FreeBSD Manual Pages
URE(4) FreeBSD Kernel Interfaces Manual URE(4) NAME ure -- RealTek RTL8152/RTL8153 USB to Ethernet controller driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device uhci device ohci device usb device miibus device uether device ure Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_ure_load="YES" DESCRIPTION The ure driver provides support for USB Ethernet adapters based on the RealTek RealTek RTL8152 and RTL8153 USB Ethernet controllers. NICs based on the RTL8152 are capable of 10 and 100Mbps speeds. NICs based on the RTL8153 are capable of 10, 100 and 1000Mbps operation. The ure driver supports the following media types: autoselect Enable auto selection of the media type and options. The user can manually override the auto selected mode by adding media options to the /etc/rc.conf file. 10baseT/UTP Set 10Mbps operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes. 100baseTX Set 100Mbps (Fast Ethernet) operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes. 1000baseTX Set 1000baseTX operation over twisted pair. The RealTek gigE chips support 1000Mbps in full-duplex mode only. The ure driver supports the following media options: full-duplex Force full duplex operation. half-duplex Force half duplex operation. For more information on configuring this device, see ifconfig(8). DIAGNOSTICS ure%d: watchdog timeout A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired. SEE ALSO arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8) AUTHORS The ure driver was written by Kevin Lo <kevlo@FreeBSD.org>. FreeBSD 13.0 October 31, 2016 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ure&manpath=FreeBSD+13.1-RELEASE+and+Ports>