FreeBSD Manual Pages
PRINTF(3) Library Functions Manual PRINTF(3) NAME printf, fprintf, sprintf, snprintf, asprintf, dprintf, vprintf, vfprintf, vsprintf, vsnprintf, vasprintf, vdprintf -- formatted output conversion LIBRARY Standard C Library (libc, -lc) SYNOPSIS #include <stdio.h> int printf(const char * restrict format, ...); int fprintf(FILE * restrict stream, const char * restrict format, ...); int sprintf(char * restrict str, const char * restrict format, ...); int snprintf(char * restrict str, size_t size, const char * restrict format, ...); int asprintf(char **ret, const char *format, ...); int dprintf(int fd, const char * restrict format, ...); #include <stdarg.h> int vprintf(const char * restrict format, va_list ap); int vfprintf(FILE * restrict stream, const char * restrict format, va_list ap); int vsprintf(char * restrict str, const char * restrict format, va_list ap); int vsnprintf(char * restrict str, size_t size, const char * restrict format, va_list ap); int vasprintf(char **ret, const char *format, va_list ap); int vdprintf(int fd, const char * restrict format, va_list ap); DESCRIPTION The printf() family of functions produces output according to a format as described below. The printf() and vprintf() functions write output to stdout, the standard output stream; fprintf() and vfprintf() write output to the given output stream; dprintf() and vdprintf() write out- put to the given file descriptor; sprintf(), snprintf(), vsprintf(), and vsnprintf() write to the character string str; and asprintf() and vasprintf() dynamically allocate a new string with malloc(3). These functions write the output under the control of a format string that specifies how subsequent arguments (or arguments accessed via the variable-length argument facilities of stdarg(3)) are converted for output. The asprintf() and vasprintf() functions set *ret to be a pointer to a buffer sufficiently large to hold the formatted string. This pointer should be passed to free(3) to release the allocated storage when it is no longer needed. If sufficient space cannot be allocated, asprintf() and vasprintf() will return -1 and set ret to be a NULL pointer. The snprintf() and vsnprintf() functions will write at most size-1 of the characters printed into the output string (the size'th character then gets the terminating `\0'); if the return value is greater than or equal to the size argument, the string was too short and some of the printed characters were discarded. The output is always null-termi- nated, unless size is 0. The sprintf() and vsprintf() functions effectively assume a size of INT_MAX + 1. The format string is composed of zero or more directives: ordinary characters (not %), which are copied unchanged to the output stream; and conversion specifications, each of which results in fetching zero or more subsequent arguments. Each conversion specification is intro- duced by the % character. The arguments must correspond properly (af- ter type promotion) with the conversion specifier. After the %, the following appear in sequence: o An optional field, consisting of a decimal digit string followed by a $, specifying the next argument to access. If this field is not provided, the argument following the last argument accessed will be used. Arguments are numbered starting at 1. If unaccessed argu- ments in the format string are interspersed with ones that are ac- cessed the results will be indeterminate. o Zero or more of the following flags: `#' The value should be converted to an "alternate form". For c, d, i, n, p, s, and u conversions, this option has no effect. For b and B conversions, a non-zero result has the string `0b' (or `0B' for B conversions) prepended to it. For o conversions, the precision of the number is increased to force the first character of the output string to a zero. For x and X conver- sions, a non-zero result has the string `0x' (or `0X' for X conversions) prepended to it. For a, A, e, E, f, F, g, and G conversions, the result will always contain a decimal point, even if no digits follow it (normally, a decimal point appears in the results of those conversions only if a digit follows). For g and G conversions, trailing zeros are not removed from the result as they would otherwise be. `0' (zero) Zero padding. For all conversions except n, the con- verted value is padded on the left with zeros rather than blanks. If a precision is given with a numeric conversion (b, B, d, i, o, u, i, x, and X), the 0 flag is ignored. `-' A negative field width flag; the converted value is to be left adjusted on the field boundary. Except for n conversions, the converted value is padded on the right with blanks, rather than on the left with blanks or zeros. A - overrides a 0 if both are given. ` ' (space) A blank