FreeBSD Manual Pages
SIGACTION(2) System Calls Manual SIGACTION(2) NAME sigaction -- software signal facilities LIBRARY Standard C Library (libc, -lc) SYNOPSIS #include <signal.h> struct sigaction { void (*sa_handler)(int); void (*sa_sigaction)(int, siginfo_t *, void *); int sa_flags; /* see signal options below */ sigset_t sa_mask; /* signal mask to apply */ }; int sigaction(int sig, const struct sigaction * restrict act, struct sigaction * restrict oact); DESCRIPTION The system defines a set of signals that may be delivered to a process. Signal delivery resembles the occurrence of a hardware interrupt: the sig- nal is normally blocked from further occurrence, the current thread context is saved, and a new one is built. A process may specify a handler to which a signal is delivered, or specify that a signal is to be ignored. A process may also specify that a default action is to be taken by the system when a signal occurs. A signal may also be blocked for a thread, in which case it will not be delivered to that thread until it is unblocked. The action to be taken on delivery is determined at the time of delivery. Nor- mally, signal handlers execute on the current stack of the thread. This may be changed, on a per-handler basis, so that signals are taken on a spe- cial signal stack. Signal routines normally execute with the signal that caused their invoca- tion blocked, but other signals may yet occur. A global signal mask de- fines the set of signals currently blocked from delivery to a thread. The signal mask for a thread is initialized from that of its parent (normally empty). It may be changed with a sigprocmask(2) or pthread_sigmask(3) call, or when a signal is delivered to the thread. When a signal condition arises for a process or thread, the signal is added to a set of signals pending for the process or thread. Whether the signal is directed at the process in general or at a specific thread depends on how it is generated. For signals directed at a specific thread, if the signal is not currently blocked by the thread then it is delivered to the thread. For signals directed at the process, if the signal is not cur- rently blocked by all threads then it is delivered to one thread that does not have it blocked (the selection of which is unspecified). Signals may be delivered any time a thread enters the operating system (e.g., during a system call, page fault or trap, or clock interrupt). If multiple signals are ready to be delivered at the same time, any signals that could be caused by traps are delivered first. Additional signals may be processed at the same time, with each appearing to interrupt the handlers for the previous signals before their first instructions. The set of pending sig- nals is returned by the sigpending(2) system call. When a caught signal is delivered, the current state of the thread is saved, a new signal mask is calculated (as described below), and the signal handler is invoked. The call to the handler is arranged so that if the signal handling routine re- turns normally the thread will resume execution in the context from before the signal's delivery. If the thread wishes to resume in a different con- text, then it must arrange to restore the previous context itself. When a signal is delivered to a thread a new signal mask is installed for the duration of the process' signal handler (or until a sigprocmask(2) sys- tem call is made). This mask is formed by taking the union of the current signal mask set, the signal to be delivered, and the signal mask associated with the handler to be invoked. The sigaction() system call assigns an action for a signal specified by sig. If act is non-NULL, it specifies an action (SIG_DFL, SIG_IGN, or a handler routine) and mask to be used when delivering the specified signal. If oact is non-NULL, the previous handling information for the signal is returned to the user. The above declaration of struct sigaction is not literal. It is provided only to list the accessible members. See <sys/signal.h> for the actual de- finition. In particular, the storage occupied by sa_handler and sa_sigaction overlaps, and it is nonsensical for an application to attempt to use both simultaneously. Once a signal handler is installed, it normally remains installed until an- other sigaction() system call is made, or an execve(2) is performed. A signal-specific default action may be reset by setting sa_handler to SIG_DFL. The defaults are process termination, possibly with core dump; no action; stopping the process; or continuing the process. See the signal list below for each signal's default action. If sa_handler is SIG_DFL, the default action for the signal is to discard the signal, and if a signal is pending, the pending signal is discarded even if the signal is masked. If sa_handler is set to SIG_IGN current and pending instances of the signal are ignored and discarded. Options may be specified by setting sa_flags. The meaning of the various bits is as follows: SA_NOCLDSTOP If this bit is set when installing a catching func- tion for the SIGCHLD signal, the SIGCHLD signal will be generated only when a child process exits, not when a child process stops. SA_NOCLDWAIT If this bit is set when calling sigaction() for the SIGCHLD signal, the system will not create zombie processes when children of the calling process exit. If the calling process