has no effect unless the intercept flag is enabled or the INTERCEPT tag has been set for the command and the intercept_type option is set to trace. This flag is on by default. This setting is only supported by version 1.9.12 or higher. netgroup_tuple If set, netgroup lookups will be performed using the full netgroup tuple: host name, user name, and domain (if one is set). Historically, sudo only matched the user name and domain for netgroups used in a User_List and only matched the host name and domain for netgroups used in a Host_List. This flag is off by default. noexec If set, all commands run via sudo will behave as if the NOEXEC tag has been set, unless overridden by an EXEC tag. See the description of EXEC and NOEXEC above as well as the Preventing shell escapes section at the end of this manual. This flag is off by default. noninteractive_auth If set, authentication will be attempted even in non- interactive mode (when sudo's -n option is specified). This allows authentication methods that don't require user interaction to succeed. Authentication methods that require input from the user's terminal will still fail. If disabled, authentication will not be at- tempted in non-interactive mode. This flag is off by default. This setting is only supported by version 1.9.10 or higher. pam_acct_mgmt On systems that use PAM for authentication, sudo will perform PAM account validation for the invoking user by default. The actual checks performed depend on which PAM modules are configured. If enabled, account vali- dation will be performed regardless of whether or not a password is required. This flag is on by default. This setting is only supported by version 1.8.28 or higher. pam_rhost On systems that use PAM for authentication, sudo will set the PAM remote host value to the name of the local host when the pam_rhost flag is enabled. On Linux sys- tems, enabling pam_rhost may result in DNS lookups of the local host name when PAM is initialized. On So- laris versions prior to Solaris 8, pam_rhost must be enabled if pam_ruser is also enabled to avoid a crash in the Solaris PAM implementation. This flag is off by default on systems other than So- laris. This setting is only supported by version 1.9.0 or higher. pam_ruser On systems that use PAM for authentication, sudo will set the PAM remote user value to the name of the user that invoked sudo when the pam_ruser flag is enabled. This flag is on by default. This setting is only supported by version 1.9.0 or higher. pam_session On systems that use PAM for authentication, sudo will create a new PAM session for the command to be run in. Unless sudo is given the -i or -s options, PAM session modules are run with the "silent" flag enabled. This prevents last login information from being displayed for every command on some systems. Disabling pam_session may be needed on older PAM implementations or on operating systems where opening a PAM session changes the utmp or wtmp files. If PAM session support is disabled, resource limits may not be updated for the command being run. If pam_session, pam_setcred, and use_pty are disabled, log_servers has not been set and I/O logging has not been configured, sudo will execute the command directly instead of running it as a child process. This flag is on by default. This setting is only supported by version 1.8.7 or higher. pam_setcred On systems that use PAM for authentication, sudo will attempt to establish credentials for the target user by default, if supported by the underlying authentication system. One example of a credential is a Kerberos ticket. If pam_session, pam_setcred, and use_pty are disabled, log_servers has not been set and I/O logging has not been configured, sudo will execute the command directly instead of running it as a child process. This flag is on by default. This setting is only supported by version 1.8.8 or higher. passprompt_override If set, the prompt specified by passprompt or the SUDO_PROMPT environment variable will always be used and will replace the prompt provided by a PAM module or other authentication method. This flag is off by de- fault. path_info Normally, sudo will tell the user when a command could not be found in their PATH environment variable. Some sites may wish to disable this as it could be used to gather information on the location of executables that the normal user does not have access to. The disadvan- tage is that if the executable is simply not in the user's PATH, sudo will tell the user that they are not allowed to run it, which can be confusing. This flag is on by default. preserve_groups By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vec- tor is left unaltered. The real and effective group- IDs, however, are still set to match the target user. This flag is off by default. pwfeedback By default, sudo reads the password like most other Unix programs, by turning off echo until the user hits the return (or enter) key. Some users become confused by this as it appears to them that sudo has hung at this point. When pwfeedback is set, sudo will provide visual feedback when the user presses a key. This does have a security impact as an onlooker may be able to determine the length of the password being entered. This flag is off by default. requiretty If set, sudo will only run when the user is logged in to a real tty. When this flag is set, sudo can only be run from a login session and not via other means such as cron(8) or cgi-bin scripts. This flag is off by de- fault. root_sudo If set, root is allowed to run sudo too. Disabling this prevents users from "chaining" sudo commands to get a root shell by doing something like `sudo sudo /bin/sh'. Note, however, that turning off root_sudo will also prevent root from running sudoedit. Dis- abling root_sudo provides no real additional security; it exists purely for historical reasons. This flag is on by default. rootpw If set, sudo will prompt for the root password instead of the password of the invoking user when running a command or editing a file. This flag is off by de- fault. runas_allow_unknown_id If enabled, allow matching of runas user and group IDs that are not present in the password or group data- bases. In addition to explicitly matching unknown user or group IDs in a Runas_List, this option also allows the ALL alias to match unknown IDs. This flag is off by default. This setting is only supported by version 1.8.30 or higher. Older versions of sudo always allowed matching of unknown user and group IDs. runas_check_shell If enabled, sudo will only run commands as a user whose shell appears in the /etc/shells file, even if the in- voking user's Runas_List would otherwise permit it. If no /etc/shells file is present, a system-dependent list of built-in default shells is used. On many operating systems, system users such as "bin", do not have a valid shell and this flag can be used to prevent com- mands from being run as those users. This flag is off by default. This setting is only supported by version 1.8.30 or higher. runaspw If set, sudo will prompt for the password of the user defined by the runas_default option (defaults to root) instead of the password of the invoking user when run- ning a command or editing a file. This flag is off by default. set_home If enabled and sudo is invoked with the -s option, the HOME environment variable will be set to the home di- rectory of the target user (which is the runas_default user unless the -u option is used). This flag is largely obsolete and has no effect unless the env_reset flag has been disabled or HOME is present in the env_keep list, both of which are strongly discouraged. This flag is off by default. set_logname Normally, sudo will set the LOGNAME and USER environ- ment variables to the name of the target user (the user specified by runas_default unless the -u option is given). However, since some programs (including the RCS revision control system) use LOGNAME to determine the real identity of the user, it may be desirable to change this behavior. This can be done by negating the set_logname option. The set_logname option will have no effect if the env_reset option has not been disabled and the env_keep list contains LOGNAME or USER. This flag is on by default. set_utmp When enabled, sudo will create an entry in the utmp (or utmpx) file when a pseudo-terminal is allocated. A pseudo-terminal is allocated by sudo when it is running in a terminal and one or more of the log_input, log_output, log_stdin, log_stdout, log_stderr, log_ttyin, log_ttyout, or use_pty flags is enabled. By default, the new entry will be a copy of the user's ex- isting utmp entry (if any), with the tty, time, type, and pid fields updated. This flag is on by default. setenv Allow the user to disable the env_reset option from the command line via the -E option. Additionally, environ- ment variables set via the command line are not subject to the restrictions imposed by env_check, env_delete, or env_keep. As such, only trusted users should be al- lowed to set variables in this manner. This flag is off by default. shell_noargs If set and sudo is invoked with no arguments it acts as if the -s option had been given. That is, it runs a shell as root (the shell is determined by the SHELL en- vironment variable if it is set, falling back on the shell listed in the invoking user's /etc/passwd entry if not). This flag is off by default. stay_setuid Normally, when sudo executes a command the real and ef- fective user-IDs are set to the target user (root by default). This option changes that behavior such that the real user-ID is left as the invoking user's user- ID. In other words, this makes sudo act as a set-user- ID wrapper. This can be useful on systems that disable some potentially dangerous functionality when a program is run set-user-ID. This option is only effective on systems that support either the setreuid(2) or setresuid(2) system call. This flag is off by default. sudoedit_checkdir If set, sudoedit will check all directory components of the path to be edited for writability by the invoking user. Symbolic links will not be followed in writable directories and sudoedit will refuse to edit a file lo- cated in a writable directory. These restrictions are not enforced when sudoedit is run by root. On some systems, if all directory components of the path to be edited are not readable by the target user, sudoedit will be unable to edit the file. This flag is on by default. This setting was first introduced in version 1.8.15 but initially suffered from a race condition. The check for symbolic links in writable intermediate directories was added in version 1.8.16. sudoedit_follow By default, sudoedit will not follow symbolic links when opening files. The sudoedit_follow option can be enabled to allow sudoedit to open symbolic links. It may be overridden on a per-command basis by the FOLLOW and NOFOLLOW tags. This flag is off by default. This setting is only supported by version 1.8.15 or higher. syslog_pid When logging via syslog(3), include the process ID in the log entry. This flag is off by default. This setting is only supported by version 1.8.21 or