should be left before a positive number pro- duced by a signed conversion (a, A, d, e, E, f, F, g, G, or i). `+' A sign must always be placed before a number produced by a signed conversion. A + overrides a space if both are used. `'' (apostrophe) Decimal conversions (d, u, or i) or the integral por- tion of a floating point conversion (f or F) should be grouped and separated by thousands using the non-mone- tary separator returned by localeconv(3). o An optional decimal digit string specifying a minimum field width. If the converted value has fewer characters than the field width, it will be padded with spaces on the left (or right, if the left- adjustment flag has been given) to fill out the field width. o An optional precision, in the form of a period . followed by an op- tional digit string. If the digit string is omitted, the precision is taken as zero. This gives the minimum number of digits to ap- pear for b, B, d, i, o, u, x, and X conversions, the number of dig- its to appear after the decimal-point for a, A, e, E, f, and F con- versions, the maximum number of significant digits for g and G con- versions, or the maximum number of characters to be printed from a string for s conversions. o An optional length modifier, that specifies the size of the argu- ment. The following length modifiers are valid for the b, B, d, i, n, o, u, x, or X conversion: Modifier d, i b, B, o, u, x, X n hh signed char unsigned char signed char * h short unsigned short short * l (ell) long unsigned long long * ll (ell ell) long long unsigned long long long long * j intmax_t uintmax_t intmax_t * t ptrdiff_t (see note) ptrdiff_t * wN intN_t uintN_t intN_t * wfN int_fastN_t uint_fastN_t int_fastN_t * z (see note) size_t (see note) q (deprecated) quad_t u_quad_t quad_t * Note: the t modifier, when applied to a b, B, o, u, x, or X conver- sion, indicates that the argument is of an unsigned type equivalent in size to a ptrdiff_t. The z modifier, when applied to a d or i conversion, indicates that the argument is of a signed type equiva- lent in size to a size_t. Similarly, when applied to an n conver- sion, it indicates that the argument is a pointer to a signed type equivalent in size to a size_t. The following length modifier is valid for the a, A, e, E, f, F, g, or G conversion: Modifier a, A, e, E, f, F, g, G l (ell) double (ignored, same behavior as without it) L long double The following length modifier is valid for the c or s conversion: Modifier c s l (ell) wint_t wchar_t * o A character that specifies the type of conversion to be applied. A field width or precision, or both, may be indicated by an asterisk `*' or an asterisk followed by one or more decimal digits and a `$' in- stead of a digit string. In this case, an int argument supplies the field width or precision. A negative field width is treated as a left adjustment flag followed by a positive field width; a negative preci- sion is treated as though it were missing. If a single format direc- tive mixes positional (nn$) and non-positional arguments, the results are undefined. The conversion specifiers and their meanings are: bBdiouxX The int (or appropriate variant) argument is converted to un- signed binary (b and B), signed decimal (d and i), unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal (x and X) notation. The letters "abcdef" are used for x conver- sions; the letters "ABCDEF" are used for X conversions. The precision, if any, gives the minimum number of digits that must appear; if the converted value requires fewer digits, it is padded on the left with zeros. DOU The long int argument is converted to signed decimal, un- signed octal, or unsigned decimal, as if the format had been ld, lo, or lu respectively. These conversion characters are deprecated, and will eventually disappear. eE The double argument is rounded and converted in the style [-]d.ddde+-dd where there is one digit before the decimal- point character and the number of digits after it is equal to the precision; if the precision is missing, it is taken as 6; if the precision is zero, no decimal-point character appears. An E conversion uses the letter `E' (rather than `e') to in- troduce the exponent. The exponent always contains at least two digits; if the value is zero, the exponent is 00. For a, A, e, E, f, F, g, and G conversions, positive and neg- ative infinity are represented as inf and -inf respectively when using the lowercase conversion character, and INF and -INF respectively when using the uppercase conversion charac- ter. Similarly, NaN is represented as nan when using the lowercase conversion, and NAN when using the uppercase con- version. fF The double argument is rounded and converted to decimal nota- tion in the style [-]ddd.ddd, where the number of digits