subsequently issues a wait(2) (or equivalent), it blocks until all of the calling process's child processes terminate, and then returns a value of -1 with errno set to ECHILD. The same ef- fect of avoiding zombie creation can also be achieved by setting sa_handler for SIGCHLD to SIG_IGN. SA_ONSTACK If this bit is set, the system will deliver the sig- nal to the process on a signal stack, specified by each thread with sigaltstack(2). SA_NODEFER If this bit is set, further occurrences of the deliv- ered signal are not masked during the execution of the handler. SA_RESETHAND If this bit is set, the handler is reset back to SIG_DFL at the moment the signal is delivered. SA_RESTART See paragraph below. SA_SIGINFO If this bit is set, the handler function is assumed to be pointed to by the sa_sigaction member of struct sigaction and should match the prototype shown above or as below in "EXAMPLES". This bit should not be set when assigning SIG_DFL or SIG_IGN. If a signal is caught during the system calls listed below, the call may be forced to terminate with the error EINTR, the call may return with a data transfer shorter than requested, or the call may be restarted. Restart of pending calls is requested by setting the SA_RESTART bit in sa_flags. The affected system calls include open(2), read(2), write(2), sendto(2), recvfrom(2), sendmsg(2) and recvmsg(2) on a communications channel or a slow device (such as a terminal, but not a regular file) and during a wait(2) or ioctl(2). However, calls that have already committed are not restarted, but instead return a partial success (for example, a short read count). After a pthread_create(3) the signal mask is inherited by the new thread and the set of pending signals and the signal stack for the new thread are empty. After a fork(2) or vfork(2) all signals, the signal mask, the signal stack, and the restart/interrupt flags are inherited by the child. The execve(2) system call reinstates the default action for all signals which were caught and resets all signals to be caught on the user stack. Ignored signals remain ignored; the signal mask remains the same; signals that restart pending system calls continue to do so. The following is a list of all signals with names as in the include file <signal.h>: NAME Default Action Description SIGHUP terminate process terminal line hangup SIGINT terminate process interrupt program SIGQUIT create core image quit program SIGILL create core image illegal instruction SIGTRAP create core image trace trap SIGABRT create core image abort(3)call (formerly SIGIOT) SIGEMT create core image emulate instruction executed SIGFPE create core image floating-point exception SIGKILL terminate process kill program SIGBUS create core image bus error SIGSEGV create core image segmentation violation SIGSYS create core image non-existent system call invoked SIGPIPE terminate process write on a pipe with no reader SIGALRM terminate process real-time timer expired SIGTERM terminate process software termination signal SIGURG discard signal urgent condition present on socket SIGSTOP stop process stop (cannot be caught or ignored) SIGTSTP stop process stop signal generated from keyboard SIGCONT discard signal continue after stop SIGCHLD discard signal child status has changed SIGTTIN stop process background read attempted from control terminal SIGTTOU stop process background write attempted to control terminal SIGIO discard signal I/O is possible on a descriptor (see fcntl(2)) SIGXCPU terminate process cpu time limit exceeded (see setr- limit(2)) SIGXFSZ terminate process file size limit exceeded (see setr- limit(2)) SIGVTALRM terminate process virtual time alarm (see setitimer(2)) SIGPROF terminate process profiling timer alarm (see setitimer(2)) SIGWINCH discard signal window size change SIGINFO discard signal status request from keyboard SIGUSR1 terminate process user defined signal 1 SIGUSR2 terminate process user defined signal 2 NOTE The sa_mask field specified in act is not allowed to block SIGKILL or SIGSTOP. Any attempt to do so will be silently ignored. The following functions are either reentrant or not interruptible by sig- nals and are async-signal safe. Therefore applications may invoke them, without restriction, from signal-catching functions or from a child process after calling fork(2) in a multi-threaded process: Base Interfaces: _Exit(), _exit(), accept(), access(), alarm(), bind(), cfgetispeed(), cfge- tospeed(), cfsetispeed(), cfsetospeed(), chdir(), chmod(), chown(), close(), connect(), creat(), dup(), dup2(), execl(), execle(), execv(), ex- ecve(), faccessat(), fchdir(), fchmod(), fchmodat(), fchown(), fchownat(), fcntl(), _Fork(), fstat(), fstatat(), fsync(), ftruncate(), getegid(), ge- teuid(), getgid(), getgroups(), getpeername(), getpgrp(), getpid(), getp- pid(), getsockname(), getsockopt(), getuid(), kill(), link(), linkat(), listen(), lseek(), lstat(), mkdir(), mkdirat(), mkfifo(), mkfifoat(), mknod(), mknodat(), open(), openat(), pause(), pipe(), poll(), pselect(), pthread_sigmask(), raise(), read(), readlink(), readlinkat(), recv(), recvfrom(), recvmsg(), rename(), renameat(), rmdir(), select(), send(), sendmsg(), sendto(), setgid(), setpgid(), setsid(), setsockopt(), setuid(), shutdown(), sigaction(), sigaddset(), sigdelset(), sigemptyset(), sig- fillset(), sigismember(), signal(), sigpending(), sigprocmask(), sigsus- pend(), sleep(), sockatmark(), socket(), socketpair(), stat(), symlink(), symlinkat(), tcdrain(), tcflow(), tcflush(), tcgetattr(), tcgetpgrp(), tc- sendbreak(), tcsetattr(), tcsetpgrp(), time(), times(), umask(), uname(), unlink(), unlinkat(), utime(), wait(), waitpid(), write(). X/Open