higher. targetpw If set, sudo will prompt for the password of the user specified by the -u option (defaults to the value of runas_default) instead of the password of the invoking user when running a command or editing a file. This flag precludes the use of a user-ID not listed in the passwd database as an argument to the -u option. This flag is off by default. tty_tickets If set, users must authenticate on a per-tty basis. With this flag enabled, sudo will use a separate record in the time stamp file for each terminal. If disabled, a single record is used for all login sessions. This option has been superseded by the timestamp_type option. umask_override If set, sudo will set the umask as specified in the sudoers file without modification. This makes it pos- sible to specify a umask in the sudoers file that is more permissive than the user's own umask and matches historical behavior. If umask_override is not set, sudo will set the umask to be the union of the user's umask and what is specified in sudoers. This flag is off by default. use_loginclass If set, sudo will apply the defaults specified for the target user's login class if one exists. Only avail- able if sudo is configured with the --with-logincap op- tion. This flag is off by default. use_netgroups If set, netgroups (prefixed with `+'), may be used in place of a user or host. For LDAP-based sudoers, net- group support requires an expensive sub-string match on the server unless the NETGROUP_BASE directive is present in the /etc/ldap.conf file. If netgroups are not needed, this option can be disabled to reduce the load on the LDAP server. This flag is on by default. use_pty If set, and sudo is running in a terminal, the command will be run in a pseudo-terminal (even if no I/O log- ging is being done). If the sudo process is not at- tached to a terminal, use_pty has no effect. A malicious program run under sudo may be capable of injecting commands into the user's terminal or running a background process that retains access to the user's terminal device even after the main program has fin- ished executing. By running the command in a separate pseudo-terminal, this attack is no longer possible. This flag is off by default. user_command_timeouts If set, the user may specify a timeout on the command line. If the timeout expires before the command has exited, the command will be terminated. If a timeout is specified both in the sudoers file and on the com- mand line, the smaller of the two timeouts will be used. See the Timeout_Spec section for a description of the timeout syntax. This flag is off by default. This setting is only supported by version 1.8.20 or higher. utmp_runas If set, sudo will store the name of the runas user when updating the utmp (or utmpx) file. By default, sudo stores the name of the invoking user. This flag is off by default. visiblepw By default, sudo will refuse to run if the user must enter a password but it is not possible to disable echo on the terminal. If the visiblepw flag is set, sudo will prompt for a password even when it would be visi- ble on the screen. This makes it possible to run things like `ssh somehost sudo ls' since by default, ssh(1) does not allocate a tty when running a command. This flag is off by default. Integers: closefrom Before it executes a command, sudo will close all open file descriptors other than standard input, standard output, and standard error (file descriptors 0-2). The closefrom option can be used to specify a different file descriptor at which to start closing. The default is 3. command_timeout The maximum amount of time a command is allowed to run before it is terminated. See the Timeout_Spec section for a description of the timeout syntax. This setting is only supported by version 1.8.20 or higher. log_server_timeout The maximum amount of time to wait when connecting to a log server or waiting for a server response. See the Timeout_Spec section for a description of the timeout syntax. The default value is 30 seconds. This setting is only supported by version 1.9.0 or higher. maxseq The maximum sequence number that will be substituted for the `%{seq}' escape in the I/O log file (see the iolog_dir description below for more information). While the value substituted for `%{seq}' is in base 36, maxseq itself should be expressed in decimal. Values larger than 2176782336 (which corresponds to the base 36 sequence number "ZZZZZZ") will be silently truncated to 2176782336. The default value is 2176782336. Once the local sequence number reaches the value of maxseq, it will "roll over" to zero, after which sudoers will truncate and re-use any existing I/O log path names. This setting is only supported by version 1.8.7 or higher. passwd_tries The number of tries a user gets to enter his/her pass- word before sudo logs the failure and exits. The de- fault is 3. syslog_maxlen On many systems, syslog(3) has a relatively small log buffer. IETF RFC 5424 states that syslog servers must support messages of at least 480 bytes and should sup- port messages up to 2048 bytes. By default, sudoers creates log messages up to 980 bytes which corresponds to the historic BSD syslog implementation which used a 1024 byte buffer to store the message, date, hostname, and program name. To prevent syslog messages from be- ing truncated, sudoers will split up log messages that are larger than syslog_maxlen bytes. When a message is split, additional parts will include the string "(command continued)" after the user name and before the continued command line arguments. This setting is only supported by version 1.8.19 or higher. Integers that can be used in a boolean context: loglinelen Number of characters per line for the file log. This value is used to decide when to wrap lines for nicer log files. This has no effect on the syslog log file, only the file log. The default is 80 (use 0 or negate the option to disable word wrap). passwd_timeout Number of minutes before the sudo password prompt times out, or 0 for no timeout. The timeout may include a fractional component if minute granularity is insuffi- cient, for example 2.5. The default is 5. timestamp_timeout Number of minutes that can elapse before sudo will ask for a password again. The timeout may include a frac- tional component if minute granularity is insufficient, for example 2.5. The default is 5. Set this to 0 to always prompt for a password. If set to a value less than 0 the user's time stamp will not expire until the system is rebooted. This can be used to allow users to create or delete their own time stamps via `sudo -v' and `sudo -k' respectively. umask File mode creation mask to use when running the com- mand. Negate this option or set it to 0777 to prevent sudoers from changing the umask. Unless the umask_override flag is set, the actual umask will be the union of the user's umask and the value of the umask setting, which defaults to 0022. This guarantees that sudo never lowers the umask when running a com- mand. If umask is explicitly set in sudoers, it will override any umask setting in PAM or login.conf. If umask is not set in sudoers, the umask specified by PAM or lo- gin.conf will take precedence. The umask setting in PAM is not used for sudoedit, which does not create a new PAM session. Strings: authfail_message Message that is displayed after a user fails to authen- ticate. The message may include the `%d' escape which will expand to the number of failed password attempts. If set, it overrides the default message, "%d incorrect password attempt(s)". badpass_message Message that is displayed if a user enters an incorrect password. The default is "Sorry, try again." unless insults are enabled. editor A colon (`:') separated list of editor path names used by sudoedit and visudo. For sudoedit, this list is used to find an editor when none of the SUDO_EDITOR, VISUAL or EDITOR environment variables are set to an editor that exists and is executable. For visudo, it is used as a white list of allowed editors; visudo will choose the editor that matches the user's SUDO_EDITOR, VISUAL or EDITOR environment variable if possible, or the first editor in the list that exists and is exe- cutable if not. Unless invoked as sudoedit, sudo does not preserve the SUDO_EDITOR, VISUAL or EDITOR environ- ment variables unless they are present in the env_keep list or the env_reset option is disabled. The default is /usr/bin/vi. intercept_type The underlying mechanism used by the intercept and log_subcmds options. It has the following possible values: dso Preload a dynamic shared object (shared li- brary) that intercepts the execve(2), execl(3), execle(3), execlp(3), execv(3), execvp(3), execvpe(3), and system(3) library functions. A value of dso is incompatible with sudo's SELinux RBAC support. trace Use ptrace(2) to intercept the execve(2) system call. This is only supported on Linux systems where seccomp(2) filtering is enabled. If the /proc/sys/kernel/seccomp/actions_avail file is missing or does not contain a "trap" element, setting intercept_type to trace will have no effect and dso will be used instead. The default is to use trace if it is supported by the system and dso if it is not. iolog_dir The top-level directory to use when constructing the path name for the input/output log directory. Only used if the log_input or log_output options are enabled or when the LOG_INPUT or LOG_OUTPUT tags are present for a command. The session sequence number, if any, is stored in the directory. The default is /var/log/sudo-io. The following percent (`%') escape sequences are sup- ported: %{seq} expanded to a monotonically increasing base-36 sequence number, such as 0100A5, where every two digits are used to form a new directory, e.g., 01/00/A5 %{user} expanded to the invoking user's login name %{group} expanded to the name of the invoking user's real group-ID %{runas_user} expanded to the login name of the user the com- mand will be run as (e.g., root) %{runas_group} expanded to the group name of the user the com- mand will be run as (e.g., wheel) %{hostname} expanded to the local host name without the do- main name %{command} expanded to the base name of the command being run In addition, any escape sequences supported by the sys- tem's strftime(3) function will be expanded. To include a literal `%' character, the string `%%' should be used. iolog_file The path name, relative to iolog_dir, in which to store input/output logs when the log_input or log_output op- tions are enabled or when the LOG_INPUT or LOG_OUTPUT tags are present for a command. iolog_file may contain directory components. The default is `%{seq}'. See the iolog_dir option above for a list of supported percent (`%') escape sequences. In addition to the escape sequences, path names that end in six or more Xs will have the Xs replaced with a unique combination of digits and letters, similar to the mktemp(3) function. If the path created by concatenating iolog_dir and iolog_file already exists, the existing I/O log file will be truncated and overwritten unless iolog_file ends in six or more Xs. iolog_flush If set, sudo will flush I/O log data to disk after each write instead