FreeBSD Manual Pages
nix-env --uninstall(1) General Commands Manual nix-env --uninstall(1) Name nix-env --uninstall - remove packages from user environment Synopsis nix-env {--uninstall | -e} drvnames^a| Description The uninstall operation creates a new user environment, based on the cur- rent generation of the active profile, from which the store paths desig- nated by the symbolic names drvnames are removed. Options The following options are allowed for all nix-env operations, but may not always have an effect. * --file / -f path Specifies the Nix expression (designated below as the active Nix expres- sion) used by the --install, --upgrade, and --query --available opera- tions to obtain derivations. The default is ~/.nix-defexpr. If the argument starts with http:// or https://, it is interpreted as the URL of a tarball that will be downloaded and unpacked to a temporary location. The tarball must include a single top-level directory contain- ing at least a file named default.nix. * --profile / -p path Specifies the profile to be used by those operations that operate on a profile (designated below as the active profile). A profile is a se- quence of user environments called generations, one of which is the cur- rent generation. * --dry-run For the --install, --upgrade, --uninstall, --switch-generation, --delete-generations and --rollback operations, this flag will cause nix-env to print what would be done if this flag had not been specified, without actually doing it. --dry-run also prints out which paths will be substituted (i.e., down- loaded) and which paths will be built from source (because no substitute is available). * --system-filter system By default, operations such as --query --available show derivations matching any platform. This option allows you to use derivations for the specified platform system. Common Options Most Nix commands accept the following command-line options: * --help Prints out a summary of the command syntax and exits. * --version Prints out the Nix version number on standard output and exits. * --verbose / -v Increases the level of verbosity of diagnostic messages printed on stan- dard error. For each Nix operation, the information printed on standard output is well-defined; any diagnostic information is printed on stan- dard error, never on standard output. This option may be specified repeatedly. Currently, the following ver- bosity levels exist: * 0 aErrors onlya Only print messages explaining why the Nix invocation failed. * 1 aInformationala Print useful messages about what Nix is doing. This is the default. * 2 aTalkativea Print more informational messages. * 3 aChattya Print even more informational messages. * 4 aDebuga Print debug information. * 5 aVomita Print vast amounts of debug information. * --quiet Decreases the level of verbosity of diagnostic messages printed on stan- dard error. This is the inverse option to -v / --verbose. This option may be specified repeatedly. See the previous verbosity levels list. * --log-format format This option can be used to change the output of the log format, with format being one of: * raw This is the raw format, as outputted by nix-build. * internal-json Outputs the logs in a structured manner. Warning While the schema itself is relatively stable, the format of the error-messages (namely of the msg-field) can change between re- leases. * bar Only display a progress bar during the builds. * bar-with-logs Display the raw logs, with the progress bar at the bottom. * --no-build-output / -Q By default, output written by builders to standard output and standard error is echoed to the Nix command's standard error. This option sup- presses this behaviour. Note that the builder's standard output and er- ror are always written to a log file in prefix/nix/var/log/nix. * --max-jobs / -j number Sets the maximum number of build jobs that Nix will perform in parallel to the specified number. Specify auto to use the number of CPUs in the system. The default is specified by the max-jobs configuration setting, which itself defaults to 1. A higher value is useful on SMP systems or to exploit I/O latency. Setting it to 0 disallows building on the local machine, which is useful when you want builds to happen only on remote builders. * --cores Sets the value of the NIX_BUILD_CORES environment variable in the invo- cation of builders. Builders can use this variable at their discretion to control the maximum amount of parallelism. For instance, in Nixpkgs, if the derivation attribute enableParallelBuilding is set to true, the builder passes the -jN flag to GNU Make. It defaults to the value of the cores configuration setting, if set, or 1 otherwise. The value 0 means that the builder should use all available CPU cores in the system. * --max-silent-time Sets the maximum number of seconds that a builder can go without produc- ing any data on standard output or standard error. The default is spec- ified by the max-silent-time configuration setting. 0 means no time- out. * --timeout Sets the maximum number of seconds that a builder can run. The default is specified by the timeout configuration setting. 