FreeBSD Manual Pages
TOP(1) General Commands Manual TOP(1) NAME top -- display and update information about the top cpu processes SYNOPSIS top [-abCHIijnPqSTtuvwz] [-d count] [-J jail] [-m cpu | io] [-o field] [-p pid] [-s time] [-U username] [number] DESCRIPTION top displays the top processes on the system and periodically updates this information. If standard output is an intelligent terminal (see below) then as many processes as will fit on the terminal screen are displayed by default. Otherwise, a good number of them are shown (around 20). Raw cpu percentage is used to rank the processes. If number is given, then the top number processes will be displayed instead of the default. top makes a distinction between terminals that support advanced capabili- ties and those that do not. This distinction affects the choice of de- faults for certain options. In the remainder of this document, an "intelligent" terminal is one that supports cursor addressing, clear screen, and clear to end of line. Conversely, a "dumb" terminal is one that does not support such features. If the output of top is redirected to a file, it acts as if it were being run on a dumb terminal. The options are as follows: -a Display command names derived from the argv[] vector, rather than real executable name. It it useful when you want to watch applica- tions, that puts their status information there. If the real name differs from argv[0], it will be displayed in parenthesis. Non- printable characters in the command line are encoded in C-style backslash sequences or a three digit octal sequences. -b Use "batch" mode. In this mode, all input from the terminal is ig- nored. Interrupt characters (such as ^C and ^\) still have an ef- fect. This is the default on a dumb terminal, or when the output is not a terminal. -C Toggle CPU display mode. By default top displays the weighted CPU percentage in the WCPU column (this is the same value that ps(1) displays as CPU). Each time -C flag is passed it toggles between "raw cpu" mode and "weighted cpu" mode, showing the "CPU" or the "WCPU" column respectively. -d count Show only count displays, then exit. A display is considered to be one update of the screen. The default is 1 for dumb terminals. Note that for count = 1 no information is available about the per- centage of time spent by the CPU in every state. -H Display each thread for a multithreaded process individually. By default a single summary line is displayed for each process. -I Do not display idle processes. By default, top displays both ac- tive and idle processes. -i Use "interactive" mode. In this mode, any input is immediately read for processing. See the section on "Interactive Mode" for an explanation of which keys perform what functions. After the com- mand is processed, the screen will immediately be updated, even if the command was not understood. This mode is the default when standard output is an intelligent terminal. -J jail Show only those processes owned by jail. This may be either the jid or name of the jail. Use 0 to limit to host processes. Using this option implies -j. -j Display the jail(8) ID. -m mode Display statistics in the specified mode. Available modes are cpu and io. Default is cpu. -n Use "non-interactive" mode. This is identical to "batch" mode. -o field Sort the process display area on the specified field. The field name is the name of the column as seen in the output, but in lower case: "cpu", "size", "res", "time", "pri", "threads", "total", "read", "write", "fault", "vcsw", "ivcsw", "jid", "swap", or "pid". -P Display per-cpu CPU usage statistics. -p pid Show only the process pid. -q Renice top to -20 so that it will run faster. This can be used when the system is being very sluggish to improve the possibility of discovering the problem. This option can only be used by root. -S Show system processes in the display. Normally, system processes such as the pager and the swapper are not shown. This option makes them visible. -s time Set the delay between screen updates to time seconds, which may be fractional. The default delay between updates is 2 seconds. -T Toggle displaying thread ID (tid) instead of process id (pid). -t Do not display the top process itself. -U username Show only those processes owned by username. This option currently only accepts usernames and will not understand uid numbers. -u Do not map uid numbers to usernames. Normally, top will read as much of the file /etc/passwd as is necessary to map all the user id numbers it encounters into login names. This option disables all that, while possibly decreasing execution time. The uid numbers are displayed instead of the names. -v Write version number information to stderr then exit immediately. -w Display approximate swap usage for each process. -z Do not display the system idle process. Both count and number fields can be specified as "infinite", indicating that they can stretch as far as possible. This is accomplished by using any proper prefix of the keywords "infinity", "maximum", or "all". Boolean flags are toggles. A second specification of any of these options will negate the first. INTERACTIVE MODE When top is running in "interactive mode", it reads commands from the ter- minal and acts upon them accordingly. In this mode, the terminal is put in "CBREAK", so that a character will be processed as soon as it is typed. Almost always, a key will be pressed when top is between displays; that is, while it is waiting for time seconds to elapse. If this is the case, the command will be processed and the display will be updated immediately thereafter (reflecting any changes that the command may have specified). This happens even if the command was incorrect. If a key is pressed while top is in the middle of updating the display, it will finish the update and then process the command. Some commands require additional information, and the user will be prompted accordingly. While typing this information in, the user's erase and kill keys (as set up by the command stty(1)) are recognized, and a newline