of buffering it. This makes it possible to view the logs in real-time as the program is execut- ing but may significantly reduce the effectiveness of I/O log compression. This flag is off by default. This setting is only supported by version 1.8.20 or higher. iolog_group The group name to look up when setting the group-ID on new I/O log files and directories. If iolog_group is not set, the primary group-ID of the user specified by iolog_user is used. If neither iolog_group nor iolog_user are set, I/O log files and directories are created with group-ID 0. This setting is only supported by version 1.8.19 or higher. iolog_mode The file mode to use when creating I/O log files. Mode bits for read and write permissions for owner, group, or other are honored, everything else is ignored. The file permissions will always include the owner read and write bits, even if they are not present in the speci- fied mode. When creating I/O log directories, search (execute) bits are added to match the read and write bits specified by iolog_mode. Defaults to 0600 (read and write by user only). This setting is only supported by version 1.8.19 or higher. iolog_user The user name to look up when setting the user and group-IDs on new I/O log files and directories. If iolog_group is set, it will be used instead of the user's primary group-ID. By default, I/O log files and directories are created with user and group-ID 0. This setting can be useful when the I/O logs are stored on a Network File System (NFS) share. Having a dedi- cated user own the I/O log files means that sudoers does not write to the log files as user-ID 0, which is usually not permitted by NFS. This setting is only supported by version 1.8.19 or higher. lecture_status_dir The directory in which sudo stores per-user lecture status files. Once a user has received the lecture, a zero-length file is created in this directory so that sudo will not lecture the user again. This directory should not be cleared when the system reboots. The de- fault is /var/db/sudo/lectured. log_server_cabundle The path to a certificate authority bundle file, in PEM format, to use instead of the system's default certifi- cate authority database when authenticating the log server. The default is to use the system's default certificate authority database. This setting has no effect unless log_servers is set and the remote log server is secured with TLS. This setting is only supported by version 1.9.0 or higher. log_server_peer_cert The path to the sudo client's certificate file, in PEM format. This setting is required when the remote log server is secured with TLS and client certificate vali- dation is enabled. For sudo_logsrvd, client certifi- cate validation is controlled by the tls_checkpeer op- tion, which defaults to false. This setting is only supported by version 1.9.0 or higher. log_server_peer_key The path to the sudo client's private key file, in PEM format. This setting is required when the remote log server is secured with TLS and client certificate vali- dation is enabled. For sudo_logsrvd, client certifi- cate validation is controlled by the tls_checkpeer flag, which defaults to false. This setting is only supported by version 1.9.0 or higher. mailsub Subject of the mail sent to the mailto user. The es- cape `%h' will expand to the host name of the machine. Default is "*** SECURITY information for %h ***". noexec_file As of sudo version 1.8.1 this option is no longer sup- ported. The path to the noexec file should now be set in the sudo.conf(5) file. pam_askpass_service On systems that use PAM for authentication, this is the service name used when the -A option is specified. The default value is either `@pam_service@' or `sudo', de- pending on whether or not the -i option is also speci- fied. See the description of pam_service for more in- formation. This setting is only supported by version 1.9.9 or higher. pam_login_service On systems that use PAM for authentication, this is the service name used when the -i option is specified. The default value is `sudo'. See the description of pam_service for more information. This setting is only supported by version 1.8.8 or higher. pam_service On systems that use PAM for authentication, the service name specifies the PAM policy to apply. This usually corresponds to an entry in the pam.conf file or a file in the /etc/pam.d directory. The default value is `sudo'. This setting is only supported by version 1.8.8 or higher. passprompt The default prompt to use when asking for a password; can be overridden via the -p option or the SUDO_PROMPT environment variable. The following percent (`%') es- cape sequences are supported: %H expanded to the local host name including the do- main name (only if the machine's host name is fully qualified or the fqdn option is set) %h expanded to the local host name without the do- main name %p expanded to the user whose password is being asked for (respects the rootpw, targetpw and runaspw flags in sudoers) %U expanded to the login name of the user the com- mand will be run as (defaults to root) %u expanded to the invoking user's login name %% two consecutive `%' characters are collapsed into a single `%' character On systems that use PAM for authentication, passprompt will only be used if the prompt provided by the PAM module matches the string "Password: " or "username's Password: ". This ensures that the passprompt setting does not interfere with challenge-response style au- thentication. The passprompt_override flag can be used to change this behavior. The default value is `Password: '. runas_default The default user to run commands as if the -u option is not specified on the command line. This defaults to root. sudoers_locale Locale to use when parsing the sudoers file, logging commands, and sending email. Changing the locale may affect how sudoers is interpreted. Defaults to `C'. timestamp_type sudoers uses per-user time stamp files for credential caching. The timestamp_type option can be used to specify the type of time stamp record used. It has the following possible values: global A single time stamp record is used for all of a user's login sessions, regardless of the termi- nal or parent process ID. An additional record is used to serialize password prompts when sudo is used multiple times in a pipeline, but this does not affect authentication. ppid A single time stamp record is used for all pro- cesses with the same parent process ID (usually the shell). Commands run from the same shell (or other common parent process) will not re- quire a password for timestamp_timeout minutes (5 by default). Commands run via sudo with a different parent process ID, for example from a shell script, will be authenticated separately. tty One time stamp record is used for each termi- nal, which means that a user's login sessions are authenticated separately. If no terminal is present, the behavior is the same as ppid. Commands run from the same terminal will not require a password for timestamp_timeout min- utes (5 by default). kernel The time stamp is stored in the kernel as an attribute of the terminal device. If no termi- nal is present, the behavior is the same as ppid. Negative timestamp_timeout values are not supported and positive values are limited to a maximum of 60 minutes. This is currently only supported on OpenBSD. The default value is tty. This setting is only supported by version 1.8.21 or higher. timestampdir The directory in which sudo stores its time stamp files. This directory should be cleared when the sys- tem reboots. The default is /var/run/sudo/ts. timestampowner The owner of the lecture status directory, time stamp directory and all files stored therein. The default is root. Strings that can be used in a boolean context: admin_flag The admin_flag option specifies the path to a file that is created the first time a user that is a member of the sudo or admin groups runs sudo. Only available if sudo is con- figured with the --enable-admin-flag option. The default value is ~/.sudo_as_admin_successful. env_file The env_file option specifies the fully qualified path to a file containing variables to be set in the environment of the program being run. Entries in this file should either be of the form `VARIABLE=value' or `export VARIABLE=value'. The value may optionally be enclosed in single or double quotes. Variables in this file are only added if the vari- able does not already exist in the environment. This file is considered to be part of the security policy, its con- tents are not subject to other sudo environment restric- tions such as env_keep and env_check. exempt_group Users in this group are exempt from password and PATH re- quirements. The group name specified should not include a `%' prefix. This is not set by default. fdexec Determines whether sudo will execute a command by its path or by an open file descriptor. It has the following possi- ble values: always Always execute by file descriptor. never Never execute by file descriptor. digest_only Only execute by file descriptor if the command has an associated digest in the sudoers file. The default value is digest_only. This avoids a time of check versus time of use race condition when the command is located in a directory writable by the invoking user. fdexec will change the first element of the argument vector for scripts ($0 in the shell) due to the way the kernel runs script interpreters. Instead of being a normal path, it will refer to a file descriptor. For example, /dev/fd/4 on Solaris and /proc/self/fd/4 on Linux. A workaround is to use the SUDO_COMMAND environment variable instead. The fdexec setting is only used when the command is matched by path name. It has no effect if the command is matched by the built-in ALL alias. This setting is only supported by version 1.8.20 or higher. If the operating system does not support the fexecve(2) system call, this setting has no effect. group_plugin A string containing a sudoers group plugin with optional arguments. The string should consist of the plugin path, either fully-qualified or relative to the /usr/local/libexec/sudo directory, followed by any configu- ration arguments the plugin requires. These arguments (if any) will be passed to the plugin's initialization func- tion. If arguments are present, the string must be en- closed in double quotes (""). On 64-bit systems, if the plugin is present but cannot be loaded, sudoers will look for a 64-bit version and, if it exists, load that as a fallback. The exact rules for this vary by system. On Solaris, if the plugin is stored in a directory ending in "lib", sudoers will create a fallback path by appending "/64" to the directory name; /usr/lib/sudo_plugin.so becomes /usr/lib/64/sudo_plugin.so. On Linux, a directory ending in "lib" will be transformed to "lib64" as the fallback path; /usr/lib/sudo_plugin.so becomes /usr/lib64/sudo_plugin.so. On all other systems, the fallback path is generated by adding a "64" before the file extension; sudo_plugin.so becomes sudo_plugin64.so. For more information see GROUP PROVIDER PLUGINS. lecture This option controls when a short lecture will be printed