af- ter the decimal-point character is equal to the precision specification. If the precision is missing, it is taken as 6; if the precision is explicitly zero, no decimal-point character appears. If a decimal point appears, at least one digit appears before it. gG The double argument is converted in style f or e (or F or E for G conversions). The precision specifies the number of significant digits. If the precision is missing, 6 digits are given; if the precision is zero, it is treated as 1. Style e is used if the exponent from its conversion is less than -4 or greater than or equal to the precision. Trailing zeros are removed from the fractional part of the result; a decimal point appears only if it is followed by at least one digit. aA The double argument is rounded and converted to hexadecimal notation in the style [-]0xh.hhhp[+-]d, where the number of digits after the hexadecimal-point character is equal to the precision specification. If the precision is missing, it is taken as enough to represent the floating-point number ex- actly, and no rounding occurs. If the precision is zero, no hexadecimal-point character appears. The p is a literal character `p', and the exponent consists of a positive or negative sign followed by a decimal number representing an exponent of 2. The A conversion uses the prefix "0X" (rather than "0x"), the letters "ABCDEF" (rather than "abcdef") to represent the hex digits, and the letter `P' (rather than `p') to separate the mantissa and exponent. Note that there may be multiple valid ways to represent floating-point numbers in this hexadecimal format. For exam- ple, 0x1.92p+1, 0x3.24p+0, 0x6.48p-1, and 0xc.9p-2 are all equivalent. FreeBSD 8.0 and later always prints finite non- zero numbers using `1' as the digit before the hexadecimal point. Zeroes are always represented with a mantissa of 0 (preceded by a `-' if appropriate) and an exponent of +0. C Treated as c with the l (ell) modifier. c The int argument is converted to an unsigned char, and the resulting character is written. If the l (ell) modifier is used, the wint_t argument shall be converted to a wchar_t, and the (potentially multi-byte) se- quence representing the single wide character is written, in- cluding any shift sequences. If a shift sequence is used, the shift state is also restored to the original state after the character. S Treated as s with the l (ell) modifier. s The char * argument is expected to be a pointer to an array of character type (pointer to a string). Characters from the array are written up to (but not including) a terminating NUL character; if a precision is specified, no more than the num- ber specified are written. If a precision is given, no null character need be present; if the precision is not specified, or is greater than the size of the array, the array must con- tain a terminating NUL character. If the l (ell) modifier is used, the wchar_t * argument is expected to be a pointer to an array of wide characters (pointer to a wide string). For each wide character in the string, the (potentially multi-byte) sequence representing the wide character is written, including any shift sequences. If any shift sequence is used, the shift state is also re- stored to the original state after the string. Wide charac- ters from the array are written up to (but not including) a terminating wide NUL character; if a precision is specified, no more than the number of bytes specified are written (in- cluding shift sequences). Partial characters are never writ- ten. If a precision is given, no null character need be present; if the precision is not specified, or is greater than the number of bytes required to render the multibyte representation of the string, the array must contain a termi- nating wide NUL character. p The void * pointer argument is printed in hexadecimal (as if by `%#x' or `%#lx'). n The number of characters written so far is stored into the integer indicated by the int * (or variant) pointer argument. No argument is converted. m Print the string representation of the error code stored in the errno variable at the beginning of the call, as returned by strerror(3). No argument is taken. % A `%' is written. No argument is converted. The complete conversion specification is `%%'. The decimal point character is defined in the program's locale (cate- gory LC_NUMERIC). In no case does a non-existent or small field width cause truncation of a numeric field; if the result of a conversion is wider than the field width, the field is expanded to contain the conversion result. RETURN VALUES These functions return the number of characters printed (not including the trailing `\0' used to end output to strings), except for snprintf() and vsnprintf(), which return the number of