terminates the input. The bindings are as follows: space Update the display. / Filter by command name. Prompt for string or `+' to show all processes. a Toggle display of process titles. C Toggle display of raw or weighted CPU percentage. d Change the number of remaining displays to show before exit. Prompt for new number. e Display a list of system errors (if any) generated by the last com- mand. H Toggle display of threads. h or ? Display a summary of the commands (help screen) and version infor- mation. i or I Toggle display of idle processes. J Filter processes owned by a specific jail. Prompt for jail name or `+' for all processes belonging to all jails and the host. This will also enable the display of JID. j Toggle display of jail(8) ID. k Send a signal (SIGKILL by default) to a list of processes. This acts similarly to the command kill(1). m Toggle the display between 'cpu' and 'io' modes. n or # Change the number of processes to display. Prompt for new number. o Change the order in which the display is sorted. The sort key names include "cpu", "res", "size", and "time." The default is cpu. P Toggle display of per-CPU statistics. p Filter by exact process ID. Prompt for PID or `+' to show all processes. q Quit top. r Change the priority (the "nice") of a list of processes. This acts similarly to renice(8). S Toggle the display of system processes. s Change the number of seconds to delay between displays. Prompt for new number. T Toggle display between thread ID and process ID. t Toggle display of the top process. u Filter by exact process owner username. Prompt for username or `-'/`+' for all users. Usernames can be added to and removed from the set by prepending them with `+' and `-', respectively. w Toggle display of swap usage. z Toggle display of the system idle process. THE DISPLAY The top few lines of the display show general information about the state of the system, including the last process id assigned to a process (on most systems), the three load averages, the current time, the number of existing processes, the number of processes in each state (sleeping, running, start- ing, zombies, and stopped), and a percentage of time spent in each of the processor states (user, nice, system, and idle). It also includes informa- tion about physical and virtual memory allocation. The remainder of the screen displays information about individual processes. This display is similar in spirit to ps(1) but it is not ex- actly the same. PID is the process id, JID, when displayed, is the jail(8) ID corresponding to the process, USERNAME is the name of the process's owner (if -u is specified, a UID column will be substituted for USERNAME), THR is the thread count, showing the number of threads a process has, PRI is the current priority of the process, NICE is the nice(1) amount, SIZE is the total size of the process (text, data, and stack), RES is the current amount of resident memory, SWAP is the approximate amount of swap, if en- abled (SIZE, RES and SWAP are given in kilobytes), STATE is the current state (one of "START", "RUN" (shown as "CPUn" on SMP systems), "SLEEP", "STOP", "ZOMB", "WAIT", "LOCK", or the event on which the process waits), C is the processor number on which the process is executing (visible only on SMP systems), TIME is the number of system and user cpu seconds that the process has used, WCPU, when displayed, is the weighted cpu percentage (this is the same value that ps(1) displays as CPU), CPU is the raw per- centage and is the field that is sorted to determine the order of the processes, and COMMAND is the name of the command that the process is cur- rently running (if the process is swapped out, this column is marked "<swapped>"). If a process is in the "SLEEP" or "LOCK" state, the state column will re- port the name of the event or lock on which the process is waiting. Lock names are prefixed with an asterisk "*" while sleep events are not. DESCRIPTION OF MEMORY Mem: 61M Active, 86M Inact, 368K Laundry, 22G Wired, 102G Free ARC: 15G Total, 9303M MFU, 6155M MRU, 1464K Anon, 98M Header, 35M Other 15G Compressed, 27G Uncompressed, 1.75:1 Ratio, 174M Overhead Swap: 4096M Total, 532M Free, 13% Inuse, 80K In, 104K Out Physical Memory Stats Active number of bytes active Inact number of clean bytes inactive Laundry number of dirty bytes queued for laundering Wired number of bytes wired down, including IO-level cached file data pages Buf number of bytes used for IO-level disk caching Free number of bytes free ZFS ARC Stats These stats are only displayed when the ARC is in use. Total number of wired bytes used for the ZFS ARC MRU number of ARC bytes holding most recently used data MFU number of ARC bytes holding most frequently used data Anon number of ARC bytes holding in flight data Header number of ARC bytes holding headers Other miscellaneous ARC bytes Compressed bytes of memory used by ARC caches Uncompressed bytes of data stored in ARC caches before compression Ratio compression ratio of data cached in the ARC Swap Stats Total total available swap usage Free total free swap usage Inuse swap usage In bytes paged in from swap devices (last interval) Out bytes paged out to swap devices (last interval) ENVIRONMENT TOP Default set of arguments to top. LC_CTYPE The locale to use when displaying the argv vector when -a flag is specified. SEE ALSO kill(1), ps(1), stty(1), getrusage(2), humanize_number(3), mem(4), renice(8) HISTORY top first appeared in FreeBSD 2.2.2. AUTHORS William LeFebvre, EECS Department, Northwestern University BUGS The command name for swapped processes should be tracked down, but this would make the program run slower. As with ps(1), things can change while top is collecting information for an update. The picture it gives is only a close approximation to reality. FreeBSD ports 15.quarterly June 9, 2025 TOP(1)
NAME | SYNOPSIS | DESCRIPTION | INTERACTIVE MODE | THE DISPLAY | DESCRIPTION OF MEMORY | ENVIRONMENT | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=top&sektion=1&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>