0 means no timeout. * --keep-going / -k Keep going in case of failed builds, to the greatest extent possible. That is, if building an input of some derivation fails, Nix will still build the other inputs, but not the derivation itself. Without this op- tion, Nix stops if any build fails (except for builds of substitutes), possibly killing builds in progress (in case of parallel or distributed builds). * --keep-failed / -K Specifies that in case of a build failure, the temporary directory (usu- ally in /tmp) in which the build takes place should not be deleted. The path of the build directory is printed as an informational message. * --fallback Whenever Nix attempts to build a derivation for which substitutes are known for each output path, but realising the output paths through the substitutes fails, fall back on building the derivation. The most common scenario in which this is useful is when we have regis- tered substitutes in order to perform binary distribution from, say, a network repository. If the repository is down, the realisation of the derivation will fail. When this option is specified, Nix will build the derivation instead. Thus, installation from binaries falls back on in- stallation from source. This option is not the default since it is gen- erally not desirable for a transient failure in obtaining the substi- tutes to lead to a full build from source (with the related consumption of resources). * --readonly-mode When this option is used, no attempt is made to open the Nix database. Most Nix operations do need database access, so those operations will fail. * --arg name value This option is accepted by nix-env, nix-instantiate, nix-shell and nix- build. When evaluating Nix expressions, the expression evaluator will automatically try to call functions that it encounters. It can automat- ically call functions for which every argument has a default value (e.g., { argName ? defaultValue }: ...). With --arg, you can also call functions that have arguments without a default value (or override a default value). That is, if the evaluator encounters a function with an argument named name, it will call it with value value. For instance, the top-level default.nix in Nixpkgs is actually a func- tion: { # The system (e.g., `i686-linux') for which to build the packages. system ? builtins.currentSystem ... }: ... So if you call this Nix expression (e.g., when you do nix-env --in- stall --attr pkgname), the function will be called automatically us- ing the value builtins.currentSystem for the system argument. You can override this using --arg, e.g., nix-env --install --attr pkg- name --arg system \"i686-freebsd\". (Note that since the argument is a Nix string literal, you have to escape the quotes.) * --arg-from-file name path Pass the contents of file path as the argument name to Nix functions. * --arg-from-stdin name Pass the contents of stdin as the argument name to Nix functions. * --argstr name value This option is like --arg, only the value is not a Nix expression but a string. So instead of --arg system \"i686-linux\" (the outer quotes are to keep the shell happy) you can say --argstr system i686-linux. * --attr / -A attrPath Select an attribute from the top-level Nix expression being evaluated. (nix-env, nix-instantiate, nix-build and nix-shell only.) The attribute path attrPath is a sequence of attribute names separated by dots. For instance, given a top-level Nix expression e, the attribute path xorg.xorgserver would cause the expression e.xorg.xorgserver to be used. See nix-env --install for some concrete examples. In addition to attribute names, you can also specify array indices. For instance, the attribute path foo.3.bar selects the bar attribute of the fourth element of the array in the foo attribute of the top-level ex- pression. * --eval-store store-url The URL to the Nix store to use for evaluation, i.e. where to store de- rivations (.drv files) and inputs referenced by them. * --expr / -E Interpret the command line arguments as a list of Nix expressions to be parsed and evaluated, rather than as a list of file names of Nix expres- sions. (nix-instantiate, nix-build and nix-shell only.) For nix-shell, this option is commonly used to give you a shell in which you can build the packages returned by the expression. If you want to get a shell which contain the built packages ready for use, give your expression to the nix-shell --packages convenience flag instead. * -I / --include path Add an entry to the list of search paths used to resolve lookup paths. This option may be given multiple times. Paths added through -I take precedence over the nix-path configuration setting and the NIX_PATH environment variable. * --impure Allow access to mutable paths and repositories. * --option name value Set the Nix configuration option name to value. This overrides settings in the Nix configuration file (see nix.conf5). * --repair Fix corrupted or missing store paths by redownloading or rebuilding them. Note that this is slow because it requires computing a crypto- graphic hash of the contents of every path in the closure of the build. Also note the warning under nix-store --repair-path. Note See man nix.conf for overriding configuration settings with command line flags. Environment variables * NIX_PROFILE Location of the