FreeBSD Manual Pages
FSTAT(1) General Commands Manual FSTAT(1) NAME fstat -- identify active files SYNOPSIS fstat [-fmnsv] [-M core] [-N system] [-p pid] [-u user] [file ...] DESCRIPTION The fstat utility identifies open files. A file is considered open by a process if it was explicitly opened, is the working directory, root directory, jail root directory, active executable text, or kernel trace file for that process. If no options are specified, fstat reports on all open files in the system for processes the user has access to. The following options are available: -f Restrict examination to files open in the same file systems as the named file arguments, or to the file system contain- ing the current directory if there are no additional file- name arguments. For example, to find all files open in the file system where the directory /usr/src resides, type `fstat -f /usr/src'. -M core Extract values associated with the name list from the speci- fied core instead of the default /dev/kmem. -m Include memory-mapped files in the listing; normally these are excluded due to the extra processing required. -N system Extract the name list from the specified system instead of the default, which is the kernel image the system has booted from. -n Numerical format. Print the device number (maj,min) of the file system the file resides in rather than the mount point name; for special files, print the device number that the special device refers to rather than the filename in /dev; and print the mode of the file in octal instead of symbolic form. -p pid Report all files open by the specified process. -s Print socket endpoint information. -u user Report all files open by the specified user. -v Verbose mode. Print error messages upon failures to locate particular system data structures rather than silently ig- noring them. Most of these data structures are dynamically created or deleted and it is possible for them to disappear while fstat is running. This is normal and unavoidable since the rest of the system is running while fstat itself is running. file ... Restrict reports to the specified files. The following fields are printed: USER The username of the owner of the process (effective uid). CMD The command name of the process. PID The process id. FD The file number in the per-process open file table or one of the following special names: jail jail root directory mmap memory-mapped file root root inode text executable text inode tr kernel trace file wd current working directory If the file number is followed by an asterisk (`*'), the file is not an inode, but rather a socket, FIFO, or there is an error. In this case the remainder of the line does not correspond to the remaining headers-- the format of the line is described later under "SOCKETS". MOUNT If the -n flag was not specified, this header is present and is the pathname that the file system the file resides in is mounted on. DEV If the -n flag is specified, this header is present and is the number of the device that this file resides in. INUM The inode number of the file. MODE The mode of the file. If the -n flag is not specified, the mode is printed using a symbolic format (see strmode(3)); otherwise, the mode is printed as an octal number. SZ|DV If the file is a semaphore, prints the current value of the sem- aphore. If the file is not a character or block special, prints the size of the file in bytes. Otherwise, if the -n flag is not specified, prints the name of the special file as located in /dev. If that cannot be located, or the -n flag is specified, prints the major/minor device number that the special device refers to. R/W This column describes the access mode that the file allows. The letter `r' indicates open for reading; the letter `w' indicates open for writing. This field is useful when trying to find the processes that are preventing a file system from being down graded to read-only. NAME If filename arguments are specified and the -f flag is not, then this field is present and is the name associated with the given file. Normally the name cannot be determined since there is no mapping from an open file back to the directory entry that was used to open that file. Also, since different directory entries may reference the same file (via ln(1)), the name printed may not be the actual name that the process originally used to open that file. SOCKETS The formatting of open sockets depends on the protocol domain. In all cases the first field is the domain name, the second field is the socket type (stream, dgram, etc.), and the third is the socket flags field (in hex). The remaining fields are protocol dependent. For TCP, it is the address of the tcpcb, and for UDP, the inpcb (socket pcb). For UNIX-domain sockets, its the address of the socket pcb and the ad- dress of the connected pcb (if connected). Otherwise the protocol num- ber and address of the socket itself are printed. For example, the addresses mentioned above are the addresses which the `netstat -A' command would print for TCP, UDP, and UNIX-domain. Note that since pipes are implemented using sockets, a pipe appears as a connected UNIX-domain stream socket. A unidirectional UNIX-domain socket indicates the direction of flow with an arrow (`<-' or `->'), and a full duplex socket shows a double arrow (`<->'). When the -s flag is used, socket endpoint information is shown after the address of the socket. For internet sockets the local and remote addresses are shown, separated with a double arrow (`<->'). For UNIX/local sockets either the local or remote address is shown, depend- ing on which one is available. EXIT STATUS The fstat utility exits 0 on success, and >0 if an error occurs. EXAMPLES Show all open files except those opened by fstat itself: $ fstat | awk '$2 != "fstat"' USER CMD PID FD MOUNT INUM MODE SZ|DV R/W alice bash 469 text /usr/local 143355 -rwxr-xr-x 1166448 r alice bash 469 ctty /dev 346 crw--w---- pts/81 rw ... Report all files opened by the current shell in the same file system as /usr/local including memory-mapped files: $ fstat -m -p $$ -f /usr/local USER CMD PID FD MOUNT INUM MODE SZ|DV R/W bob bash 469 text /usr/local 143355 -rwxr-xr-x 1166448 r bob bash 469 mmap /usr/local 143355 -rwxr-xr-x 1166448 r ... Requesting information about a file that is not opened results in just a header line instead of an error: $ fstat /etc/rc.conf USER CMD PID FD MOUNT INUM MODE SZ|DV R/W NAME All parameters after -f will be interpreted as files, so the following will not work as expected: $ fstat -f /usr/local -m -p $$ fstat: -m: No such file or directory fstat: -p: No such file or directory fstat: 469: No such file or directory ... Show number of pipes opened by firefox processes: $ fstat | awk '$2=="firefox" && $5=="pipe"' | wc -l Show processes belonging to user "bob" whose standard error descriptor is opened in ttyv0: $ fstat -u bob | awk '$4 == 2 && $8 == "ttyv0"' bob firefox 77842 2 /dev 103 crw------- ttyv0 rw bob xinit 1194 2 /dev 103 crw------- ttyv0 rw ... Show opened TCP sockets. This output resembles the one produced by `netstat -A -p tcp' : $ fstat | awk '$7 == "tcp"' alice firefox 77991 32* internet stream tcp fffff800b7f147a0 alice firefox 77991 137* internet stream tcp fffff800b7f12b70 ... Show a list of processes with files opened in the current directory mimicking the output of fuser(1) : $ fstat . | awk 'NR > 1 {printf "%d%s(%s) ", $3, $4, $1;}' 2133wd(alice) 2132wd(alice) 1991wd(alice) Create a list of processes sorted by number of opened files in descend- ing order: $ fstat | awk 'NR > 1 {print $2;}' | sort | uniq -c | sort -r 728 firefox 23 bash 14 sort 8 fstat 7 awk SEE ALSO fuser(1), netstat(1), nfsstat(1), procstat(1), ps(1), sockstat(1), systat(1), tcp(4), unix(4), iostat(8), pstat(8), vmstat(8) HISTORY The fstat command appeared in 4.3BSD-Tahoe. BUGS Since fstat takes a snapshot of the system, it is only correct for a very short period of time. FreeBSD 13.2 November 19, 2020 FSTAT(1)
NAME | SYNOPSIS | DESCRIPTION | SOCKETS | EXIT STATUS | EXAMPLES | SEE ALSO | HISTORY | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fstat&sektion=1&manpath=FreeBSD+14.2-RELEASE+and+Ports>