Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
XE(4)			 BSD Kernel Interfaces Manual			 XE(4)

NAME
     xe	-- Xircom PCMCIA Ethernet device driver

SYNOPSIS
     To	compile	this driver into the kernel, place the following line in your
     kernel configuration file:

	   device xe

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   if_xe_load="YES"

DESCRIPTION
     The xe driver supports PCMCIA Ethernet adapters based on Xircom CE2- and
     CE3-class hardware.  This includes	devices	made by	Xircom along with var-
     ious OEM manufacturers.

     Please note that the xe driver only supports PCMCIA cards and their Eth-
     ernet functions.  xe does not support the on-board	modem device located
     on	some version of	the Ethernet/modem combo cards.	 In particular,	Xircom
     RealPort2 cards are not supported by this driver.

     The xe driver supports the	following media	types:

     autoselect	 Enable	autoselection of media type and	options.

     10Base2/BNC
		 Select	10Mbps operation on a BNC coaxial connector.

     10BaseT/UTP
		 Select	10Mbps operation on a RJ-45 connector.

     100BaseTX	 Select	100Mbps	operation.

     Note that 100BaseTX operation is not available on CE2-class cards,	while
     the 10Base2/BNC mode is only available on CE2-class cards.	 Full-duplex
     operation is currently not	supported.  For	more information on configur-
     ing network interface devices, see	ifconfig(8).

HARDWARE
     The xe driver supports the	following cards:

     o	 Xircom	CreditCard Ethernet (PS-CE2-10)
     o	 Xircom	CreditCard Ethernet + Modem 28 (PS-CEM-28)
     o	 Xircom	CreditCard Ethernet + Modem 33 (CEM33)
     o	 Xircom	CreditCard 10/100 (CE3,	CE3B)
     o	 Xircom	CreditCard Ethernet 10/100 + Modem 56 (CEM56)
     o	 Xircom	RealPort Ethernet 10 (RE10)
     o	 Xircom	RealPort Ethernet 10/100 (RE100)
     o	 Xircom	RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)
     o	 Accton	Fast EtherCard-16 (EN2226)
     o	 Compaq	Microcom CPQ550	Ethernet/Modem PC Card
     o	 Compaq	Netelligent 10/100 PC Card (CPQ-10/100)
     o	 Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)
     o	 Intel EtherExpress Pro/100 LAN/Modem PC Card Adapter (Pro/100 M16B)

     Other similar devices using the same hardware may also be supported.

DIAGNOSTICS
     xe%d: Cannot allocate ioport
     xe%d: Cannot allocate irq	A fatal	initialization error occurred while
     attempting	to allocate system resources for the card.

     xe%d: Unable to fix your %s combo card  A fatal initialization error oc-
     curred while attempting to	attach an Ethernet/modem combo card.

     xe%d: watchdog timeout: resetting card  The card failed to	generate an
     interrupt acknowledging a transmitted packet.  May	indicate a PCMCIA con-
     figuration	problem.

     xe%d: no carrier  The card	has lost all contact with the network; this
     usually indicates a cable problem.

SEE ALSO
     pccard(4),	ifconfig(8)

HISTORY
     The xe driver first appeared in FreeBSD 3.3.

AUTHORS
     The xe device driver was written by Scott Mitchell	<rsm@FreeBSD.org>.
     This manual page was written by Scott Mitchell <rsm@FreeBSD.org>, and Tom
     Rhodes <trhodes@FreeBSD.org>.

BUGS
     Supported devices will fail to attach on some machines using the NEWCARD
     PC	Card framework.

     Automatic media selection is usually unreliable.

BSD				 July 16, 2005				   BSD
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=xe&sektion=4&manpath=FreeBSD+6.3-RELEASE>

home | help