along with the password prompt. It has the following pos- sible values: always Always lecture the user. never Never lecture the user. once Only lecture the user the first time they run sudo. If no value is specified, a value of once is implied. Negating the option results in a value of never being used. The default value is once. lecture_file Path to a file containing an alternate sudo lecture that will be used in place of the standard lecture if the named file exists. By default, sudo uses a built-in lecture. listpw This option controls when a password will be required when a user runs sudo with the -l option. It has the following possible values: all All the user's sudoers file entries for the cur- rent host must have the NOPASSWD flag set to avoid entering a password. always The user must always enter a password to use the -l option. any At least one of the user's sudoers file entries for the current host must have the NOPASSWD flag set to avoid entering a password. never The user need never enter a password to use the -l option. If no value is specified, a value of any is implied. Negating the option results in a value of never being used. The default value is any. log_format The event log format. Supported log formats are: json Logs in JSON format. JSON log entries contain the full user details as well as the execution environment if the command was allowed. Due to limitations of the protocol, JSON events sent via syslog may be truncated. sudo Traditional sudo-style logs, see EVENT LOGGING for a description of the log file format. This setting affects logs sent via syslog(3) as well as the file specified by the logfile setting, if any. The default value is sudo. logfile Path to the sudo log file (not the syslog log file). Set- ting a path turns on logging to a file; negating this op- tion turns it off. By default, sudo logs via syslog. mailerflags Flags to use when invoking mailer. Defaults to -t. mailerpath Path to mail program used to send warning mail (negate to prevent sudo from sending mail). Defaults to the path to sendmail found at configure time. mailfrom Address to use for the "from" address when sending warning and error mail. The address should be enclosed in double quotes ("") to protect against sudo interpreting the `@' sign. Defaults to the name of the user running sudo. mailto Address to send warning and error mail to (negate to pre- vent sudo from sending mail). The address should be en- closed in double quotes ("") to protect against sudo inter- preting the `@' sign. Defaults to root. rlimit_as The maximum size to which the process's address space may grow (in bytes), if supported by the operating system. See Resource limits for more information. rlimit_core The largest size core dump file that may be created (in bytes). See Resource limits for more information. De- faults to 0 (no core dump created). rlimit_cpu The maximum amount of CPU time that the process may use (in seconds). See Resource limits for more information. rlimit_data The maximum size of the data segment for the process (in bytes). See Resource limits for more information. rlimit_fsize The largest size file that the process may create (in bytes). See Resource limits for more information. rlimit_locks The maximum number of locks that the process may establish, if supported by the operating system. See Resource limits for more information. rlimit_memlock The maximum size that the process may lock in memory (in bytes), if supported by the operating system. See Resource limits for more information. rlimit_nofile The maximum number of files that the process may have open. See Resource limits for more information. rlimit_nproc The maximum number of processes that the user may run si- multaneously. See Resource limits for more information. rlimit_rss The maximum size to which the process's resident set size may grow (in bytes). See Resource limits for more informa- tion. rlimit_stack The maximum size to which the process's stack may grow (in bytes). See Resource limits for more information. restricted_env_file The restricted_env_file option specifies the fully quali- fied path to a file containing variables to be set in the environment of the program being run. Entries in this file should either be of the form `VARIABLE=value' or `export VARIABLE=value'. The value may optionally be enclosed in single or double quotes. Variables in this file are only added if the variable does not already exist in the envi- ronment. Unlike env_file, the file's contents are not trusted and are processed in a manner similar to that of the invoking user's environment. If env_reset is enabled, variables in the file will only be added if they are matched by either the env_check or env_keep list. If env_reset is disabled, variables in the file are added as long as they are not matched by the env_delete list. In either case, the contents of restricted_env_file are pro- cessed before the contents of env_file. runchroot If set, sudo will use this value for the root directory when running a command. The special value "*" will allow the user to specify the root directory via sudo's -R op- tion. See the Chroot_Spec section for more details. It is only possible to use runchroot as a command-specific Defaults setting if the command exists with the same path both inside and outside the chroot jail. This restriction does not apply to global, host, or user-based Defaults set- tings or to a Cmnd_Spec that includes a Chroot_Spec. This setting is only supported by version 1.9.3 or higher. runcwd If set, sudo will use this value for the working directory when running a command. The special value "*" will allow the user to specify the working directory via sudo's -D op- tion. See the Chdir_Spec section for more details. This setting is only supported by version 1.9.3 or higher. secure_path If set, sudo will use this value in place of the user's PATH environment variable. This option can be used to re- set the PATH to a known good value that contains directo- ries for system administrator commands such as /usr/sbin. Users in the group specified by the exempt_group option are not affected by secure_path. This option is not set by de- fault. syslog Syslog facility if syslog is being used for logging (negate to disable syslog logging). Defaults to authpriv. The following syslog facilities are supported: authpriv (if your OS supports it), auth, daemon, user, local0, local1, local2, local3, local4, local5, local6, and local7. syslog_badpri Syslog priority to use when the user is not allowed to run a command or when authentication is unsuccessful. Defaults to alert. The following syslog priorities are supported: alert, crit, debug, emerg, err, info, notice, warning, and none. Negat- ing the option or setting it to a value of none will dis- able logging of unsuccessful commands. syslog_goodpri Syslog priority to use when the user is allowed to run a command and authentication is successful. Defaults to no- tice. See syslog_badpri for the list of supported syslog priori- ties. Negating the option or setting it to a value of none will disable logging of successful commands. verifypw This option controls when a password will be required when a user runs sudo with the -v option. It has the following possible values: all All the user's sudoers file entries for the current host must have the NOPASSWD flag set to avoid en- tering a password. always The user must always enter a password to use the -v option. any At least one of the user's sudoers file entries for the current host must have the NOPASSWD flag set to avoid entering a password. never The user need never enter a password to use the -v option. If no value is specified, a value of all is implied. Negating the option results in a value of never being used. The default value is all. Lists that can be used in a boolean context: env_check Environment variables to be removed from the user's en- vironment unless they are considered "safe". For all variables except TZ, "safe" means that the variable's value does not contain any `%' or `/' characters. This can be used to guard against printf-style format vul- nerabilities in poorly-written programs. The TZ vari- able is considered unsafe if any of the following are true: o It consists of a fully-qualified path name, option- ally prefixed with a colon (`:'), that does not match the location of the zoneinfo directory. o It contains a .. path element. o It contains white space or non-printable characters. o It is longer than the value of PATH_MAX. The argument may be a double-quoted, space-separated list or a single value without double-quotes. The list can be replaced, added to, deleted from, or disabled by using the `=', `+=', `-=', and `!' operators respec- tively. Regardless of whether the env_reset option is enabled or disabled, variables specified by env_check will be preserved in the environment if they pass the aforementioned check. The global list of environment variables to check is displayed when sudo is run by root with the -V option. env_delete Environment variables to be removed from the user's en- vironment when the env_reset option is not in effect. The argument may be a double-quoted, space-separated list or a single value without double-quotes. The list can be replaced, added to, deleted from, or disabled by using the `=', `+=', `-=', and `!' operators respec- tively. The global list of environment variables to remove is displayed when sudo is run by root with the -V option. Many operating systems will remove poten- tially dangerous variables from the environment of any set-user-ID process (such as sudo). env_keep Environment variables to be preserved in the user's en- vironment when the env_reset option is in effect. This allows fine-grained control over the environment sudo-spawned processes will receive. The argument may be a double-quoted, space-separated list or a single value without double-quotes. The list can be replaced, added to, deleted from, or disabled by using the `=', `+=', `-=', and `!' operators respectively. The global list of variables to keep is displayed when sudo is run by root with the -V option. Preserving the HOME environment variable has security implications since many programs use it when searching for configuration or data files. Adding HOME to env_keep may enable a user to run unrestricted commands via sudo and is strongly discouraged. Users wishing to edit files with sudo should run sudoedit (or sudo -e) to get their accustomed editor configuration instead of invoking the editor directly. log_servers A list of one or more servers to use for remote event and I/O log storage, separated by white space. Log servers must be running sudo_logsrvd or another service that implements the protocol described by sudo_logsrv.proto(5). Server addresses should be of the form "host[:port][(tls)]". The host portion may be a host name, an IPv4 address, or an IPv6 address in square brackets. If the optional tls flag is present, the connection will be secured with Transport Layer Security (TLS) version 1.2 or 1.3. Versions of TLS prior to 1.2 are not supported. If a port is specified, it may either be