FreeBSD Manual Pages
IXGBE(4) Kernel Interfaces Manual IXGBE(4) NAME ixgbe -- Intel(R) 10Gb Ethernet driver for the FreeBSD operating system SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device iflib device ixgbe Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_ixgbe_load="YES" DESCRIPTION The ixgbe driver provides support for PCI 10Gb Ethernet adapters based on the Intel 82598EB Intel(R) Network Connections. The driver supports Jumbo Frames, MSIX, TSO, and RSS. For questions related to hardware requirements, refer to the documenta- tion supplied with your Intel 10GbE adapter. All hardware requirements listed apply to use with FreeBSD. Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to receive and transmit Jumbo Frames. The maxi- mum MTU size for Jumbo Frames is 9710. This driver version supports VLANs. For information on enabling VLANs, see ifconfig(8). HARDWARE The ixgbe driver supports the following cards: • Intel(R) 10 Gigabit XF SR/AF Dual Port Server Adapter • Intel(R) 10 Gigabit XF SR/LR Server Adapter • Intel(R) 82598EB 10 Gigabit AF Network Connection • Intel(R) 82598EB 10 Gigabit AT CX4 Network Connection DIAGNOSTICS ixgbe%d: Unable to allocate bus resource: memory A fatal initializa- tion error has occurred. ixgbe%d: Unable to allocate bus resource: interrupt A fatal initial- ization error has occurred. ixgbe%d: watchdog timeout -- resetting The device has stopped respond- ing to the network, or there is a problem with the network connection (cable). SUPPORT For general information and support, go to the Intel support website at: http://support.intel.com. If an issue is identified with the released source code on the sup- ported kernel with a supported adapter, email the specific information related to the issue to <freebsd@intel.com>. SEE ALSO altq(4), arp(4), iflib(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8) HISTORY The ixgbe device driver first appeared in FreeBSD 7.0. AUTHORS The ixgbe driver was written by Intel Corporation <freebsd@intel.com>. FreeBSD 13.2 May 17, 2023 IXGBE(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | DIAGNOSTICS | SUPPORT | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ix&sektion=4&manpath=FreeBSD+14.1-RELEASE+and+Ports>