FreeBSD Manual Pages
curs_util(3X) Library calls curs_util(3X) NAME delay_output, filter, flushinp, getwin, key_name, keyname, nofilter, putwin, unctrl, use_env, use_tioctl, wunctrl - miscellaneous curses utility routines SYNOPSIS #include <curses.h> const char * unctrl(chtype ch); wchar_t * wunctrl(cchar_t * wch); const char * keyname(int c); const char * key_name(wchar_t wc); void filter(void); /* extension */ void nofilter(void); void use_env(bool bf); /* extension */ void use_tioctl(bool bf); int putwin(WINDOW * win, FILE * filep); WINDOW * getwin(FILE * filep); int delay_output(int ms); int flushinp(void); DESCRIPTION unctrl, wunctrl unctrl returns a null-terminated character string printably representing the curses character ch, often one that originated in keyboard input; see getch(3X). * Printable characters represent themselves as a one-character string. * Control characters are expressed in ^X notation, where X is the print- able symbol of the control code's value plus 32 in the ISO 646/"ASCII" character set. * DEL (character code 127) is represented as ^?. * A character code greater than 127 is represented in one of two ways. If the screen has not been initialized or is in meta mode (see meta(3X)), it is expressed in M-X notation, where X is the representa- tion of the code's value minus 128, as described above. If the screen is not in meta mode, the character code is assumed to represent itself. It nevertheless may not be printable; this is the case for character codes 128-159 in ISO 8859 encodings. ncurses's use_legacy_coding(3X) function configures unctrl's handling of these character codes. wunctrl returns a null-terminated wide-character string printably repre- senting the curses complex character wch. Both functions ignore the attributes and color pair selection of their ar- gument. keyname, key_name The keyname routine returns a character string corresponding to the key c. Key codes are different from character codes. * Key codes below 256 are characters. They are displayed using unctrl. * Values above 256 may be the codes for function keys. The function key name is displayed. * Otherwise (if there is no corresponding name and the key is not a char- acter) the function returns null, to denote an error. X/Open also lists an "UNKNOWN KEY" return value, which some implementations return rather than null. The corresponding key_name returns a multibyte character string correspond- ing to the wide-character value wc. The two functions (keyname and key_name) do not return the same set of strings: * keyname returns null where key_name would display a meta character. * key_name does not return the name of a function key. filter, nofilter The filter routine, if used, must be called before initscr or newterm are called. Calling filter causes these changes in initialization: * LINES is set to 1; * the capabilities clear, cud1, cud, cup, cuu1, cuu, vpa are disabled; * the capability ed is disabled if bce is set; * and the home string is set to the value of cr. The nofilter routine cancels the effect of a preceding filter call. That allows the caller to initialize a screen on a different device, using a different value of $TERM. The limitation arises because the filter routine modifies the in-memory copy of the terminal information. use_env The use_env routine, if used, should be called before initscr or newterm are called (because those compute the screen size). It modifies the way ncurses treats environment variables when determining the screen size. * Normally ncurses looks first at the terminal database for the screen size. If use_env was called with FALSE for parameter, it stops here unless use_tioctl was also called with TRUE for parameter. * Then it asks for the screen size via operating system calls. If suc- cessful, it overrides the values from the terminal database. * Finally (unless use_env was called with FALSE parameter), ncurses exam- ines the LINES or COLUMNS environment variables, using a value in those to override the results from the operating system or terminal database. curses also updates the screen size in response to SIGWINCH, unless overridden by the LINES or COLUMNS environment variables, use_tioctl The use_tioctl routine, if used, should be called before initscr or newterm are called (because those compute the screen size). After use_tioctl is called with TRUE as an argument, ncurses modifies the last step in its com- putation of screen size as follows: * checks whether the LINES and COLUMNS environment variables are set to a number greater than zero. * for each, ncurses updates the corresponding environment variable with the value that it has obtained via operating system call or from the terminal database. * ncurses re-fetches the value of the environment variables so that it is still the environment variables that set the screen size. The use_env and use_tioctl routines combine as follows. use_env use_tioctl Summary -------------------------------------------------------------------- TRUE FALSE ncurses uses operating system calls unless overridden by LINES or COLUMNS environment variables; default. TRUE TRUE ncurses updates LINES and COLUMNS based on operating system calls. FALSE TRUE ncurses ignores LINES and COLUMNS, using op- erating system calls to obtain size. putwin, getwin The putwin routine writes all data associated with window (or pad) win into the file to which filep points. This information can be later retrieved using the getwin function. The getwin routine reads window related data stored in the file by putwin. The routine then creates and initializes a new window using that data. It returns a pointer to the new window. There are a few caveats: * the data written is a copy of the WINDOW structure, and its associated character cells. The format differs between the wide-character (ncursesw) and non-wide (ncurses) libraries. You can transfer data be- tween the two, however. * the retrieved window is always created as a top-level window (or pad), rather than a subwindow. * the window's character cells contain the color pair value, but not the actual color numbers. If cells in the retrieved window use color pairs that have not been created in the application using init_pair, they will not be colored when the window is refreshed. delay_output The delay_output routine inserts an ms millisecond pause in output. Employ this function judiciously when terminal output uses padding, because ncurses transmits null characters (consuming CPU and I/O resources) instead of sleeping and requesting resumption from the operating system. Padding is used unless: * the terminal description has npc (no_pad_char) capability, or * the environment variable NCURSES_NO_PADDING is set. If padding is not in use, ncurses uses napms