characters that would have been printed if the size were unlimited (again, not including the final `\0'). These functions return a negative value if an error occurs. EXAMPLES To print a date and time in the form "Sunday, July 3, 10:02", where weekday and month are pointers to strings: #include <stdio.h> fprintf(stdout, "%s, %s %d, %.2d:%.2d\n", weekday, month, day, hour, min); To print pi to five decimal places: #include <math.h> #include <stdio.h> fprintf(stdout, "pi = %.5f\n", 4 * atan(1.0)); To allocate a 128 byte string and print into it: #include <stdio.h> #include <stdlib.h> #include <stdarg.h> char *newfmt(const char *fmt, ...) { char *p; va_list ap; if ((p = malloc(128)) == NULL) return (NULL); va_start(ap, fmt); (void) vsnprintf(p, 128, fmt, ap); va_end(ap); return (p); } COMPATIBILITY The conversion formats %D, %O, and %U are not standard and are provided only for backward compatibility. The conversion format %m is also not standard and provides the popular extension from the GNU C library. The effect of padding the %p format with zeros (either by the 0 flag or by specifying a precision), and the benign effect (i.e., none) of the # flag on %n and %p conversions, as well as other nonsensical combina- tions such as %Ld, are not standard; such combinations should be avoided. ERRORS In addition to the errors documented for the write(2) system call, the printf() family of functions may fail if: [EILSEQ] An invalid wide character code was encountered. [ENOMEM] Insufficient storage space is available. [EOVERFLOW] The size argument exceeds INT_MAX + 1, or the return value would be too large to be represented by an int. SEE ALSO printf(1), errno(2), fmtcheck(3), scanf(3), setlocale(3), strerror(3), wprintf(3) STANDARDS Subject to the caveats noted in the "BUGS" section below, the fprintf(), printf(), sprintf(), vprintf(), vfprintf(), and vsprintf() functions conform to ANSI X3.159-1989 ("ANSI C89") and ISO/IEC 9899:1999 ("ISO C99"). With the same reservation, the snprintf() and vsnprintf() functions conform to ISO/IEC 9899:1999 ("ISO C99"), while dprintf() and vdprintf() conform to IEEE Std 1003.1-2008 ("POSIX.1"). HISTORY The functions asprintf() and vasprintf() first appeared in the GNU C library. These were implemented by Peter Wemm <peter@FreeBSD.org> in FreeBSD 2.2, but were later replaced with a different implementation from OpenBSD 2.3 by Todd C. Miller <Todd.Miller@courtesan.com>. The dprintf() and vdprintf() functions were added in FreeBSD 8.0. The %m format extension first appeared in the GNU C library, and was imple- mented in FreeBSD 12.0. BUGS The printf family of functions do not correctly handle multibyte char- acters in the format argument. SECURITY CONSIDERATIONS The sprintf() and vsprintf() functions are easily misused in a manner which enables malicious users to arbitrarily change a running program's functionality through a buffer overflow attack. Because sprintf() and vsprintf() assume an infinitely long string, callers must be careful not to overflow the actual space; this is often hard to assure. For safety, programmers should use the snprintf() interface instead. For example: void foo(const char *arbitrary_string, const char *and_another) { char onstack[8]; #ifdef BAD /* * This first sprintf is bad behavior. Do not use sprintf! */ sprintf(onstack, "%s, %s", arbitrary_string, and_another); #else /* * The following two lines demonstrate better use of * snprintf(). */ snprintf(onstack, sizeof(onstack), "%s, %s", arbitrary_string, and_another); #endif } The printf() and sprintf() family of functions are also easily misused in a manner allowing malicious users to arbitrarily change a running program's functionality by either causing the program to print poten- tially sensitive data "left on the stack", or causing it to generate a memory fault or bus error by dereferencing an invalid pointer. %n can be used to write arbitrary data to potentially carefully-se- lected addresses. Programmers are therefore strongly advised to never pass untrusted strings as the format argument, as an attacker can put format specifiers in the string to mangle your stack, leading to a pos- sible security hole. This holds true even if the string was built us- ing a function like snprintf(), as the resulting string may still con- tain user-supplied conversion specifiers for later interpolation by printf(). Always use the proper secure idiom: snprintf(buffer, sizeof(buffer), "%s", string); FreeBSD 13.2 September 5, 2023 PRINTF(3)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | RETURN VALUES | EXAMPLES | COMPATIBILITY | ERRORS | SEE ALSO | STANDARDS | HISTORY | BUGS | SECURITY CONSIDERATIONS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=snprintf&sektion=3&manpath=FreeBSD+14.0-RELEASE+and+Ports>