a port number or a well-known service name as defined by the system service name database. If no port is specified, port 30343 will be used for plaintext connections and port 30344 will be used for TLS connections. When log_servers is set, event log data will be logged both locally (see the syslog and log_file settings) as well as remotely, but I/O log data will only be logged remotely. If multiple hosts are specified, they will be attempted in reverse order. If no log servers are available, the user will not be able to run a command unless either the ignore_iolog_errors flag (I/O logging enabled) or the ignore_log_errors flag (I/O logging disabled) is set. Likewise, if the connection to the log server is interrupted while sudo is running, the command will be terminated unless the ignore_iolog_errors flag (I/O logging enabled) or the ignore_log_errors flag (I/O logging disabled) is set. This setting is only supported by version 1.9.0 or higher. passprompt_regex A list of POSIX extended regular expressions used to match password prompts in the terminal output. As an extension, if the regular expression begins with "(?i)", it will be matched in a case-insensitive man- ner. Each regular expression is limited to 1024 char- acters. This option is only used when log_passwords has been disabled. The default value is "[Pp]assword[: ]*" This setting is only supported by version 1.9.10 or higher. GROUP PROVIDER PLUGINS The sudoers plugin supports its own plugin interface to allow non-Unix group lookups which can query a group source other than the standard Unix group database. This can be used to implement support for the nonunix_group syntax described earlier. Group provider plugins are specified via the group_plugin setting. The argument to group_plugin should consist of the plugin path, either fully- qualified or relative to the /usr/local/libexec/sudo directory, followed by any configuration options the plugin requires. These options (if specified) will be passed to the plugin's initialization function. If options are present, the string must be enclosed in double quotes (""). The following group provider plugins are installed by default: group_file The group_file plugin supports an alternate group file that uses the same syntax as the /etc/group file. The path to the group file should be specified as an option to the plugin. For example, if the group file to be used is /etc/sudo-group: Defaults group_plugin="group_file.so /etc/sudo-group" system_group The system_group plugin supports group lookups via the standard C library functions getgrnam(3) and getgrid(3). This plugin can be used in instances where the user belongs to groups not present in the user's supplemental group vector. This plugin takes no options: Defaults group_plugin=system_group.so The group provider plugin API is described in detail in sudo_plugin(5). EVENT LOGGING sudoers can log events in either JSON or sudo format, this section de- scribes the sudo log format. Depending on sudoers configuration, sudoers can log events via syslog(3), to a local log file, or both. The log for- mat is almost identical in both cases. Accepted command log entries Commands that sudo runs are logged using the following format (split into multiple lines for readability): date hostname progname: username : TTY=ttyname ; PWD=cwd ; \ USER=runasuser ; GROUP=runasgroup ; TSID=logid ; \ ENV=env_vars COMMAND=command Where the fields are as follows: date The date the command was run. Typically, this is in the format "MMM, DD, HH:MM:SS". If logging via syslog(3), the actual date format is controlled by the syslog daemon. If logging to a file and the log_year option is enabled, the date will also include the year. hostname The name of the host sudo was run on. This field is only present when logging via syslog(3). progname The name of the program, usually sudo or sudoedit. This field is only present when logging via syslog(3). username The login name of the user who ran sudo. ttyname The short name of the terminal (e.g., "console", "tty01", or "pts/0") sudo was run on, or "unknown" if there was no terminal present. cwd The current working directory that sudo was run in. runasuser The user the command was run as. runasgroup The group the command was run as if one was specified on the command line. logid An I/O log identifier that can be used to replay the com- mand's output. This is only present when the log_input or log_output option is enabled. env_vars A list of environment variables specified on the command line, if specified. command The actual command that was executed. Messages are logged using the locale specified by sudoers_locale, which defaults to the `C' locale. Denied command log entries If the user is not allowed to run the command, the reason for the denial will follow the user name. Possible reasons include: user NOT in sudoers The user is not listed in the sudoers file. user NOT authorized on host The user is listed in the sudoers file but is not allowed to run com- mands on the host. command not allowed The user is listed in the sudoers file for the host but they are not allowed to run the specified command. 3 incorrect password attempts The user failed to enter their password after 3 tries. The actual num- ber of tries will vary based on the number of failed attempts and the value of the passwd_tries option. a password is required The -n option was specified but a password was required. sorry, you are not allowed to set the following environment variables The user specified environment variables on the command line that were not allowed by sudoers. Error log entries If an error occurs, sudoers will log a message and, in most cases, send a message to the administrator via email. Possible errors include: parse error in /usr/local/etc/sudoers near line N sudoers encountered an error when parsing the specified file. In some cases, the actual error may be one line above or below the line number listed, depending on the type of error. problem with defaults entries The sudoers file contains one or more unknown Defaults settings. This does not prevent sudo from running, but the sudoers file should be checked using visudo. timestamp owner (username): No such user The time stamp directory owner, as specified by the timestampowner set- ting, could not be found in the password database. unable to open/read /usr/local/etc/sudoers The sudoers file could not be opened for reading. This can happen when the sudoers file is located on a remote file system that maps user-ID 0 to a different value. Normally, sudoers tries to open the sudoers file using group permissions to avoid this problem. Consider either chang- ing the ownership of /usr/local/etc/sudoers or adding an argument like "sudoers_uid=N" (where `N' is the user-ID that owns the sudoers file) to the end of the sudoers Plugin line in the sudo.conf(5) file. unable to open /usr/local/etc/sudoers The /usr/local/etc/sudoers file is missing. /usr/local/etc/sudoers is not a regular file The /usr/local/etc/sudoers file exists but is not a regular file or symbolic link. /usr/local/etc/sudoers is owned by uid N, should be 0 The sudoers file has the wrong owner. If you wish to change the sudoers file owner, add "sudoers_uid=N" (where `N' is the user-ID that owns the sudoers file) to the sudoers Plugin line in the sudo.conf(5) file. /usr/local/etc/sudoers is world writable The permissions on the sudoers file allow all users to write to it. The sudoers file must not be world-writable, the default file mode is 0440 (readable by owner and group, writable by none). The default mode may be changed via the "sudoers_mode" option to the sudoers Plugin line in the sudo.conf(5) file. /usr/local/etc/sudoers is owned by gid N, should be 1 The sudoers file has the wrong group ownership. If you wish to change the sudoers file group ownership, add "sudoers_gid=N" (where `N' is the group-ID that owns the sudoers file) to the sudoers Plugin line in the sudo.conf(5) file. unable to open /var/run/sudo/ts/username sudoers was unable to read or create the user's time stamp file. This can happen when timestampowner is set to a user other than root and the mode on /var/run/sudo is not searchable by group or other. The default mode for /var/run/sudo is 0711. unable to write to /var/run/sudo/ts/username sudoers was unable to write to the user's time stamp file. /var/run/sudo/ts is owned by uid X, should be Y The time stamp directory is owned by a user other than timestampowner. This can occur when the value of timestampowner has been changed. sudoers will ignore the time stamp directory until the owner is cor- rected. /var/run/sudo/ts is group writable The time stamp directory is group-writable; it should be writable only by timestampowner. The default mode for the time stamp directory is 0700. sudoers will ignore the time stamp directory until the mode is corrected. Notes on logging via syslog By default, sudoers logs messages via syslog(3). The date, hostname, and progname fields are added by the system's syslog(3) function, not sudoers itself. As such, they may vary in format on different systems. The maximum size of syslog messages varies from system to system. The syslog_maxlen setting can be used to change the maximum syslog message size from the default value of 980 bytes. For more information, see the description of syslog_maxlen. Notes on logging to a file If the logfile option is set, sudoers will log to a local file, such as /var/log/sudo. When logging to a file, sudoers uses a format similar to syslog(3), with a few important differences: 1. The progname and hostname fields are not present. 2. If the log_year option is enabled, the date will also include the year. 3. Lines that are longer than loglinelen characters (80 by default) are word-wrapped and continued on the next line with a four character indent. This makes entries easier to read for a human being, but makes it more difficult to use grep(1) on the log files. If the loglinelen option is set to 0 (or negated with a `!'), word wrap will be disabled. I/O LOGGING When I/O logging is enabled, sudo will runs the command in a pseudo-ter- minal, logging user input and/or output, depending on which sudoers flags are enabled. There are five distinct types of I/O that can be logged, each with a corresponding sudoers flag. Type Flag Description terminal input log_ttyin keystrokes entered by the user terminal output log_ttyout command output displayed to the screen standard input log_stdin input from a pipe or a file standard output log_stdout output to a pipe or a file standard error log_stderr output to a pipe or a file In addition to flags described the above, the log_input flag and LOG_INPUT command tag set both log_ttyin and log_stdin. The log_output flag and LOG_OUTPUT command tag set log_ttyout, log_stdout, and log_stderr. To capture terminal input and output, sudo run the command in a pseudo- terminal, logging the input and output before passing it on to the user. To capture the standard input, standard output or standard error, sudo uses a pipe to interpose itself between the input or output stream, log- ging the I/O before passing it to the other end of the pipe. I/O can be logged either to the local machine or to a remote log server. For local logs, I/O is logged to the directory specified by the iolog_dir option (/var/log/sudo-io by default) using a unique session ID that is included in the sudo log line, prefixed with `TSID='. The iolog_file op- tion may be used to control the format of the session ID. For remote logs, the log_servers setting is used to specify one or more log servers running sudo_logsrvd or another server that implements the protocol de- scribed by sudo_logsrv.proto(5). I/O logging pitfals When logging standard input, anything sent to the standard input will be consumed, regardless of whether or not the command run via sudo is ac- tively reading the standard input. This may have unexpected results when using sudo in a shell script that expects to process the standard input. For example, given the following shell script: #!