to perform the delay. If the value of ms exceeds 30,000 (thirty seconds), it is capped at that value. flushinp The flushinp routine throws away any typeahead that has been typed by the user and has not yet been read by the program. RETURN VALUE Except for flushinp, functions that return integers return ERR upon failure and OK upon success. Functions that return pointers return a null pointer on failure. In ncurses, * flushinp returns ERR if the terminal was not initialized, and * putwin returns ERR if its associated write(2) calls return ERR. NOTES wunctrl is part of ncurses's wide-character API, and is not available in its non-wide-character configuration. PORTABILITY X/Open Curses Issue 4 describes these functions. It specifies no error conditions for them. SVr4 describes a successful return value only as "an integer value other than ERR". filter The SVr4 documentation describes the action of filter only in the vaguest terms. The description here is adapted from X/Open Curses (which erro- neously fails to describe the disabling of cuu). delay_output padding The limitation to 30 seconds and the use of napms differ from other imple- mentations. * SVr4 curses does not delay if no padding character is available. * NetBSD curses uses napms when no padding character is available, but does not take timing into account when using the padding character. Neither limits the delay. keyname The keyname function may return the names of user-defined string capabili- ties that are defined in the terminfo entry via the -x option of tic. This implementation automatically assigns at run-time key codes to user-defined strings that begin with "k". The key codes start at KEY_MAX, but are not guaranteed to be the same value for different runs because user-defined codes are merged from all terminal descriptions that have been loaded. The use_extended_names(3X) function controls whether this data is loaded when the terminal description is read by the library. nofilter, use_tioctl The nofilter and use_tioctl routines are specific to ncurses. They were not supported on Version 7, BSD or System V implementations. It is recom- mended that any code depending on ncurses extensions be conditioned using NCURSES_VERSION. putwin/getwin file-format The putwin and getwin functions have several issues with portability: * The files written and read by these functions use an implementation- specific format. Although the format is an obvious target for stan- dardization, it has been overlooked. Interestingly enough, according to the copyright dates in Solaris source, the functions (along with scr_init, etc.) originated with the University of California, Berkeley (in 1982) and were later (in 1988) incorporated into SVr4. Oddly, there are no such functions in the 4.3BSD curses sources. * Most implementations simply dump the binary WINDOW structure to the file. These include SVr4 curses, NetBSD curses, and PDCurses, as well as older ncurses versions. This implementation (as well as xcurses, the X/Open variant of Solaris curses, dated 1995) uses textual dumps. The implementations that use binary dumps use block I/O (write(2) and read(2) functions). Those that use textual dumps use buffered I/O. A few applications may happen to write extra data in the file using these functions. Doing that can run into problems mixing block and buffered I/O. This implementation reduces the problem on writes by flushing the output. However, reading from a file written using mixed schemes may not be successful. unctrl, wunctrl X/Open Curses Issue 4 describes these functions. It specifies no error conditions for them. It states that unctrl and wunctrl will return a null pointer if unsuccessful. This implementation checks for three cases: * the parameter is a 7-bit US-ASCII code. This is the case that X/Open Curses documented. * the parameter is in the range 128-159, i.e., a C1 control code. If use_legacy_coding(3X) has been called with a 2 parameter, unctrl re- turns the parameter, i.e., a one-character string with the parameter as the first character. Otherwise, it returns "~@", "~A", etc., analogous to "^@", "^A", C0 controls. X/Open Curses does not document whether unctrl can be called before initializing curses. This implementation permits that, and returns the "~@", etc., values in that case. * parameter values outside the 0 to 255 range. unctrl returns a null pointer. The strings returned by unctrl in this implementation are determined at compile time, showing C1 controls from the upper-128 codes with a "~" pre- fix rather than "^". Other implementations have different conventions. For example, they may show both sets of control characters with "^", and strip the parameter to 7 bits. Or they may ignore C1 controls and treat all of the upper-128 codes as printable. This implementation uses 8 bits but does not modify the string to reflect locale. The use_legacy_coding(3X) function allows the caller to change the output of unctrl. Likewise, the meta(3X) function allows the caller to change the output of keyname, i.e., it determines whether to use the "M-" prefix for "meta" keys (codes in the range 128 to 255). Both use_legacy_coding(3X) and meta(3X) succeed only after curses is initialized. X/Open Curses does not document the treatment of codes 128 to 159. When treating them as "meta" keys (or if keyname is called before initializing curses), this implementation re- turns strings "M-^@", "M-^A", etc. X/Open Curses documents unctrl as declared in unctrl.h, which ncurses does. However, ncurses's curses.h includes unctrl.h, matching the behavior of SVr4 curses. Other implementations may not do that. use_env, use_tioctl If ncurses is configured to provide the sp-functions extension, the state of use_env and use_tioctl may be updated before creating each screen rather than once only (curs_sp_funcs(3X)). This feature of use_env is not pro- vided by other implementations of curses. HISTORY 4BSD (1980) introduced unctrl, defining it as a macro in unctrl.h. SVr2 (1984) added delay_output, flushinp, and keyname. SVr3 (1987) supplied filter. Later that year, SVr3.1 brought getwin and putwin, reading and writing window dumps with fread(3) and fwrite(3), re- spectively. SVr4 (1989) furnished use_env. X/Open Curses Issue 4 (1995) specified key_name and wunctrl. ncurses 5.6 (2006) added nofilter, and 6.0 (2015) use_tioctl. SEE ALSO curses(3X), curs_initscr(3X), curs_inopts(3X), curs_kernel(3X), curs_scr_dump(3X), curs_sp_funcs(3X), curs_variables(3X), legacy_coding(3X) ncurses 6.6 2025-11-11 curs_util(3X)
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | NOTES | PORTABILITY | HISTORY | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=curs_util&sektion=3&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>