Systems Interfaces: sigpause(), sigset(), utimes(). Realtime Interfaces: aio_error(), clock_gettime(), timer_getoverrun(), aio_return(), fdata- sync(), sigqueue(), timer_gettime(), aio_suspend(), sem_post(), timer_set- time(). Base Interfaces not specified as async-signal safe by POSIX: fpathconf(), pathconf(), sysconf(). Base Interfaces not specified as async-signal safe by POSIX, but planned to be: ffs(), htonl(), htons(), memccpy(), memchr(), memcmp(), memcpy(), mem- move(), memset(), ntohl(), ntohs(), stpcpy(), stpncpy(), strcat(), strchr(), strcmp(), strcpy(), strcspn(), strlen(), strncat(), strncmp(), strncpy(), strnlen(), strpbrk(), strrchr(), strspn(), strstr(), strtok_r(), wcpcpy(), wcpncpy(), wcscat(), wcschr(), wcscmp(), wcscpy(), wcscspn(), wc- slen(), wcsncat(), wcsncmp(), wcsncpy(), wcsnlen(), wcspbrk(), wcsrchr(), wcsspn(), wcsstr(), wcstok(), wmemchr(), wmemcmp(), wmemcpy(), wmemmove(), wmemset(). Extension Interfaces: accept4(), bindat(), close_range(), closefrom(), connectat(), eaccess(), ffsl(), ffsll(), flock(), fls(), flsl(), flsll(), futimesat(), pipe2(), strlcat(). strlcpy(), strsep(). In addition, reading or writing errno is async-signal safe. All functions not in the above lists are considered to be unsafe with re- spect to signals. That is to say, the behaviour of such functions is unde- fined when they are called from a signal handler that interrupted an unsafe function. In general though, signal handlers should do little more than set a flag; most other actions are not safe. Also, it is good practice to make a copy of the global variable errno and restore it before returning from the signal handler. This protects against the side effect of errno being set by functions called from inside the sig- nal handler. RETURN VALUES The sigaction() function returns the value 0 if successful; otherwise the value -1 is returned and the global variable errno is set to indicate the error. EXAMPLES There are three possible prototypes the handler may match: ANSI C: void handler(int); Traditional BSD style: void handler(int, int code, struct sigcontext *scp); POSIX SA_SIGINFO: void handler(int, siginfo_t *info, ucontext_t *uap); The handler function should match the SA_SIGINFO prototype if the SA_SIGINFO bit is set in sa_flags. It then should be pointed to by the sa_sigaction member of struct sigaction. Note that you should not assign SIG_DFL or SIG_IGN this way. If the SA_SIGINFO flag is not set, the handler function should match either the ANSI C or traditional BSD prototype and be pointed to by the sa_handler member of struct sigaction. In practice, FreeBSD always sends the three arguments of the latter and since the ANSI C prototype is a subset, both will work. The sa_handler member declaration in FreeBSD include files is that of ANSI C (as required by POSIX), so a function pointer of a BSD-style function needs to be casted to compile without warning. The traditional BSD style is not portable and since its capabilities are a full subset of a SA_SIGINFO handler, its use is deprecated. The sig argument is the signal number, one of the SIG... values from <signal.h>. The code argument of the BSD-style handler and the si_code member of the info argument to a SA_SIGINFO handler contain a numeric code explaining the cause of the signal, usually one of the SI_... values from <sys/signal.h> or codes specific to a signal, i.e., one of the FPE_... values for SIGFPE. The scp argument to a BSD-style handler points to an instance of struct sigcontext. The uap argument to a POSIX SA_SIGINFO handler points to an instance of ucontext_t. ERRORS The sigaction() system call will fail and no new signal handler will be in- stalled if one of the following occurs: [EINVAL] The sig argument is not a valid signal number. [EINVAL] An attempt is made to ignore or supply a handler for SIGKILL or SIGSTOP. SEE ALSO kill(1), kill(2), ptrace(2), setitimer(2), setrlimit(2), sigaltstack(2), sigpending(2), sigprocmask(2), sigsuspend(2), wait(2), fpsetmask(3), setjmp(3), siginfo(3), siginterrupt(3), sigsetops(3), ucontext(3), tty(4) STANDARDS The sigaction() system call is expected to conform to ISO/IEC 9945-1:1990 ("POSIX.1"). The SA_ONSTACK and SA_RESTART flags are Berkeley extensions, as are the signals, SIGTRAP, SIGEMT, SIGBUS, SIGSYS, SIGURG, SIGIO, SIGXCPU, SIGXFSZ, SIGVTALRM, SIGPROF, SIGWINCH, and SIGINFO. Those signals are available on most BSD-derived systems. The SA_NODEFER and SA_RESETHAND flags are intended for backwards compatibility with other operating sys- tems. The SA_NOCLDSTOP, and SA_NOCLDWAIT flags are featuring options com- monly found in other operating systems. The flags are approved by Version 2 of the Single UNIX Specification ("SUSv2"), along with the option to avoid zombie creation by ignoring SIGCHLD. FreeBSD ports 15.quarterly December 1, 2023 SIGACTION(2)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | NOTE | RETURN VALUES | EXAMPLES | ERRORS | SEE ALSO | STANDARDS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sigaction&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>