Nix profile. Defaults to the target of the symlink ~/.nix-profile, if it exists, or /nix/var/nix/profiles/default other- wise. Common Environment Variables Most Nix commands interpret the following environment variables: * IN_NIX_SHELL Indicator that tells if the current environment was set up by nix-shell. It can have the values pure or impure. * NIX_PATH A colon-separated list of search path entries used to resolve lookup paths. This environment variable overrides the value of the nix-path configura- tion setting. It can be extended using the -I option. Example $ export NIX_PATH=`/home/eelco/Dev:nixos-config=/etc/nixos If NIX_PATH is set to an empty string, resolving search paths will al- ways fail. Example $ NIX_PATH= nix-instantiate --eval '<nixpkgs>' error: file 'nixpkgs' was not found in the Nix search path (add it using $NIX_PATH or -I) * NIX_IGNORE_SYMLINK_STORE Normally, the Nix store directory (typically /nix/store) is not allowed to contain any symlink components. This is to prevent aimpurea builds. Builders sometimes acanonicalisea paths by resolving all symlink compo- nents. Thus, builds on different machines (with /nix/store resolving to different locations) could yield different results. This is generally not a problem, except when builds are deployed to machines where /nix/store resolves differently. If you are sure that youare not going to do that, you can set NIX_IGNORE_SYMLINK_STORE to 1. Note that if youare symlinking the Nix store so that you can put it on another file system than the root file system, on Linux youare better off using bind mount points, e.g., $ mkdir /nix $ mount -o bind /mnt/otherdisk/nix /nix Consult the mount 8 manual page for details. * NIX_STORE_DIR Overrides the location of the Nix store (default prefix/store). * NIX_DATA_DIR Overrides the location of the Nix static data directory (default pre- fix/share). * NIX_LOG_DIR Overrides the location of the Nix log directory (default pre- fix/var/log/nix). * NIX_STATE_DIR Overrides the location of the Nix state directory (default pre- fix/var/nix). * NIX_CONF_DIR Overrides the location of the system Nix configuration directory (de- fault sysconfdir/nix, i.e. /etc/nix on most systems). * NIX_CONFIG Applies settings from Nix configuration from the environment. The con- tent is treated as if it was read from a Nix configuration file. Set- tings are separated by the newline character. * NIX_USER_CONF_FILES Overrides the location of the Nix user configuration files to load from. The default are the locations according to the XDG Base Directory Speci- fication. See the XDG Base Directories sub-section for details. The variable is treated as a list separated by the : token. * TMPDIR Use the specified directory to store temporary files. In particular, this includes temporary build directories; these can take up substantial amounts of disk space. The default is /tmp. * NIX_REMOTE This variable should be set to daemon if you want to use the Nix daemon to execute Nix operations. This is necessary in multi-user Nix installa- tions. If the Nix daemon's Unix socket is at some non-standard path, this variable should be set to unix://path/to/socket. Otherwise, it should be left unset. * NIX_SHOW_STATS If set to 1, Nix will print some evaluation statistics, such as the num- ber of values allocated. * NIX_COUNT_CALLS If set to 1, Nix will print how often functions were called during Nix expression evaluation. This is useful for profiling your Nix expres- sions. * GC_INITIAL_HEAP_SIZE If Nix has been configured to use the Boehm garbage collector, this variable sets the initial size of the heap in bytes. It defaults to 384 MiB. Setting it to a low value reduces memory consumption, but will in- crease runtime due to the overhead of garbage collection. XDG Base Directories Nix follows the XDG Base Directory Specification. For backwards compatibility, Nix commands will follow the standard only when use-xdg-base-directories is enabled. New Nix commands (experimental) conform to the standard by default. The following environment variables are used to determine locations of var- ious state and configuration files: * [XDG_CONFIG_HOME]{#env-XDGCONFIGHOME} (default ~/.config) * [XDG_STATE_HOME]{#env-XDGSTATEHOME} (default ~/.local/state) * [XDG_CACHE_HOME]{#env-XDGCACHEHOME} (default ~/.cache) In addition, setting the following environment variables overrides the XDG base directories: * [NIX_CONFIG_HOME]{#env-NIXCONFIGHOME} (default $XDG_CONFIG_HOME/nix) * [NIX_STATE_HOME]{#env-NIXSTATEHOME} (default $XDG_STATE_HOME/nix) * [NIX_CACHE_HOME]{#env-NIXCACHEHOME} (default $XDG_CACHE_HOME/nix) When use-xdg-base-directories is enabled, the configuration directory is: 1. $NIX_CONFIG_HOME, if it is defined 2. Otherwise, $XDG_CONFIG_HOME/nix, if XDG_CONFIG_HOME is defined 3. Otherwise, ~/.config/nix. Likewise for the state and cache directories. Examples $ nix-env --uninstall gcc $ nix-env --uninstall '.*' (remove everything) nix-env --uninstall(1)
Name | Synopsis | Description | Options | Common Options | Environment variables | Common Environment Variables | Examples
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=nix-env-uninstall&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>