FreeBSD Manual Pages
TUN(4) FreeBSD Kernel Interfaces Manual TUN(4) NAME tun -- network tunnel pseudo-device SYNOPSIS pseudo-device tun #include <sys/types.h> #include <net/if_tun.h> DESCRIPTION The tun driver provides a network interface pseudo-device. Packets sent to this interface can be read by a userland process and processed as de- sired. Packets written by the userland process are injected back into the kernel networking subsystem. A tun interface can be created at runtime using the ifconfig tunN create command or by opening the character special device /dev/tunN. By default tun operates as a point-to-point interface. Each device has an exclusive open property: it cannot be opened if it is already open and in use by another process. Each read returns at most one packet; if insufficient buffer space is provided, the packet is trun- cated. Each write supplies exactly one packet. Each packet read or written is prefixed with a tunnel header consisting of a 4-byte network byte order integer containing the address family. On the last close of the device, all queued packets are discarded. If the device was created by opening /dev/tunN, it will be automatically destroyed. Devices cre- ated via ifconfig(8) are only marked as not running and traffic will be dropped returning EHOSTDOWN. Writes never block. If the protocol queue is full, the packet is dropped, a "collision" is counted, and ENOBUFS is returned. In addition to the usual network interface ioctl commands described in netintro(4), the following special commands defined in <net/if_tun.h> are supported: TUNGIFINFO struct tuninfo * TUNSIFINFO struct tuninfo * Get or set the interface characteristics. /* iface info */ struct tuninfo { u_int mtu; u_short type; u_short flags; u_int baudrate; }; flags sets the interface flags, and can include one or more of IFF_UP, IFF_POINTOPOINT, IFF_MULTICAST, IFF_BROADCAST. Flags given will be set; flags omitted will be cleared; flags not in this list will not be changed even when given. Flags default to IFF_POINTOPOINT. It is an error to set both IFF_POINTOPOINT and IFF_BROADCAST. type defaults to IFT_TUNNEL. This sets the in- terface media address header type. TUNSIFMODE int * Set just the interface flags. The same restrictions as for TUNSIFINFO apply. The generic ioctls FIONREAD, FIONBIO, FIOASYNC, FIOSETOWN, FIOGETOWN are supported by tun. FILES /dev/tun* ERRORS If open fails, errno(2) may be set to one of: [ENXIO] Not that many devices configured. [EBUSY] Device was already open. If a write(2) call fails, errno(2) is set to one of: [EMSGSIZE] The packet supplied was too small or too large. The maximum sized packet allowed is currently 16384 bytes. [ENOBUFS] There were no mbufs, or the queue for the outgoing protocol is full. [EAFNOSUPPORT] The address family specified in the tunnel header was not recognized. Ioctl commands may fail with: [EINVAL] Attempt to set both IFF_POINTOPOINT and IFF_BROADCAST with TUNSIFMODE or using SIOCGIFADDR or SIOCSIFADDR. [ENOTTY] Unrecognized ioctl command. A read(2) call may fail because of: [EHOSTDOWN] The device is not ready. The device must have an inet(4) interface address assigned to it, such as via SIOCSIFADDR. [EWOULDBLOCK] Non-blocking I/O was selected and no packets were available. An attempt to send a packet out via the interface may fail with: [EHOSTDOWN] The device is not ready. The device must have an inet(4) interface address assigned to it, such as via SIOCSIFADDR. SEE ALSO ioctl(2), inet(4), intro(4), netintro(4), hostname.if(5), ifconfig(8), netstart(8) FreeBSD 13.0 January 9, 2020 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | FILES | ERRORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=tun&sektion=4&manpath=OpenBSD+6.9>