Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
TRM(4)                 FreeBSD Kernel Interfaces Manual                 TRM(4)

NAME
     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device scbus
           device trm

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           trm_load="YES"

DESCRIPTION
     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-
     S1040 SCSI ASIC.

HARDWARE
     SCSI controllers supported by the trm driver include:

     o   Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI
         connector
     o   Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     o   Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin
         external SCSI connector
     o   Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     o   Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     o   Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host
     adapters, use the sym(4) driver.

SEE ALSO
     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS
     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen
     of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
     <cognet@FreeBSD.org>.

FreeBSD 6.2                    December 8, 2002                    FreeBSD 6.2
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=trm&sektion=4&manpath=FreeBSD+6.2-RELEASE>

home | help