/bin/sh sudo echo testing echo done It will behave as expected when the script is passed to the shell as a an argument: $ sh test.sh testing done However, if the script is passed to the shell on the standard input, the `sudo echo testing' command will consume the rest of the script. This means that the `echo done' statement is never executed. $ sh -s < test.sh testing There are several ways to work around this problem: 1. Redirect the standard input from /dev/null when running a command via sudo that does not need to read the standard input. sudo echo testing < /dev/null 2. Pass the script to the shell by path name instead of via the stan- dard input. sh test.sh 3. Disable logging the standard input for commands that do not need to read the standard input. Defaults!/bin/echo !log_stdin Depending on the command, it may not be desirable to log the standard in- put or standard output. For example, I/O logging of commands that send or receive large amount of data via the standard output or standard input such as rsync(1) and tar(1) could fill up the log file system with super- fluous data. It is possible to disable logging of the standard input and standard output for such commands as follows: Cmnd_Alias COPY_CMDS = /usr/bin/tar, /usr/bin/cpio, /usr/bin/rsync # Log input and output but omit stdin and stdout when copying files. Defaults log_input, log_output Defaults!COPY_CMDS !log_stdin, !log_stdout However, be aware that using the log_input flag or the LOG_INPUT command tag will also enable log_stdin. Likewise, the log_ouput flag or the LOG_OUTPUT command tag will enable log_stdout and log_stderr. Careful or- dering of rules may be necessary to achieve the results that you expect. I/O log format For both local and remote I/O logs, each log is stored in a separate di- rectory that contains the following files: log A text file containing information about the command. The first line consists of the following colon-delimited fields: the time the command was run, the name of the user who ran sudo, the name of the target user, the name of the target group (optional), the terminal that sudo was run from, and the number of lines and columns of the terminal. The second and third lines contain the working directory the command was run from and the path name of the command itself (with arguments if present). log.json A JSON-formatted file containing information about the command. This is similar to the log file but contains additional infor- mation and is easily extensible. The log.json file will be used by sudoreplay(8) in preference to the log file if it ex- ists. The file may contain the following elements: timestamp A JSON object containing time the command was run. It consists of two values, seconds and nanoseconds. columns The number of columns of the terminal the command ran on, or zero if no terminal was present. command The fully-qualified path of the command that was run. lines The number of lines of the terminal the command ran on, or zero if no terminal was present. runargv A JSON array representing the command's argument vec- tor as passed to the execve(2) system call. runenv A JSON array representing the command's environment as passed to the execve(2) system call. rungid The group ID the command ran as. This element is only present when the user specifies a group on the command line. rungroup The name of the group the command ran as. This ele- ment is only present when the user specifies a group on the command line. runuid The user ID the command ran as. runuser The name of the user the command ran as. submitcwd The current working directory at the time sudo was run. submithost The name of the host the command was run on. submituser The name of the user who ran the command via sudo. ttyname The path name of the terminal the user invoked sudo from. If the command was run in a pseudo-terminal, ttyname will be different from the terminal the com- mand actually ran in. timing Timing information used to replay the session. Each line con- sists of the I/O log entry type and amount of time since the last entry, followed by type-specific data. The I/O log entry types and their corresponding type-specific data are: 0 standard input, number of bytes in the entry 1 standard output, number of bytes in the entry 2 standard error, number of bytes in the entry 3 terminal input, number of bytes in the entry 4 terminal output, number of bytes in the entry 5 window change, new number lines and columns 6 bug compatibility for sudo 1.8.7 terminal output 7 command suspend or resume, signal received ttyin Raw input from the user's terminal, exactly as it was received. This file is only present if the log_input or log_ttyin flags are set and sudo was run from a terminal. No post-processing is performed. For manual viewing, you may wish to convert car- riage return characters in the log to line feeds. For example: `gunzip -c ttyin | tr "\r" "\n"' stdin The standard input when no terminal is present, or input redi- rected from a pipe or file. This file is only present if the log_input or log_stdin flags are set and the standard input is not connected to a terminal. ttyout Output from the pseudo-terminal (what the command writes to the screen). Terminal-specific post-processing is performed before the data is logged. This means that, for example, line feeds are usually converted to line feed/carriage return pairs and tabs may be expanded to spaces. This file is only present if the log_output or log_ttyout flags are set and sudo was run from a terminal. stdout The standard output when no terminal is present, or output redirected to a pipe or file. This file is only present if the log_output or log_stdout flags are set and the standard output is not connected to a terminal. stderr The standard error when no terminal is present, or output redi- rected to a pipe or file. This file is only present if the log_output or log_stderr flags are set and the standard error is not connected to a terminal. All files other than log are compressed in gzip format unless the compress_io flag has been disabled. Due to buffering, it is not normally possible to display the I/O logs in real-time as the program is execut- ing. The I/O log data will not be complete until the program run by sudo has exited or has been terminated by a signal. The iolog_flush flag can be used to disable buffering, in which case I/O log data is written to disk as soon as it is available. The output portion of an I/O log file can be viewed with the sudoreplay(8) utility, which can also be used to list or search the available logs. User input may contain sensitive information such as passwords (even if they are not echoed to the screen), which will be stored in the log file unencrypted. In most cases, logging the command output via log_output or LOG_OUTPUT is all that is required. When logging input, consider dis- abling the log_passwords flag. Since each session's I/O logs are stored in a separate directory, tradi- tional log rotation utilities cannot be used to limit the number of I/O logs. The simplest way to limit the number of I/O is by setting the maxseq option to the maximum number of logs you wish to store. Once the I/O log sequence number reaches maxseq, it will be reset to zero and sudoers will truncate and re-use any existing I/O logs. FILES /usr/local/etc/sudo.conf Sudo front-end configuration /usr/local/etc/sudoers List of who can run what /etc/group Local groups file /etc/netgroup List of network groups /var/log/sudo-io I/O log files /var/run/sudo/ts Directory containing time stamps for the sudoers security policy /var/db/sudo/lectured Directory containing lecture status files for the sudoers security policy /etc/environment Initial environment for -i mode on AIX and Linux systems EXAMPLES Below are example sudoers file entries. Admittedly, some of these are a bit contrived. First, we allow a few environment variables to pass and then define our aliases: # Run X applications through sudo; HOME is used to find the # .Xauthority file. Other programs use HOME to locate configuration # files and this may lead to privilege escalation! Defaults env_keep += "DISPLAY HOME" # User alias specification User_Alias FULLTIMERS = millert, mikef, dowdy User_Alias PARTTIMERS = bostley, jwfox, crawl User_Alias WEBADMIN = will, wendy, wim # Runas alias specification Runas_Alias OP = root, operator Runas_Alias DB = oracle, sybase Runas_Alias ADMINGRP = adm, oper # Host alias specification Host_Alias SPARC = bigtime, eclipse, moet, anchor :\ SGI = grolsch, dandelion, black :\ ALPHA = widget, thalamus, foobar :\ HPPA = boa, nag, python Host_Alias CUNETS = 128.138.0.0/255.255.0.0 Host_Alias CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0 Host_Alias SERVERS = primary, mail, www, ns Host_Alias CDROM = orion, perseus, hercules # Cmnd alias specification Cmnd_Alias DUMPS = /usr/bin/mt, /usr/sbin/dump, /usr/sbin/rdump,\ /usr/sbin/restore, /usr/sbin/rrestore,\ sha224:0GomF8mNN3wlDt1HD9XldjJ3SNgpFdbjO1+NsQ== \ /home/operator/bin/start_backups Cmnd_Alias KILL = /usr/bin/kill Cmnd_Alias PRINTING = /usr/sbin/lpc, /usr/bin/lprm Cmnd_Alias SHUTDOWN = /usr/sbin/shutdown Cmnd_Alias HALT = /usr/sbin/halt Cmnd_Alias REBOOT = /usr/sbin/reboot Cmnd_Alias SHELLS = /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh,\ /usr/local/bin/tcsh, /usr/bin/rsh,\ /usr/local/bin/zsh Cmnd_Alias SU = /usr/bin/su Cmnd_Alias PAGERS = /usr/bin/more, /usr/bin/pg, /usr/bin/less Here we override some of the compiled in default values. We want sudo to log via syslog(3) using the auth facility in all cases and for commands to be run with the target user's home directory as the working directory. We don't want to subject the full time staff to the sudo lecture and we want to allow them to run commands in a chroot(2) "sandbox" via the -R option. User millert need not provide a password and we don't want to reset the LOGNAME or USER environment variables when running commands as root. Additionally, on the machines in the SERVERS Host_Alias, we keep an additional local log file and make sure we log the year in each log line since the log entries will be kept around for several years. Lastly, we disable shell escapes for the commands in the PAGERS Cmnd_Alias (/usr/bin/more, /usr/bin/pg and /usr/bin/less). This will not effectively constrain users with sudo ALL privileges. # Override built-in defaults Defaults syslog=auth,runcwd=~ Defaults>root !set_logname Defaults:FULLTIMERS !lecture,runchroot=* Defaults:millert !authenticate Defaults@SERVERS log_year, logfile=/var/log/sudo.log Defaults!PAGERS noexec The User specification is the part that actually determines who may run what. root ALL = (ALL) ALL %wheel ALL = (ALL) ALL We let root and any user in group wheel run any command on any host as any user. FULLTIMERS ALL = NOPASSWD: ALL Full time sysadmins (millert, mikef, and dowdy) may run any command on any host without authenticating themselves. PARTTIMERS ALL = ALL Part time sysadmins bostley, jwfox, and crawl) may run any command on any host but they must authenticate themselves first (since the entry lacks the NOPASSWD tag). jack CSNETS = ALL The user jack may run any command on the machines in the CSNETS alias (the networks 128.138.243.0, 128.138.204.0, and 128.138.242.0). Of those networks, only 128.138.204.0 has an explicit netmask (in CIDR notation) indicating it is a class C network. For the other networks in CSNETS, the local machine's netmask will be used during matching. lisa CUNETS = ALL The user lisa may run any command on any host in the CUNETS alias (the class B network 128.138.0.0). operator ALL = DUMPS, KILL, SHUTDOWN, HALT, REBOOT, PRINTING,\ sudoedit /etc/printcap, /usr/oper/bin/ The operator user may run commands limited to simple maintenance. Here, those are commands related to backups, killing processes, the printing system, shutting down the system, and any commands in the directory /usr/oper/bin/. One command in the DUMPS Cmnd_Alias includes a sha224 digest, /home/operator/bin/start_backups. This is because the directory containing the script is writable by the operator user. If the script is modified (resulting in a digest mismatch) it will no longer be possible to run it via sudo. joe ALL = /usr/bin/su operator The user joe may only su(1) to operator. pete HPPA = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd *root* %opers ALL = (: ADMINGRP) /usr/sbin/ Users in the opers group may run commands in /usr/sbin/ as themselves with any group in the ADMINGRP Runas_Alias (the adm and oper groups). The user pete is allowed to change anyone's password except for root on the HPPA machines. Because command line arguments are matched as a sin- gle, concatenated string, the `*' wildcard will match multiple words. This example assumes that passwd(1) does not take multiple user names on the command line. On systems with GNU getopt(3), options to passwd(1) may be specified after the user argument. As a result, this rule will also allow: passwd username --expire which may not be desirable. bob SPARC = (OP) ALL : SGI = (OP) ALL The user bob may run anything on the SPARC and SGI machines as any user listed in the OP Runas_Alias (root and operator.) jim +biglab = ALL The user jim may run any command on machines in the biglab netgroup. sudo knows that "biglab" is a netgroup due to the `+' prefix. +secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser Users in the secretaries netgroup need to help manage the printers as well as add and remove users, so they are allowed to run those commands on all machines. fred ALL = (DB) NOPASSWD: ALL The user fred can run commands as any user in the DB Runas_Alias (oracle or sybase) without giving a password. john ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root* On the ALPHA machines, user john may su to anyone except root but he is not allowed to specify any options to the su(1) command. jen ALL, !SERVERS = ALL The user jen may run any command on any machine except for those in the SERVERS Host_Alias (primary, mail, www, and ns). jill SERVERS = /usr/bin/, !SU, !SHELLS For any machine in the SERVERS Host_Alias, jill may run any commands in the directory /usr/bin/ except for those commands belonging to the SU and SHELLS Cmnd_Aliases. While not specifically mentioned in the rule, the commands in the PAGERS Cmnd_Alias all reside in /usr/bin and have the noexec option set. steve CSNETS = (operator) /usr/local/op_commands/ The user steve may run any command in the directory /usr/local/op_com- mands/ but only as user operator. matt valkyrie = KILL On his personal workstation, valkyrie, matt needs to be able to kill hung processes. WEBADMIN www = (www) ALL, (root) /usr/bin/su www On the host www, any user in the WEBADMIN User_Alias (will, wendy, and wim), may run any command as user www (which owns the web pages) or sim- ply su(1) to www. ALL CDROM = NOPASSWD: /sbin/umount /CDROM,\ /sbin/mount -o nosuid\,nodev /dev/cd0a /CDROM Any user may mount or unmount a CD-ROM on the machines in the CDROM Host_Alias (orion, perseus, hercules) without entering a password. This is a bit tedious for users to type, so it is a prime candidate for encap- sulating in a shell script. SECURITY NOTES Limitations of the `!' operator It is generally not effective to "subtract" commands from ALL using the `!' operator. A user can trivially circumvent this by copying the de- sired command to a different name and then executing that. For example: bill ALL = ALL, !SU, !SHELLS Doesn't really prevent bill from running the commands listed in SU or SHELLS since he can simply copy those commands to a different name, or use a shell escape from an editor or other program. Therefore, these kind of restrictions should be considered advisory at best (and rein- forced by policy). In general, if a user has sudo ALL there is nothing to prevent them from creating their own program that gives them a root shell (or making their own copy of a shell) regardless of any `!' elements in the user specifi- cation. Security implications of fast_glob If the fast_glob option is in use, it is not possible to reliably negate commands where the path name includes globbing (aka wildcard) characters. This is because the C library's fnmatch(3) function cannot resolve rela- tive paths. While this is typically only an inconvenience for rules that grant privileges, it can result in a security issue for rules that sub- tract or revoke privileges. For example, given the following sudoers file entry: john ALL = /usr/bin/passwd [a-zA-Z0-9]*, /usr/bin/chsh [a-zA-Z0-9]*,\ /usr/bin/chfn [a-zA-Z0-9]*, !/usr/bin/* root User john can still run `/usr/bin/passwd root' if fast_glob is enabled by changing to /usr/bin and running `./passwd root' instead. Another potential issue is that when sudo executes the command, it must use the command or path specified by the user instead of a path listed in the sudoers file. This may lead to a time of check versus time of use race condition. Wildcards in command arguments Command line arguments are matched as a single, concatenated string. This mean a wildcard character such as `?' or `*' will match across word boundaries, which may be unexpected. For example, while a sudoers entry like: %operator ALL = /bin/cat /var/log/messages* will allow command like: $ sudo cat /var/log/messages.1 It will also allow: $ sudo cat /var/log/messages /etc/shadow which is probably not what was intended. A safer alternative is to use a regular expression for matching command line arguments. The above exam- ple can be rewritten as a regular expression: %operator ALL = /bin/cat ^/var/log/messages[^[:space:]]*$ The regular expression will only match a single file with a name that be- gins with /var/log/messages and does not include any white space in the name. It is often better to do command line processing outside of the sudoers file in a scripting language for anything non-trivial. Regular expressions in command names Using a regular expression to match a command name has the same security implications as using the fast_glob option: o It is not possible to reliably negate commands when the path name is a regular expression. o When sudo executes the command, it must use the command or path speci- fied by the user instead of a path listed in the sudoers file. This may lead to a time of check versus time of use race condition. These issues do not apply to rules where only the command line options are matched using a regular expression. Preventing shell escapes Once sudo executes a program, that program is free to do whatever it pleases, including run other programs. This can be a security issue since it is not uncommon for a program to allow shell escapes, which lets a user bypass sudo's access control and logging. Common programs that permit shell escapes include shells (obviously), editors, paginators, mail, and terminal programs. There are four basic approaches to this problem: restrict Avoid giving users access to commands that allow the user to run arbitrary commands. Many editors have a restricted mode where shell escapes are disabled, though sudoedit is a better solution to running editors via sudo. Due to the large number of programs that offer shell escapes, restricting users to the set of programs that do not is often unworkable. intercept On most systems, sudo's intercept functionality can be used to transparently intercept an attempt to run a new command, allow or deny it based on sudoers rules, and log the result. For ex- ample, this can be used to restrict the commands run from within a privileged shell or editor. There are two underlying mechanisms that may be used to imple- ment intercept mode: dso and trace. The intercept_type setting can be used to select between them. The first mechanism, dso, overrides the standard C library functions that are used to execute a command. It does this by setting an environment variable (usually LD_PRELOAD) to the path of a dynamic shared object, or shared library, containing custom versions of the execve(2), execl(3), execle(3), execlp(3), execv(3), execvp(3), execvpe(3), and system(3) li- brary functions that connect back to sudo for a policy deci- sion. Note, however, that this applies only to dynamically- linked executables. It is not possible to intercept commands for statically-linked executables or executables that run under binary emulation this way. Because most dynamic loaders ignore LD_PRELOAD (or the equivalent) when running set-user-ID and set-group-ID programs, sudoers will not permit such programs to be run in intercept mode by default. The dso mechanism is in- compatible with sudo's SELinux RBAC support (but see below). SELinux disables LD_PRELOAD by default and interferes with file descriptor inheritance, which sudo relies on. The second mechanism, trace, is available on Linux systems that support seccomp(2) filtering. It uses ptrace(2) and seccomp(2) to intercept the execve(2) system call instead of pre-loading a dynamic shared object. Both static and dynamic executables are supported and it is compatible with sudo's SELinux RBAC mode. Functions utilizing the execveat(2) system call, such as fexecve(3), are not currently intercepted. The intercept feature is known to work on Solaris, *BSD, Linux, macOS, HP-UX 11.x and AIX 5.3 and above. It should be sup- ported on most operating systems that support the LD_PRELOAD environment variable or an equivalent. It