FreeBSD Manual Pages
VIRTIO_BLK(4) FreeBSD Kernel Interfaces Manual VIRTIO_BLK(4) NAME virtio_blk -- VirtIO Block driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device virtio_blk Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): virtio_blk_load="YES" DESCRIPTION The virtio_blk device driver provides support for VirtIO block devices. LOADER TUNABLES Tunables can be set at the loader(8) prompt before booting the kernel or stored in loader.conf(5). hw.vtblk.no_ident hw.vtblk.X.no_ident These tunables disable retrieving the device identification string from the hypervisor either globally or per-device. The default value is 0. hw.vtblk.writecache_mode hw.vtblk.X.writecache_mode These tunables determine the write cache mode globally or per-de- vice. The mode can changed only if the ConfigWCE feature is ne- gotiated. Set to 0 for writethrough mode, 1 for writeback mode, and -1 to leave it as-is. The default value is to leave as-is. SYSCTL VARIABLES The following variables are available as sysctl(8) variables. dev.vtblk.X.writecache_mode The write cache mode of the device can be either writethrough (0) or writeback (1). If the ConfigWCE feature is negotiated, the write cache mode can be toggled between writethrough and write- back. SEE ALSO virtio(4) HISTORY The virtio_blk driver was written by Bryan Venteicher <bryanv@FreeBSD.org>. It first appeared in FreeBSD 9.0. FreeBSD 13.0 July 2, 2013 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | LOADER TUNABLES | SYSCTL VARIABLES | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=virtio_blk&sektion=4&manpath=FreeBSD+13.2-RELEASE+and+Ports>