is not possible to intercept shell built-in commands or restrict the ability to read or write sensitive files from within a shell. To enable intercept mode on a per-command basis, use the INTERCEPT tag as documented in the User Specification section above. Here is that example again: chuck research = INTERCEPT: ALL This allows user chuck to run any command on the machine "research" in intercept mode. Any commands run via shell es- capes will be validated and logged by sudo. If you are unsure whether or not your system is capable of supporting intercept, you can always just try it out and check whether or not exter- nal commands run via a shell are logged when intercept is en- abled. There is an inherent race condition between when a command is checked against sudoers rules and when it is actually executed. If a user is allowed to run arbitrary commands, they may be able to change the execve(2) arguments in the program after the sudoers policy check has completed but before the new command is executed. Starting with version 1.9.12, the trace method will verify that the command and its arguments have not changed after execve(2) has completed but before execution of the new program has had a chance to run. This is not the case with the dso method. See the description of the intercept_verify set- ting for more information. log There are two separate but related ways to log additional com- mands. The first is to enable I/O logging using the log_output flag. This will log the command's output but will not create an event log entry when the additional command is run. The second is to enable the log_subcmds flag in sudoers which will create an event log entry every time a new command is run. If I/O logging is also enabled, the log entry will include a time offset into the I/O log to indicate when the command was run. This offset can be passed to the sudoreplay(8) utility to re- play the I/O log at the exact moment when the command was run. The log_subcmds flag uses the same mechanism as intercept (see above) and has the same limitations. noexec sudo's noexec functionality can be used to prevent a program run by sudo from executing any other programs. On most sys- tems, it uses the same LD_PRELOAD mechanism as intercept (see above) and thus the same caveats apply. The noexec functional- ity is capable of blocking execution of commands run via the execve(2), execl(3), execle(3), execlp(3), exect(3), execv(3), execveat(3), execvP(3), execvp(3), execvpe(3), fexecve(3), popen(3), posix_spawn(3), posix_spawnp(3), system(3), and wordexp(3) functions. On Linux, a seccomp(2) filter is used to implement noexec. On Solaris 10 and higher, noexec uses So- laris privileges instead of the LD_PRELOAD environment vari- able. To enable noexec for a command, use the NOEXEC tag as docu- mented in the User Specification section above. Here is that example again: aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi This allows user aaron to run /usr/bin/more and /usr/bin/vi with noexec enabled. This will prevent those two commands from executing other commands (such as a shell). If you are unsure whether or not your system is capable of supporting noexec you can always just try it out and check whether shell escapes work when noexec is enabled. Restricting shell escapes is not a panacea. Programs running as root are still capable of many potentially hazardous operations (such as changing or overwriting files) that could lead to unintended privilege escalation. In the specific case of an editor, a safer approach is to give the user permission to run sudoedit (see below). Secure editing The sudoers plugin includes sudoedit support which allows users to se- curely edit files with the editor of their choice. As sudoedit is a built-in command, it must be specified in the sudoers file without a leading path. However, it may take command line arguments just as a nor- mal command does. Wildcards used in sudoedit command line arguments are expected to be path names, so a forward slash (`/') will not be matched by a wildcard. Unlike other sudo commands, the editor is run with the permissions of the invoking user and with the environment unmodified. More information may be found in the description of the -e option in sudo(8). For example, to allow user operator to edit the "message of the day" file on any machine: operator ALL = sudoedit /etc/motd The operator user then runs sudoedit as follows: $ sudoedit /etc/motd The editor will run as the operator user, not root, on a temporary copy of /etc/motd. After the file has been edited, /etc/motd will be updated with the contents of the temporary copy. Users should never be granted sudoedit permission to edit a file that re- sides in a directory the user has write access to, either directly or via a wildcard. If the user has write access to the directory it is possible to replace the legitimate file with a link to another file, allowing the editing of arbitrary files. To prevent this, starting with version 1.8.16, symbolic links will not be followed in writable directories and sudoedit will refuse to edit a file located in a writable directory un- less the sudoedit_checkdir option has been disabled or the invoking user is root. Additionally, in version 1.8.15 and higher, sudoedit will refuse to open a symbolic link unless either the sudoedit_follow option is enabled or the sudoedit command is prefixed with the FOLLOW tag in the sudoers file. Time stamp file checks sudoers will check the ownership of its time stamp directory (/var/run/sudo/ts by default) and ignore the directory's contents if it is not owned by root or if it is writable by a user other than root. Older versions of sudo stored time stamp files in /tmp; this is no longer recommended as it may be possible for a user to create the time stamp themselves on systems that allow unprivileged users to change the owner- ship of files they create. While the time stamp directory should be cleared at reboot time, not all systems contain a /run or /var/run directory. To avoid potential prob- lems, sudoers will ignore time stamp files that date from before the ma- chine booted on systems where the boot time is available. Some systems with graphical desktop environments allow unprivileged users to change the system clock. Since sudoers relies on the system clock for time stamp validation, it may be possible on such systems for a user to run sudo for longer than timestamp_timeout by setting the clock back. To combat this, sudoers uses a monotonic clock (which never moves backwards) for its time stamps if the system supports it. sudoers will not honor time stamps set far in the future. Time stamps with a date greater than current_time + 2 * TIMEOUT will be ignored and sudoers will log and complain. If the timestamp_type option is set to "tty", the time stamp record in- cludes the device number of the terminal the user authenticated with. This provides per-terminal granularity but time stamp records may still outlive the user's session. Unless the timestamp_type option is set to "global", the time stamp record also includes the session ID of the process that last authenti- cated. This prevents processes in different terminal sessions from using the same time stamp record. On systems where a process's start time can be queried, the start time of the session leader is recorded in the time stamp record. If no terminal is present or the timestamp_type option is set to "ppid", the start time of the parent process is used instead. In most cases this will prevent a time stamp record from being re-used with- out the user entering a password when logging out and back in again. DEBUGGING Versions 1.8.4 and higher of the sudoers plugin support a flexible debug- ging framework that can help track down what the plugin is doing inter- nally if there is a problem. This can be configured in the sudo.conf(5) file. The sudoers plugin uses the same debug flag format as the sudo front-end: subsystem@priority. The priorities used by sudoers, in order of decreasing severity, are: crit, err, warn, notice, diag, info, trace, and debug. Each priority, when specified, also includes all priorities higher than it. For exam- ple, a priority of notice would include debug messages logged at notice and higher. The following subsystems are used by the sudoers plugin: alias User_Alias, Runas_Alias, Host_Alias and Cmnd_Alias processing all matches every subsystem audit BSM and Linux audit code auth user authentication defaults sudoers file Defaults settings env environment handling ldap LDAP-based sudoers logging logging support match matching of users, groups, hosts, and netgroups in the sudoers file netif network interface handling nss network service switch handling in sudoers parser sudoers file parsing perms permission setting plugin The equivalent of main for the plugin. pty pseudo-terminal related code rbtree redblack tree internals sssd SSSD-based sudoers util utility functions For example: Debug sudoers.so /var/log/sudoers_debug match@info,nss@info For more information, see the sudo.conf(5) manual. SEE ALSO ssh(1), su(1), fnmatch(3), glob(3), mktemp(3), strftime(3), sudo.conf(5), sudo_plugin(5), sudoers.ldap(5), sudoers_timestamp(5), sudo(8), visudo(8) AUTHORS Many people have worked on sudo over the years; this version consists of code written primarily by: Todd C. Miller See the CONTRIBUTORS.md file in the sudo distribution (https://www.sudo.ws/about/contributors/) for an exhaustive list of peo- ple who have contributed to sudo. CAVEATS The sudoers file should always be edited by the visudo utility which locks the file and checks for syntax errors. If sudoers contains syntax errors, sudo may refuse to run, which is a serious problem if sudo is your only method of obtaining superuser privileges. Recent versions of sudoers will attempt to recover after a syntax error by ignoring the rest of the line after encountering an error. Older versions of sudo will not run if sudoers contains a syntax error. When using netgroups of machines (as opposed to users), if you store fully qualified host name in the netgroup (as is usually the case), you either need to have the machine's host name be fully qualified as re- turned by the hostname command or use the fqdn option in sudoers. BUGS If you believe you have found a bug in sudo, you can submit a bug report at https://bugzilla.sudo.ws/ SUPPORT Limited free support is available via the sudo-users mailing list, see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives. DISCLAIMER sudo is provided "AS IS" and any express or implied warranties, includ- ing, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. See the LICENSE.md file distributed with sudo or https://www.sudo.ws/about/license/ for complete details. Sudo 1.9.12p2 October 20, 2022 Sudo 1.9.12p2
NAME | DESCRIPTION | SUDOERS FILE FORMAT | SUDOERS OPTIONS | GROUP PROVIDER PLUGINS | EVENT LOGGING | I/O LOGGING | FILES | EXAMPLES | SECURITY NOTES | DEBUGGING | SEE ALSO | AUTHORS | CAVEATS | BUGS | SUPPORT | DISCLAIMER
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sudoers&sektion=5&manpath=FreeBSD+13.1-RELEASE+and+Ports>